19-337/R6GHBHC-A01/2T

SMD
B 19-337/R6GHBHC-A01/2T Features ․Package in 8mm tape on 7〞diameter reel. ․Compatible with automatic placement equipment. ․Compatible with infrared and vapor phase reflow solder process. ․Full-color type. ․Pb-free ․The product itself will remain within RoHS compliant version. Description ․The 19-337 SMD LED is much smaller than lead frame type components, thus enable smaller board size, higher packing density, reduced storage space and finally smaller equipment to be obtained. ․Besides, lightweight makes them ideal for miniature applications. etc. Applications ․Backlighting in dashboard and switch. ․Telecommunication: indicator and backlighting in telephone and fax. ․Flat backlight for LCD, switch and symbol. ․General use. 1 Copyright © 2010, Everlight All Rights Reserved. Release Date : 21-May-2013. Issue No: DSE-0002657 Rev.4 www.everlight.com DATASHEET SMD
B 19-337/R6GHBHC-A01/2T Device Selection Guide Code Chip Materials Emitted Color R6 AlGaInP Brilliant Red GH InGaN Brilliant Green BH InGaN Blue 2 Copyright © 2010, Everlight All Rights Reserved. Release Date : 21-May-2013. Issue No: DSE-0002657 Resin Color Water Clear Rev.4 www.everlight.com DATASHEET SMD
B 19-337/R6GHBHC-A01/2T Absolute Maximum Ratings (Ta=25℃ ℃) Parameter Symbol Reverse Voltage Forward Current Peak Forward Current (Duty 1/10 @1KHz) Power Dissipation Electrostatic Discharge(HBM) Rating Unit VR 5 V IF 25 mA IFP Pd ESD Operating Temperature Topr Storage Temperature Tstg Soldering Temperature Tsol 3 Code R6 60 GH 100 BH 100 R6 60 GH 95 BH 95 R6 2000 GH 150 BH 150 mA mW V ℃ -40 ~ +85 ℃ Reflow Soldering : 260 ℃ for 10 sec. Hand Soldering : 350 ℃ for 3 sec. -40 ~ +90 Copyright © 2010, Everlight All Rights Reserved. Release Date : 21-May-2013. Issue No: DSE-0002657 Rev.4 www.everlight.com DATASHEET SMD
B 19-337/R6GHBHC-A01/2T Electro-Optical Characteristics (Ta=25℃ ℃) Parameter Symbol Luminous Intensity Viewing Angle Peak Wavelength Min. Typ. Max. R6 72.0 100 225 GH 140 180 285 BH 36.0 50.0 90.0 ----- 120 ----- R6 ----- 632 ----- GH ----- 518 ----- BH ----- 468 ----- R6 614 624 628 2θ1/2 λp Unit Condition mcd Deg nm IF=20mA Dominant λd Wavelength Spectrum Iv Code Radiation Bandwidth Forward Voltage Reverse Current △λ VF IR GH 518 525 528 BH 465 470 475 R6 ----- 20 ----- GH ----- 35 ----- BH ----- 25 ----- R6 1.7 ----- 2.4 GH 2.7 ----- 3.8 BH 2.7 ----- 3.8 R6 10 GH 50 BH ----- ----- nm nm V µA VR=5V 50 Note: 1. Tolerance of Luminous Intensity: ±11% 2. Tolerance of Dominant Wavelength: ±1nm 3. Tolerance of Forward Voltage: ±0.1V 4 Copyright © 2010, Everlight All Rights Reserved. Release Date : 21-May-2013. Issue No: DSE-0002657 Rev.4 www.everlight.com DATASHEET SMD
B 19-337/R6GHBHC-A01/2T R6 Bin Range of Luminous Intensity Bin Code Min. Max. Unit Condition Q1 Q2 R1 R2 S1 72.0 90,0 112 140 180 90.0 112 140 180 225 mcd IF=20mA GH Bin Range of Luminous Intensity Bin Code Min. Max. Unit Condition R2 S1 S2 140 180 225 180 225 285 mcd IF=20mA BH Bin Range of Luminous Intensity Bin Code Min. Max. Unit Condition N2 P1 P2 Q1 36.0 45.0 57.0 72.0 45.0 57.0 72.0 90.0 mcd IF=20mA Note: Tolerance of Luminous Intensity: ±11% 5 Copyright © 2010, Everlight All Rights Reserved. Release Date : 21-May-2013. Issue No: DSE-0002657 Rev.4 www.everlight.com DATASHEET SMD
