19-237D/BHR6GHC-C01/2T

Technical Data Sheet Full Color Chip LED 19-237D/BHR6GHC-C01/2T Features ․Package in 8mm tape on 7〞diameter reel. ․Compatible with automatic placement equipment. ․Compatible with infrared and vapor phase reflow solder process. ․Multi-color type. ․Pb-free. ․The product itself will remain within RoHS compliant version. Descriptions ․The 19-237D SMD LED is much smaller than lead frame type components, thus enable smaller board size, higher packing density, reduced storage space and finally smaller equipment to be obtained. ․ Besides, lightweight makes them ideal for miniature applications. etc. Applications ․Backlighting in dashboard and switch. ․Telecommunication: indicator and backlighting in telephone and fax. ․Flat backlight for LCD, switch and symbol. ․General use. Device Selection Guide Chip Type Material Emitted Color BH InGaN Blue R6 AlGaInP Brilliant Red GH InGaN Brilliant Green Resin Color Water Clear Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 2 Page: 1 of 13 Device No. : DSE-0003166 Prepared date: 17-Mar-2010 Prepared by : Jeff Tsai 19-237D/BHR6GHC-C01/2T Package Outline Dimensions 1 .6 C L R G 3 C L 1 .6 2 1 4 B C a th o d e m a rk 1 .1 0 .3 5 1 .0 3 1 4 0 .4 0 .4 0 .3 5 3 0 .5 5 2 2 0 .5 5 4 0 .3 5 0 .5 5 1 0 .5 5 0 .8 C a th o d e m a rk 0 .8 0 .8 0 .8 Note: The tolerances unless mentioned is ±0.1mm,Unit = mm Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 2 Page: 2 of 13 Device No. : DSE-0003166 Prepared date: 17-Mar-2010 Prepared by : Jeff Tsai 19-237D/BHR6GHC-C01/2T Absolute Maximum Ratings (Ta=25℃) Parameter Symbol Rating Unit Reverse Voltage VR 5 V BH:25 Forward Current IF mA R6:25 GH:25 Peak Forward Current (Duty 1/10 @1KHz) BH:100 IFP mA R6:60 GH:100 BH:110 Power Dissipation Pd mW R6:60 GH:110 BH:150 Electrostatic Discharge(HBM) ESD V R6:2000 GH:150 Operating Temperature Topr -40 ~ +85 ℃ Storage Temperature Tstg -40 ~ +90 ℃ Soldering Temperature Tsol Reflow Soldering : 260 ℃ for 10 sec. Hand Soldering : 350 ℃ for 3 sec. Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 2 Page: 3 of 13 Device No. : DSE-0003166 Prepared date: 17-Mar-2010 Prepared by : Jeff Tsai 19-237D/BHR6GHC-C01/2T Electro-Optical Characteristics (Ta=25℃) Parameter Luminous Intensity Viewing Angle Symbol Iv Min. BH 11.5 R6 18.0 GH 57.0 2θ1/2 ----- λp R6 ----- λd BH 465 R6 615 GH 520 △λ R6 ----- VF mcd IF=5mA ----- deg IF=5mA ----- nm IF=5mA nm IF=5mA nm IF=5mA V IF=5mA μA VR=5V 45.0 140 120 632 475 ----- 625 535 25 20 ----- GH Forward Voltage Condition 28.5 BH Spectrum Radiation Bandwidth Unit 518 GH Dominant Wavelength Max. 468 BH Peak Wavelength Typ. ----- 35 BH 2.60 2.85 3.10 R6 1.60 1.95 2.10 GH 2.60 2.85 3.10 50 BH Reverse Current IR R6 ----- ----- 10 50 GH Notes: 1.Tolerance of Luminous Intensity ±11% 2.Tolerance of Dominant Wavelength ±1nm 3.Tolerance of Forward Voltage ±0.1V Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 2 Page: 4 