19-237A-BHR6GHC-A01-2T

EVERLIGHT ELECTRONICS CO.,LTD. Technical Data Sheet Full Color Chip LED 19-237A/BHR6GHC-A01/2T Features ․Package in 8mm tape on 7〞diameter reel. ․Compatible with automatic placement equipment. ․Compatible with infrared and vapor phase reflow solder process. ․Multi-color type. ․Pb-free. ․The product itself will remain within RoHS compliant version. Descriptions ․ The 19-237A SMD Taping is much smaller than lead frame type components, thus enable smaller board size, higher packing density, reduced storage space and finally smaller equipment to be obtained. ․Besides, lightweight makes them ideal for miniature applications. etc. Applications ․Automotive: backlighting in dashboard and switch. ․Telecommunication: indicator and backlighting in telephone and fax. ․Flat backlight for LCD, switch and symbol. ․General use. Device Selection Guide Chip Type BH R6 GH Material InGaN AlGaInP InGaN Emitted Color Blue Brilliant Red Brilliant Green Water Clear Lens Color Everlight Electronics Co., Ltd. Device No. : DSE-937-A01 http://www.everlight.com Prepared date: 21-Jul-2005 Rev. 1 Page: 1 of 12 Prepared by : Ashley Kuo EVERLIGHT ELECTRONICS CO.,LTD. 19-237A/BHR6GHC-A01/2T Package Outline Dimensions 1.6 B 2 1.6 1 3 4 Anode mark -G -B -R G 1.1 1.0 R 0.8 1 0.55 4 0.55 0.35 1 4 0.35 2 3 0.55 0.55 2 0.8 2.4 3 Note: The tolerances unless mentioned is ±0.1mm,Unit = mm Everlight Electronics Co., Ltd. Device No. : DSE-937-A01 http://www.everlight.com Prepared date: 21-Jul-2005 Rev. 1 Page: 2 of 12 Prepared by : Ashley Kuo EVERLIGHT ELECTRONICS CO.,LTD. 19-237A/BHR6GHC-A01/2T Absolute Maximum Ratings (Ta=25℃) Parameter Reverse Voltage Symbol VR Rating 5 BH:25 Forward Current IF R6:25 GH:25 Operating Temperature Storage Temperature Soldering Temperature Power Dissipation Topr Tstg Tsol Pd -40 ~ +85 -40 ~ +90 260 (for 5 seconds) BH:110 R6:60 GH:110 Peak Forward Current (Duty 1/10 @1KHz) BH:100 IFP R6:60 GH:100 Reflow Soldering : 260 ℃ for 10 sec. Soldering Temperature Tsol Hand Soldering : 350 ℃ for 3 sec. mA mW ℃ ℃ ℃ mA Unit V Everlight Electronics Co., Ltd. Device No. : DSE-937-A01 http://www.everlight.com Prepared date: 21-Jul-2005 Rev. 1 Page: 3 of 12 Prepared by : Ashley Kuo EVERLIGHT ELECTRONICS CO.,LTD. 19-237A/BHR6GHC-A01/2T Electro-Optical Characteristics (Ta=25℃) Parameter Symbol BH Min. 28.5 72 112 ----- Typ. 50 100 180 120 468 Max. Unit Condition Luminous Intensity Iv R6 GH ----- mcd IF=20mA Viewing Angle 2θ1/2 BH ----- deg IF=20mA Peak Wavelength λp R6 GH BH ----- 632 518 470 ----- nm IF=20mA Dominant Wavelength λd R6 GH BH ----- 624 525 35 ----- nm IF=20mA Spectrum Radiation Bandwidth △λ R6 GH BH ----- 20 35 3.3 ----- nm IF=20mA 3.9 2.4 3.9 50 10 50 μA VR=5V V IF=20mA Forward Voltage VF R6 GH BH ----- 2.0 3.3 Reverse Current IR R6 GH ----- ----- Notes: 1.Tolerance of Luminous Intensity ±10% 2.Tolerance of Forward Voltage ±0.05V Everlight Electronics Co., Ltd. Device No. : DSE-937-A01 http://www.everlight.com Prepared date: 21-Jul-2005 Rev. 1 Page: 4 of 12 Prepared by : Ashley Kuo EVERLIGHT ELECTRONICS CO.,LTD. 19-237A/BHR6GHC-A01/2T Typical Electro-Optical Characteristics Curves BH Everlight Electronics Co., Ltd. Device No. : DSE-937-A01 http://www.everlight.com Prepared date: 21-Jul-2005 Rev. 1 Page: 5 of 12 Prepared by : Ashley Kuo EVERLIGHT ELECTRONICS CO.,LTD. 19-237A/BHR6GHC-A01/2T Typical Electro-Optical Characteristics Curves R6 Everlight Electronics Co., Ltd. Device No. : DSE-937-A01 http://www.everlight.com Prepared date: 21-Jul-2005 Rev. 1 Page: 6 of 12 Prepared by : Ashley Kuo EVERLIGHT ELECTRONICS CO.,LTD. 19-237A/BHR6GHC-A01/2T Typical Electro-Optical Characteristics Curves GH Everlight Electronics Co., Ltd. Device No. : DSE-937-A01 http://www.everlight.com Prepared date: 21-Jul-2005 Rev. 1 Page: 7 of 12 Prepared by : Ashley Kuo EVERLIGHT ELECTRONICS CO.,LTD. 19-237A/BHR6GHC-A01/2T Label explanation CAT: Luminous Intensity