B 19-337/R6GHBHC-A01/2T Typical Electro-Optical Characteristics Curves R6 Forward Current vs. Forward Voltage 75 50 25 50 40 30 25 20 10 0 500 550 600 650 Wavelength λ (nm) 0 1.2 700 Forward Current Relative luminous intensity (%) Relative luminous intensity (%) Ambient Temperature 1000 100 10 1 -60 -40 -20 1.6 2.0 2.4 2.8 3.0 Forward Voltage VF (V) Luminous Intensity vs. Luminous Intensity vs. 0 20 40 60 80 100 Ta=25°C 1000 100 10 1 0 10 10 1 10 2 Forward Current IF (mA) Ambient Temperature Ta (°C) Radiation Diagram Forward Current Derating Curve Forward Current IF (mA) Ta=25°C Ta=25°C 100 Forward Current IF (mA) Relative luminous intensity (%) Spectrum Distribution Ta=25°C 0° 10° 20° 50 30° 40 30 25 0.9 20 50° 0.8 10 0 40° 1.0 60° 70° 80° 90° 0.7 0 20 40 60 85 100 0.5 0.3 0.1 0.2 0.4 0.6 Ambient Temperature Ta (°C) 6 Copyright © 2010, Everlight All Rights Reserved. Release Date : 21-May-2013. Issue No: DSE-0002657 Rev.4 www.everlight.com DATASHEET SMD
B 19-337/R6GHBHC-A01/2T Typical Electro-Optical Characteristics Curves GH Spectrum Distribution Forward Current vs. Forward Voltage Ta=25°C 50 I (mA) 40 F 75 Forward Current Relative luminous intensity (%) Ta=25° 100 50 25 0 400 450 500 550 30 25 20 10 0 2.6 600 Relative luminous intensity (%) Relative luminous intensity (%) Luminous Intensity vs. Ambient Temperature 1000 100 10 0 3.4 1000 4.5 Luminous Intensity vs Forward Current Ta=25°C 10 1 10 20 40 60 80 100 10 10 Forward Current IF(mA) Radiation Diagram Forward Current Derating Curve 0° 50 IF(mA) 4.2 100 Ambient Temperature Ta (°C) Forward Current 3.8 Forward Voltage V F (V) Wavelength λ (nm) 1 -60 -40 -20 3.0 Ta=25°C 10° 20° 30° 40 30 25 20 10 0 40° 1.0 0.9 50° 0.8 60° 70° 80° 90° 0.7 0 20 40 60 85 100 0.5 0.3 0.1 0.2 0.4 0.6 Ambient Temperature Ta (°C) 7 Copyright © 2010, Everlight All Rights Reserved. Release Date : 21-May-2013. Issue No: DSE-0002657 Rev.4 www.everlight.com DATASHEET SMD
B 19-337/R6GHBHC-A01/2T Typical Electro-Optical Characteristics Curves BH Forward Current vs. Forward Voltage Ta=25°C 100 Forward Current IF (mA) Relative luminous intensity (%) Spectrum Distribution 75 50 25 0 400 450 500 550 40 30 25 20 10 0 2.6 600 Wavelength λ (nm) 3.8 4.2 Forward Current 1000 Relative luminous intensity (%) Relative luminous intensity (%) 3.4 4.5 Luminous Intensity vs. Ambient Temperature 100 10 0 20 40 60 80 100 Ta=25°C 1000 100 10 1 10 2 1 10 10 Forward Current IF (mA) Ambient Temperature Ta (°C) Radiation Diagram 0° 10° Forward Current Derating Curve Forward Current IF (mA) 3.0 Forward Voltage VF (V) Luminous Intensity vs. 1 -60 -40 -20 Ta=25°C 50 50 Ta=25°C 20° 30° 40 40° 1.0 30 25 20 10 0 0.9 50° 0.8 60° 70° 0.7 0 20 40 60 85 100 80° 90° 0.5 0.3 0.1 0.2 0.4 0.6 Ambient Temperature Ta (°C) 8 Copyright © 2010, Everlight All Rights Reserved. Release Date : 21-May-2013. Issue No: DSE-0002657 Rev.4 www.everlight.com DATASHEET SMD
B 19-337/R6GHBHC-A01/2T Package Dimension 1.6 1.6 1 4 2 5 6 3 Cathode Mark 0.35 0.2 1.1 1 1.6 1.9±0.3 1.35±0.2 5 1 4 2 5 6 3 0.1 0.4 0.4 Solder Mask 0.725±0.1 2 4 1 0.275±0.1 6 0.5±0.1 0.4±0.2 3 0.15 0.55±0.15 0.8 0.15 0.35 0.6 0.35 1.6 0.8 0.55±0.15 0.7±0.2 1.5±0.2 2.2±0.2 Suggested pad dimension is just for reference only. Please modify the pad dimension based on individual need. Note: Tolerances unless mentioned ±0.1mm. Unit = mm 9 Copyright © 2010, Everlight All Rights Reserved. Release Date : 21-May-2013. Issue No: DSE-0002657 Rev.4 www.everlight.com DATASHEET SMD
