19-237A/BHR6GHC-M01/2T

SMD  B 19-237A/BHR6GHC-M01/2T Features ․Package in 8mm tape on 7〞diameter reel. ․Compatible with automatic placement equipment. ․Compatible with infrared and vapor phase reflow solder process. ․Multi-color type. ․Pb-free. Description ․The 19-237A SMD LED is much smaller than lead frame type components, thus enable smaller board size, higher packing density, reduced storage space and finally smaller equipment to be obtained. ․Besides, lightweight makes them ideal for miniature applications. etc. Applications ․Backlighting in dashboard and switch. ․Telecommunication: indicator and backlighting in telephone and fax. ․Flat backlight for LCD, switch and symbol. ․General use. 1 Copyright © 2010, Everlight All Rights Reserved. Release Date : 10-Dec.2013. Issue No: DSE-0008826 Ver.:2 Release Date:12/12/2013 　 Rev.2 狀態:Approved(正式發行) www.everlight.com DATASHEET SMD  B 19-237A/BHR6GHC-M01/2T Device Selection Guide Code Chip Materials Emitted Color BH InGaN Blue R6 AlGaInP Brilliant Red GH InGaN Brilliant Green 2 Copyright © 2010, Everlight All Rights Reserved. Release Date : 10-Dec-2013. Issue No: DSE-0008826 Ver.:2 Release Date:12/12/2013 　 Resin Color Water Clear Rev.2 狀態:Approved(正式發行) www.everlight.com DATASHEET SMD  B 19-237A/BHR6GHC-M01/2T Absolute Maximum Ratings (Ta=25℃) Parameter Symbol Reverse Voltage Forward Current Peak Forward Current Rating Unit VR 5 V IF 25 mA IFP (Duty 1/10 @1KHz) Power Dissipation Pd Electrostatic Discharge(HBM) ESD Code BH 100 R6 60 GH 100 BH 95 R6 60 GH 95 BH 150 R6 2000 GH 150 mA mW V Operating Temperature Topr -40 ~ +85 ℃ Storage Temperature Tstg -40 ~ +90 ℃ Soldering Temperature Tsol 3 Reflow Soldering : 260 ℃ for 10 sec. Hand Soldering : 350 ℃ for 3 sec. Copyright © 2010, Everlight All Rights Reserved. Release Date : 10-Dec-2013. Issue No: DSE-0008826 Ver.:2 Release Date:12/12/2013 　 Rev.2 狀態:Approved(正式發行) www.everlight.com DATASHEET SMD  B 19-237A/BHR6GHC-M01/2T Electro-Optical Characteristics (Ta=25℃) Parameter Symbol Luminous Intensity Viewing Angle Peak Wavelength Dominant Min. Typ. Max. Unit Iv 57.0 ----- 140 Mcd 2θ1/2 ----- 120 ----- Deg BH ----- 468 ----- R6 ----- 632 ----- GH ----- 518 ----- BH ----- 470 ----- R6 ----- 624 ----- λ p λ d Wavelength Spectrum Code Condition nm nm BH:IF=2mA R6:IF=4.7mA Radiation Bandwidth Forward Voltage Reverse Current △λ VF IR GH ----- 525 ----- BH ----- 25 ----- R6 ----- 20 ----- GH ----- 35 ----- BH 2.5 ----- 3.0 R6 1.6 ----- 2.2 GH 2.5 ----- 3.0 BH 50 R6 10 GH ----- ----- GH:IF=2.6mA nm V μA VR=5V 50 *When three LED dies are operated simultaneously. Note: 1. Tolerance of Luminous Intensity: ±11% 2. Tolerance of Forward Voltage: ±0.05V 4 Copyright © 2010, Everlight All Rights Reserved. Release Date : 10-Dec-2013. Issue No: DSE-0008826 Ver.:2 Release Date:12/12/2013 　 Rev.2 狀態:Approved(正式發行) www.everlight.com DATASHEET SMD  B 19-237A/BHR6GHC-M01/2T Bin Range of Luminous Intensity Bin Code Min. Max. P2 Q1 Q2 R1 57.0 72.0 90.0 112 72.0 90.0 112 140 Unit Condition BH:IF=2mA mcd R6:IF=4.7mA GH:IF=2.6mA Note: 1. Tolerance of Luminous Intensity: ±11% 5 Copyright © 2010, Everlight All Rights Reserved. Release Date : 10-Dec-2013. Issue No: DSE-0008826 Ver.:2 Release Date:12/12/2013 　 Rev.2 狀態:Approved(正式發行) www.everlight.com DATASHEET SMD  B 19-237A/BHR6GHC-M01/2T Chromaticity Coordinates Specifications for Bin Grading Bin Code 180 181 182 183 PW 01 