of 13 Device No. : DSE-0003166 Prepared date: 17-Mar-2010 Prepared by : Jeff Tsai 19-237D/BHR6GHC-C01/2T BH Bin Range Of Luminous Intensity Bin Min Max L 11.5 18.0 M 18.0 28.5 Unit Condition mcd IF=5mA Unit Condition mcd IF=5mA Unit Condition mcd IF =5mA Unit Condition nm IF=5mA R6 Bin Range Of Luminous Intensity Bin Min Max M 18.0 28.5 N 28.5 45.0 GH Bin Range Of Luminous Intensity Bin Min Max PA 57.0 90.0 QA 90.0 140 Bin Range Of Dom. Wavelength Bin Min Max X 520 525 Y 525 530 Z 530 535 Notes: 1.Tolerance of Luminous Intensity ±11% 2.Tolerance of Dominant Wavelength ±1nm Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 2 Page: 5 of 13 Device No. : DSE-0003166 Prepared date: 17-Mar-2010 Prepared by : Jeff Tsai 19-237D/BHR6GHC-C01/2T Typical Electro-Optical Characteristics Curves BH S p e c tr u m D is tr ib u tio n F o rw a rd C u rre n t v s . F o r w a r d V o lta g e T a = 2 5 °C 50 I (m A ) 100 40 F 75 F o rw a rd C u rre n t R e la tiv e lu m in o u s in te n s ity (% ) Ta=25° 50 25 30 25 20 10 0 400 450 500 550 0 2 .6 600 W a v e le n g th λ ( n m ) (% ) R e la tiv e lu m in o u s in te n s ity (% ) R e la tiv e lu m in o u s in te n s ity A m b ie n t T e m p e r a tu r e 100 10 20 40 60 3 .8 4 .2 4 .5 V F (V ) L u m in o u s In te n s ity v s 1000 0 3 .4 F o r w a r d V o lta g e L u m in o u s In te n s ity v s . 1 -6 0 -4 0 -2 0 3 .0 80 100 F o rw a rd C u rre n t T a = 2 5 °C 1000 f= 1 K H z D u ty = 1 /1 0 100 10 1 10 10 A m b ie n t T e m p e r a tu r e T a ( °C ) 10 F o rw a rd C u rre n t IF ( m A ) T a = 2 5 °C R a d ia tio n D ia g r a m F o r w a r d C u r r e n t D e r a tin g C u r v e 0° 50 10° 20° F o rw a rd C u rre n t I F( m A ) 30° 40 40° 30 1 .0 25 0 .9 20 50° 0 .8 60° 10 70° 0 .7 0 80° 20 0 40 60 85 90° 100 0 .5 0 .3 0 .1 0 .2 0 .4 0 .6 A m b ie n t T e m p e r a tu r e T a ( °C ) Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 2 Page: 6 of 13 Device No. : DSE-0003166 Prepared date: 17-Mar-2010 Prepared by : Jeff Tsai 19-237D/BHR6GHC-C01/2T Typical Electro-Optical Characteristics Curves R6 F o rw a rd C u rre n t v s . S p e c tr u m D is tr ib u tio n F o r w a r d V o lta g e 50 F o r w a r d C u r r e n t IF ( m A ) R e la tiv e L u m in o u s In te n s ity ( % ) T a = 2 5 °C T a = 2 5 °C 100 75 50 25 40 30 20 10 0 0 600 550 650 700 1 .6 750 1 .8 W a v e le n g th λ ( n m ) F o rw a rd C u rre n t R e la tiv e lu m in o u s in te n s ity ( % ) R e la tiv e L u m in o u s In te n s ity ( % ) 1000 100 10 20 40 2 .6 60 T a = 2 5 °C 1000 f= 1 K H z D u ty = 1 /1 0 100 10 1 0 10 80 100 1 10 3 10 2 10 F o r w a r d C u r r e n t IF ( m A ) A m b ie n t T e m p e r a tu r e T a ( °C ) R a d ia tio n D ia g r a m F o r w a r d C u r r e n t D e r a tin g C u r v e 0° 40 F o rw a rd C u rre n t I F (m A ) 2 .4 R e la tiv e L u m in o u s In te n s ity v s . A m b ie n t T e m p e r a tu r e 0 2 .2 F o r w a r d V o lta g e V F ( V ) R e la tiv e L u m in o u s In te n s ity v s . 