B 19-337/R6GHBHC-A01/2T Moisture Resistant Packing Materials Label Explanation Pb EVERLIGHT CPN : P N : XXXXXXXXXXXXX RoHS XXXXXXXXXXXXX CAT : XXX HUE : XXX REF : XXX QTY : XXX ‧CPN: Customer’s Product Number ‧P/N: Product Number ‧QTY: Packing Quantity ‧CAT: Luminous Intensity Rank ‧HUE: Chromaticity Coordinates & Dom. Wavelength Rank ‧REF: Forward Voltage Rank ‧LOT No: Lot Number LOT NO : XXXXXXXXXX Reference : XXXXXXXX MADE IN TAIWAN Reel Dimensions Note: The tolerances unless mentioned is ±0.1mm ,Unit = mm 10 Copyright © 2010, Everlight All Rights Reserved. Release Date : 21-May-2013. Issue No: DSE-0002657 Rev.4 www.everlight.com DATASHEET SMD
B 19-337/R6GHBHC-A01/2T Carrier Tape Dimensions: Loaded quantity 2000 PCS per reel Note: The tolerances unless mentioned is ±0.1mm ,Unit = mm Moisture Resistant Packaging Label 11 Aluminum moisture-proof bag Desiccant Label Copyright © 2010, Everlight All Rights Reserved. Release Date : 21-May-2013. Issue No: DSE-0002657 Rev.4 www.everlight.com DATASHEET SMD
B 19-337/R6GHBHC-A01/2T Precautions For Use 1. Over-current-proof Customer must apply resistors for protection, otherwise slight voltage shift will cause big current change ( Burn out will happen ). 2. Storage 2.1 Do not open moisture proof bag before the products are ready to use. 2.2 Before opening the package: The LEDs should be kept at 30 or less and 90%RH or less. 2.3 After opening the package: The LED's floor life is 1 year under 30 or less and 60% RH or less. If unused LEDs remain, it should be stored in moisture proof packages. 2.4 If the moisture absorbent material (silica gel) has faded away or the LEDs have exceeded the storage time, baking treatment should be performed using the following conditions. Baking treatment : 60 5 for 24 hours. 3. Soldering Condition 3.1 Pb-free solder temperature profile ℃ ℃ ±℃ 26 0°C M ax. 10 sec. M ax. A bo ve2 55 °C 30 sec.M ax. 3 °C /sec.M ax. 6°C /sec.M ax . P re-heating A bo ve 2 17 °C 60 ~ 15 0sec. 1 50~ 20 0°C 6 0~ 12 0sec. 3.2 Reflow soldering should not be done more than two times. 3.3 When soldering, do not put stress on the LEDs during heating. 3.4 After soldering, do not warp the circuit board. 4.Soldering Iron Each terminal is to go to the tip of soldering iron temperature less than 350 for 3 seconds within once in less than the soldering iron capacity 25W. Leave two seconds and more intervals, and do soldering of each terminal. Be careful because the damage of the product is often started at the time of the hand solder. ℃ 5.Repairing Repair should not be done after the LEDs have been soldered. When repairing is unavoidable, a double-head soldering iron should be used (as below figure). It should be confirmed beforehand whether the characteristics of the LEDs will or will not be damaged by repairing. 12 Copyright © 2010, Everlight All Rights Reserved. Release Date : 21-May-2013. Issue No: DSE-0002657 Rev.4 www.everlight.com DATASHEET SMD
B 19-337/R6GHBHC-A01/2T Application Restrictions High reliability applications such as military/aerospace, automotive safety/security systems, and medical equipment may require different product. If you have any concerns, please contact Everlight before using this product in your application. This specification guarantees the quality and performance of the product as an individual component. Do not use this product beyond the specification described in this document. 13 Copyright © 2010, Everlight All Rights Reserved. Release Date : 21-May-2013. Issue No: DSE-0002657 Rev.4 www.everlight.com