PW 02 PW 03 PW 04 6 CIE_x CIE_y 0.257 0.220 0.257 0.245 0.282 0.255 0.282 0.230 0.282 0.230 0.282 0.255 0.307 0.265 0.307 0.240 0.307 0.240 0.307 0.265 0.332 0.275 0.332 0.250 0.332 0.250 0.332 0.275 0.357 0.285 0.357 0.260 0.257 0.245 0.257 0.270 0.282 0.280 0.282 0.255 0.282 0.255 0.282 0.280 0.307 0.290 0.307 0.307 0.265 0.265 0.307 0.290 0.332 0.300 0.332 0.275 0.332 0.275 0.332 0.300 0.357 0.310 0.357 0.285 Copyright © 2010, Everlight All Rights Reserved. Release Date : 10-Dec-2013. Issue No: DSE-0008826 Ver.:2 Release Date:12/12/2013 　 Rev.2 狀態:Approved(正式發行) Condition BH:IF=2mA R6:IF=4.7mA GH:IF=2.6mA www.everlight.com DATASHEET SMD  B 19-237A/BHR6GHC-M01/2T Chromaticity Coordinates Specifications for Bin Grading Bin Code PW 05 PW 06 PW 07 PW 08 Pw09 PW 10 PW 11 PW 12 CIE_x CIE_y 0.257 0.270 0.257 0.295 0.282 0.305 0.282 0.280 0.282 0.280 0.282 0.305 0.307 0.315 0.307 0.290 0.307 0.290 0.307 0.315 0.332 0.325 0.332 0.300 0.332 0.300 0.332 0.325 0.357 0.335 0.357 0.310 0.257 0.295 0.257 0.320 0.282 0.330 0.282 0.305 0.282 0.305 0.282 0.330 0.307 0.340 0.307 0.315 0.307 0.315 0.307 0.340 0.332 0.350 0.332 0.325 0.332 0.325 0.332 0.350 0.357 0.360 0.357 0.335 Condition BH:IF=2mA R6:IF=4.7mA GH:IF=2.6mA *When three LED dies are operated simultaneously. Notes: 1.The C.I.E. 1931 chromaticity diagram ( Tolerance ±0.01 ). 2.The products are sensitive to static electricity and care must be fully taken when handling products. 7 Copyright © 2010, Everlight All Rights Reserved. Release Date : 10-Dec-2013. Issue No: DSE-0008826 Ver.:2 Release Date:12/12/2013 　 Rev.2 狀態:Approved(正式發行) www.everlight.com DATASHEET SMD  B 19-237A/BHR6GHC-M01/2T CIE Chromaticity Diagram 8 Copyright © 2010, Everlight All Rights Reserved. Release Date : 10-Dec-2013. Issue No: DSE-0008826 Ver.:2 Release Date:12/12/2013 　 Rev.2 狀態:Approved(正式發行) www.everlight.com DATASHEET SMD  B 19-237A/BHR6GHC-M01/2T Typical Electro-Optical Characteristics Curves BH F o rw a rd C u rre n t v s . S p e c tr u m D is tr ib u tio n F o r w a r d V o lta g e IF (m A ) 100 75 F o rw a rd C u rre n t R e la tiv e lu m in o u s in te n s ity ( % ) T a = 2 5 °C T a = 2 5 °C 50 25 50 40 30 25 20 10 0 400 450 500 550 0 2 .6 600 W a v e le n g th λ ( n m ) R e la tiv e lu m in o u s in te n s ity ( % ) R e la tiv e lu m in o u s in te n s ity ( % ) 100 10 40 V F (V ) 60 80 100 T a = 2 5 °C 100 10 1 10 10 2 1 10 F o r w a r d C u r r e n t IF ( m A ) R a d ia tio n D ia g r a m F o r w a r d C u r r e n t D e r a tin g C u r v e 0° IF ( m A ) 4 .5 1000 A m b ie n t T e m p e r a tu r e T a ( °C ) F o rw a rd C u rre n t 4 .2 F o rw a rd C u rre n t A m b ie n t T e m p e r a tu r e 20 3 .8 L u m in o u s In te n s ity v s . 1000 0 3 .4 F o r w a r d V o lta g e L u m in o u s In te n s ity v s . 1 -6 0 -4 0 -2 0 3 .0 T a = 2 5 °C 10° 20° 50 30° 40 40° 1 .0 30 25 0 .9 20 50° 0 .8 60° 10 70° 0 .7 80° 0 0 20 40 60 85 100 90° 0 .5 0 .3 0 .1 0 .2 0 .4 0 .6 A m b ie n t T e m p e r a tu r e T a ( °C ) 9 Copyright © 2010, Everlight All Rights Reserved. Release Date : 10-Dec-2013. Issue No: DSE-0008826 Ver.:2 Release Date:12/12/2013 　 Rev.2 狀態:Approved(正式發行) www.everlight.com DATASHEET SMD  B 19-237A/BHR6GHC-M01/2T Typical Electro-Optical Characteristics Curves R6 F o rw a rd C u rre n t v s . S p e c tr u m D is tr ib u tio n F o r w a r d V o lta g e T a = 2 5 °C IF (m A ) 75 F o rw a rd C u rre n t