1 -6 0 -4 0 -2 0 2 .0 10° T a = 2 5 °C 20° 30° 30 40° 1 .0 20 0 .9 50° 0 .8 60° 10 70° 0 .7 80° 90° 0 0 20 40 60 80 100 0 .5 0 .3 0 .1 0 .2 0 .4 0 .6 A m b ie n t T e m p e r a tu r e T a ( °C ) Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 2 Page: 7 of 13 Device No. : DSE-0003166 Prepared date: 17-Mar-2010 Prepared by : Jeff Tsai 19-237D/BHR6GHC-C01/2T Typical Electro-Optical Characteristics Curves GH S p e c tr u m D is tr ib u tio n F o rw a rd C u rre n t v s . F o r w a r d V o lta g e T a = 2 5 °C 50 I (m A ) 100 40 F 75 F o rw a rd C u rre n t R e la tiv e lu m in o u s in te n s ity (%) Ta=25° 50 25 30 25 20 10 0 450 400 500 550 0 2 .6 600 W a v e le n g th λ ( n m ) (% ) R e la tiv e lu m in o u s in te n s ity (% ) R e la tiv e lu m in o u s in te n s ity 1000 100 10 20 40 60 3 .8 4 .2 4 .5 V F (V ) L u m in o u s In te n s ity v s A m b ie n t T e m p e r a tu r e 0 3 .4 F o r w a r d V o lta g e L u m in o u s In te n s ity v s . 1 -6 0 -4 0 -2 0 3 .0 80 100 F o rw a rd C u rre n t T a = 2 5 °C 1000 f= 1 K H z D u ty = 1 /1 0 100 10 1 10 10 A m b ie n t T e m p e r a tu r e T a ( °C ) 10 F o rw a rd C u rre n t IF ( m A ) T a = 2 5 °C R a d ia tio n D ia g r a m F o r w a r d C u r r e n t D e r a tin g C u r v e 0° 50 10° 20° F o rw a rd C u rre n t I F( m A ) 30° 40 40° 30 1 .0 25 0 .9 20 50° 0 .8 60° 10 70° 0 .7 0 80° 20 0 40 60 85 90° 100 0 .5 0 .3 0 .1 0 .2 0 .4 0 .6 A m b ie n t T e m p e r a tu r e T a ( °C ) Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 2 Page: 8 of 13 Device No. : DSE-0003166 Prepared date: 17-Mar-2010 Prepared by : Jeff Tsai 19-237D/BHR6GHC-C01/2T Label explanation CAT: Luminous Intensity Rank HUE: Dom. Wavelength Rank REF: Forward Voltage Rank Pb EVERLIGHT CPN : P N : XXXXXXXXXXXXX R oH S XXXXXXXXXXXXX CAT : XXX QTY : XXX HUE : XXX REF : XXX LO T NO : XXXXXXXXXX R e fe r e n c e : X X X X X X X X MADE IN TAIWAN Reel Dimensions Note: The tolerances unless mentioned is ±0.1mm ,Unit = mm Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 2 Page: 9 of 13 Device No. : DSE-0003166 Prepared date: 17-Mar-2010 Prepared by : Jeff Tsai 19-237D/BHR6GHC-C01/2T Carrier Tape Dimensions: Loaded quantity 2000 PCS per reel Note: The tolerances unless mentioned is ±0.1mm ,unit is mm. Moisture Resistant Packaging L abel A lu m in u m m o is tu r e - p r o o f b a g D e s ic c a n t L abel Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 2 Page: 10 of 13 Device No. : DSE-0003166 Prepared date: 17-Mar-2010 Prepared by : Jeff Tsai 19-237D/BHR6GHC-C01/2T Reliability Test Items And Conditions The reliability of products shall be satisfied with items listed below. Confidence level：90% LTPD：10% Test Sample Hours/Cycles Size No. Items Test Condition 1 Reflow Soldering Temp. : 260℃±5℃ Max. 10sec. 6 Min. 22 PCS. 0/1 Temperature Cycle H : +100℃ 15min ∫ 5 min L : -40℃ 15min 300 Cycles 22 PCS. 0/1 Thermal