Rank HUE: Dom. Wavelength Rank REF: Forward Voltage Rank Reel Dimensions Note: The tolerances unless mentioned is ±0.1mm ,Unit = mm Everlight Electronics Co., Ltd. Device No. : DSE-937-A01 http://www.everlight.com Prepared date: 21-Jul-2005 Rev. 1 Page: 8 of 12 Prepared by : Ashley Kuo EVERLIGHT ELECTRONICS CO.,LTD. 19-237A/BHR6GHC-A01/2T Carrier Tape Dimensions: Loaded quantity 2000 PCS per reel Note: The tolerances unless mentioned is ±0.1mm ,unit is mm. Moisture Resistant Packaging Label Aluminum moisture-proof bag Desiccant Label Everlight Electronics Co., Ltd. Device No. : DSE-937-A01 http://www.everlight.com Prepared date: 21-Jul-2005 Rev. 1 Page: 9 of 12 Prepared by : Ashley Kuo EVERLIGHT ELECTRONICS CO.,LTD. 19-237A/BHR6GHC-A01/2T Reliability Test Items And Conditions The reliability of products shall be satisfied with items listed below. Confidence level：90% LTPD：10% No. 1 Items Reflow Soldering Test Condition Temp. : 260℃±5℃ Min. 5sec. H : +100℃ 15min ∫ 5 min L : -40℃ 15min H : +100℃ 5min ∫ 10 sec L : -10℃ 5min Temp. : 100℃ Temp. : -40℃ IF = 20 mA 85℃/ 85%RH Test Sample Hours/Cycles Size 6 Min. 300 Cycles 22 PCS. Ac/Re 0/1 2 Temperature Cycle 22 PCS. 0/1 3 Thermal Shock High Temperature Storage Low Temperature Storage DC Operating Life High Temperature / High Humidity 300 Cycles 1000 Hrs. 1000 Hrs. 1000 Hrs. 1000 Hrs. 22 PCS. 0/1 4 5 6 7 22 PCS. 22 PCS. 22 PCS. 22 PCS. 0/1 0/1 0/1 0/1 Everlight Electronics Co., Ltd. Device No. : DSE-937-A01 http://www.everlight.com Prepared date: 21-Jul-2005 Rev. 1 Page: 10 of 12 Prepared by : Ashley Kuo EVERLIGHT ELECTRONICS CO.,LTD. 19-237A/BHR6GHC-A01/2T Precautions For Use 1. Over-current-proof Customer must apply resistors for protection, otherwise slight voltage shift will cause big current change ( Burn out will happen ). 2. Storage 2.1 Do not open moisture proof bag before the products are ready to use. 2.2 Before opening the package: The LEDs should be kept at 30℃ or less and 90%RH or less. 2.3 After opening the package : The LEDs should be kept at 30℃ or less and 70%RH or less(Floor life). However, it's recommended that the LEDs should be used within 168 hours (7 days) after opening the package. If unused LEDs remain, it should be stored in moisture proof packages. 2.4 If the moisture absorbent material (silica gel) has faded away or the LEDs have exceeded the storage time, baking treatment should be performed using the following conditions. Baking treatment : 60±5℃ for 24 hours. 3. Soldering Condition 3.1 Pb-free solder temperature profile 3.2 Reflow soldering should not be done more than two times. 3.3 When soldering, do not put stress on the LEDs during heating. 3.4 After soldering, do not warp the circuit board. Everlight Electronics Co., Ltd. Device No. : DSE-937-A01 http://www.everlight.com Prepared date: 21-Jul-2005 Rev. 1 Page: 11 of 12 Prepared by : Ashley Kuo EVERLIGHT ELECTRONICS CO.,LTD. 19-237A/BHR6GHC-A01/2T 4.Soldering Iron Each terminal is to go to the tip of soldering iron temperature less than 350℃ for 3 seconds within once in less than the soldering iron capacity 25W. Leave two seconds and more intervals, and do soldering of each terminal. Be careful because the damage of the product is often started at the time of the hand solder. 5.Repairing Repair should not be done after the LEDs have been soldered. When repairing is unavoidable, a double-head soldering iron should be used (as below figure). It should be confirmed beforehand whether the characteristics of the LEDs will or will not be damaged by repairing. EVERLIGHT ELECTRONICS CO., LTD. Office: No 25, Lane 76, Sec 3, Chung Yang Rd, Tucheng, Taipei 236, Taiwan, R.O.C Tel: 886-2-2267-2000, 2267-9936 Fax: 886-2267-6244, 2267-6189, 2267-6306 http://www.everlight.com Everlight Electronics Co., Ltd. Device No. : DSE-937-A01 http://www.everlight.com Prepared date: 21-Jul-2005 Rev. 1 Page: 12 of 12 Prepared by : Ashley Kuo