R e la tiv e lu m in o u s in te n s ity ( % ) T a = 2 5 °C 100 50 25 50 40 30 25 20 10 0 500 550 600 650 0 1 .2 700 2 .4 2 .8 L u m in o u s In te n s ity v s . A m b ie n t T e m p e r a tu r e 1000 100 10 0 20 40 60 80 100 3 .0 V F (V ) F o rw a rd C u rre n t T a = 2 5 °C 1000 100 10 1 0 10 10 2 1 10 F o r w a r d C u r r e n t IF ( m A ) A m b ie n t T e m p e r a tu r e T a ( °C ) R a d ia tio n D ia g r a m F o r w a r d C u r r e n t D e r a tin g C u r v e IF (m A ) 2 .0 L u m in o u s In te n s ity v s . 1 -6 0 -4 0 -2 0 F o rw a rd C u rre n t 1 .6 F o r w a r d V o lta g e R e la tiv e lu m in o u s in te n s ity ( % ) R e la tiv e lu m in o u s in te n s ity ( % ) W a v e le n g th λ ( n m ) 0° 50 T a = 2 5 °C 10° 20° 30° 40 40° 30 1 .0 25 0 .9 20 50° 0 .8 10 60° 70° 0 .7 80° 0 90° 0 20 40 60 85 100 0 .5 0 .3 0 .1 0 .2 0 .4 0 .6 A m b ie n t T e m p e r a tu r e T a ( °C ) 10 Copyright © 2010, Everlight All Rights Reserved. Release Date : 10-Dec-2013. Issue No: DSE-0008826 Ver.:2 Release Date:12/12/2013 　 Rev.2 狀態:Approved(正式發行) www.everlight.com DATASHEET SMD  B 19-237A/BHR6GHC-M01/2T Typical Electro-Optical Characteristics Curves GH S p e c t r u m D is t r ib u tio n F o rw a rd C u rre n t v s . F o r w a r d V o lta g e T a = 2 5 °C 50 I (m A ) 40 F 75 F o rw a rd C u rre n t R e la tiv e lu m in o u s in te n s ity (%) Ta=25° 100 50 25 30 25 20 10 0 400 450 500 550 0 2 .6 600 3 .0 W a v e le n g t h λ ( n m ) (% ) R e la tiv e lu m in o u s in te n s ity (% ) R e la tiv e lu m in o u s in te n s ity 1000 100 10 20 40 60 80 F o rw a rd C u rre n t V F (V ) T a = 2 5 °C 100 10 1 10 100 10 10 F o rw a rd C u rre n t R a d ia tio n D ia g r a m F o r w a r d C u r r e n t D e r a tin g C u r v e 0° 50 I F( m A ) 4 .5 1000 A m b ie n t T e m p e r a tu r e T a ( °C ) F o rw a rd C u rre n t 4 .2 L u m in o u s In te n s it y v s A m b ie n t T e m p e r a t u r e 0 3 .8 F o r w a r d V o lta g e L u m in o u s I n t e n s ity v s . 1 -6 0 -4 0 -2 0 3 .4 10° IF ( m A ) T a = 2 5 °C 20° 30° 40 40° 30 1 .0 25 0 .9 20 50° 0 .8 10 60° 70° 0 .7 80° 0 90° 0 20 40 60 85 100 0 .5 0 .3 0 .1 0 .2 0 .4 0 .6 A m b ie n t T e m p e r a tu r e T a ( °C ) 11 Copyright © 2010, Everlight All Rights Reserved. Release Date : 10-Dec-2013. Issue No: DSE-0008826 Ver.:2 Release Date:12/12/2013 　 Rev.2 狀態:Approved(正式發行) www.everlight.com DATASHEET SMD  B 19-237A/BHR6GHC-M01/2T Package Dimension 1 .6 2 3 4 1 .6 1 A n o d e m a rk R ed 1 .1 0 .3 5 1 .0 1 .4 ± 0 .2 1 .3 5 0 .8 2 0 .5 5 0 .3 5 0 .9 2 3 0 .4 0 .8 0 .9 1 1 0 .2 5 ± 0 .1 4 0 .5 5 3 0 .6 5 ± 0 .1 0 .6 ± 0 .2 4 2 ± 0 .2 Suggested pad dimension is just for reference only. Please modify the pad dimension based on individual need. Note: Tolerances unless mentioned ±0.1mm. Unit = mm 12 Copyright © 2010, Everlight All Rights Reserved. Release Date : 10-Dec-2013. Issue No: DSE-0008826 Ver.:2 Release Date:12/12/2013 　 Rev.2 狀態:Approved(正式發行) www.everlight.com DATASHEET SMD  B 19-237A/BHR6GHC-M01/2T Moisture Resistant Packing Materials Label Explanation Pb EVERLIGHT CPN : P N : XXXXXXXXXXXXX RoHS XXXXXXXXXXXXX CAT : XXX QTY : XXX ‧CPN: Customer’s Product Number ‧P/N: Product Number ‧QTY: Packing Quantity ‧CAT: Luminous Intensity Rank ‧HUE: Chromaticity Coordinates & Dom. Wavelength Rank ‧REF: Forward Voltage Rank ‧LOT No: Lot Number HUE : XXX REF : XXX LO T NO : XXXXXXXXXX R e fe r e n c e : X X X