Shock H : +100℃ 5min ∫ 10 sec L : -10℃ 5min 300 Cycles 22 PCS. 0/1 Temp. : 100℃ 1000 Hrs. 22 PCS. 0/1 Temp. : -40℃ 1000 Hrs. 22 PCS. 0/1 2 3 4 5 High Temperature Storage Low Temperature Storage Ac/Re 6 DC Operating Life IF = 20 mA 1000 Hrs. 22 PCS. 0/1 7 High Temperature / High Humidity 85℃/ 85%RH 1000 Hrs. 22 PCS. 0/1 Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 2 Page: 11 of 13 Device No. : DSE-0003166 Prepared date: 17-Mar-2010 Prepared by : Jeff Tsai 19-237D/BHR6GHC-C01/2T Precautions For Use 1. Over-current-proof Customer must apply resistors for protection, otherwise slight voltage shift will cause big current change ( Burn out will happen ). 2. Storage 2.1 Do not open moisture proof bag before the products are ready to use. 2.2 Before opening the package: The LEDs should be kept at 30℃ or less and 90%RH or less. 2.3 After opening the package : The LEDs should be kept at 30℃ or less and 70%RH or less(Floor life). However, it's recommended that the LEDs should be used within 168 hours (7 days) after opening the package. If unused LEDs remain, it should be stored in moisture proof packages. 2.4 If the moisture absorbent material (silica gel) has faded away or the LEDs have exceeded the storage time, baking treatment should be performed using the following conditions. Baking treatment : 60±5℃ for 24 hours. 3. Soldering Condition 3.1 Pb-free solder temperature profile 2 6 0 °C M a x . A b o v e 2 5 5 °C 1 0 sec. M ax . 3 0 s e c .M a x . 3 °C / s e c . M a x . 6 °C / s e c . M a x . A b o v e 2 1 7 °C P re -h e a tin g 60~ 150sec. 1 5 0 ~ 2 0 0 °C 60~ 120sec. 3.2 Reflow soldering should not be done more than two times. 3.3 When soldering, do not put stress on the LEDs during heating. 3.4 After soldering, do not warp the circuit board. Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 2 Page: 12 of 13 Device No. : DSE-0003166 Prepared date: 17-Mar-2010 Prepared by : Jeff Tsai 19-237D/BHR6GHC-C01/2T 4.Soldering Iron Each terminal is to go to the tip of soldering iron temperature less than 350℃ for 3 seconds within once in less than the soldering iron capacity 25W. Leave two seconds and more intervals, and do soldering of each terminal. Be careful because the damage of the product is often started at the time of the hand solder. 5.Repairing Repair should not be done after the LEDs have been soldered. When repairing is unavoidable, a double-head soldering iron should be used (as below figure). It should be confirmed beforehand whether the characteristics of the LEDs will or will not be damaged by repairing. EVERLIGHT ELECTRONICS CO., LTD. Office: No 25, Lane 76, Sec 3, Chung Yang Rd, Tucheng, Taipei 236, Taiwan, R.O.C Tel: 886-2-2267-2000, 2267-9936 Fax: 886-2267-6244, 2267-6189, 2267-6306 http://www.everlight.com Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 2 Page: 13 of 13 Device No. : DSE-0003166 Prepared date: 17-Mar-2010 Prepared by : Jeff Tsai