X X X X X MADE IN TAIWAN Reel Dimensions Note: The tolerances unless mentioned is ±0.1mm ,Unit = mm 13 Copyright © 2010, Everlight All Rights Reserved. Release Date : 10-Dec-2013. Issue No: DSE-0008826 Ver.:2 Release Date:12/12/2013 　 Rev.2 狀態:Approved(正式發行) www.everlight.com DATASHEET SMD  B 19-237A/BHR6GHC-M01/2T Carrier Tape Dimensions: Loaded quantity 2000 PCS per reel 1 2 4 3 Note: The tolerances unless mentioned is ±0.1mm ,Unit = mm Moisture Resistant Packaging L abel 14 A lu m in u m m o is tu r e - p r o o f b a g D e s ic c a n t L abel Copyright © 2010, Everlight All Rights Reserved. Release Date : 10-Dec-2013. Issue No: DSE-0008826 Ver.:2 Release Date:12/12/2013 　 Rev.2 狀態:Approved(正式發行) www.everlight.com DATASHEET SMD  B 19-237A/BHR6GHC-M01/2T Precautions For Use 1. Over-current-proof Customer must apply resistors for protection, otherwise slight voltage shift will cause big current change ( Burn out will happen ). 2. Storage 2.1 Do not open moisture proof bag before the products are ready to use. 2.2 Before opening the package: The LEDs should be kept at 30℃ or less and 90%RH or less. 2.3 After opening the package: The LED's floor life is 1 year under 30℃ or less and 60% RH or less. If unused LEDs remain, it should be stored in moisture proof packages. 2.4 If the moisture absorbent material (silica gel) has faded away or the LEDs have exceeded the storage time, baking treatment should be performed using the following conditions. Baking treatment : 60±5℃ for 24 hours. 3. Soldering Condition 3.1 Pb-free solder temperature profile 2 6 0 °C M a x . A b o v e 2 5 5 °C 1 0sec. M ax. 3 0 s e c .M a x . 3 °C / s e c . M a x . 6 °C / s e c . M a x . A b o v e 2 1 7 °C P re -h e a tin g 60~ 150sec. 1 5 0 ~ 2 0 0 °C 60~ 120sec. 3.2 Reflow soldering should not be done more than two times. 3.3 When soldering, do not put stress on the LEDs during heating. 3.4 After soldering, do not warp the circuit board. 4.Soldering Iron Each terminal is to go to the tip of soldering iron temperature less than 350℃ for 3 seconds within once in less than the soldering iron capacity 25W. Leave two seconds and more intervals, and do soldering of each terminal. Be careful because the damage of the product is often started at the time of the hand solder. 5.Repairing Repair should not be done after the LEDs have been soldered. When repairing is unavoidable, a double-head soldering iron should be used (as below figure). It should be confirmed beforehand whether the characteristics of the LEDs will or will not be damaged by repairing. 15 Copyright © 2010, Everlight All Rights Reserved. Release Date : 10-Dec-2013. Issue No: DSE-0008826 Ver.:2 Release Date:12/12/2013 　 Rev.2 狀態:Approved(正式發行) www.everlight.com DATASHEET SMD  B 19-237A/BHR6GHC-M01/2T Application Restrictions High reliability applications such as military/aerospace, automotive safety/security systems, and medical equipment may require different product. If you have any concerns, please contact Everlight before using this product in your application. This specification guarantees the quality and performance of the product as an individual component. Do not use this product beyond the specification described in this document. 16 Copyright © 2010, Everlight All Rights Reserved. Release Date : 10-Dec-2013. Issue No: DSE-0008826 Ver.:2 Release Date:12/12/2013 　 Rev.2 狀態:Approved(正式發行) www.everlight.com