204-10ASUBW/S400-A5

Technical Data Sheet 204-10ASUBW/S400-A5 Features ․Popular T-1 3/4 diameter package. ․Choice of various viewing angles.  ․Available on tape and reel. ․Reliable and robust. . Pb free . ․The product remain within RoHS compliant ‧ESD-withstand voltage: up to 5KV version. Descriptions ․The series is specially designed for Applications requiring higher Brightness ․The LED lamps are available with Different colors,intensities,epoxy colors,etc. Applications ․TVset ․Monitor ․Telephone ․Computer Device Selection Guide Chip Lens Color Material Emitted Color InGaN Super Blue White Diffused 204-10ASUBW/S400-A5 Package Dimensions Notes: ․All dimensions are in millimeters, tolerance is 0.25mm except being specified. ․Lead spacing is measured where the lead emerges from the package. ․Protruded resin under flange is 1.5mm Max LED. Absolute Maximum Ratings (Ta=25℃) Parameter Forward Current Operating Temperature Symbol IF Topr Rating 30 -40 ~ +85 Units mA ℃ Storage Temperature Tstg ℃ Soldering Temperature Tsol Power Dissipation Reverse Voltage Pd VR -40 ~ +100 260 ±5 110 Zener Reverse Current Iz Electrostatic Discharge ESD Notes: Soldering time≦5 seconds. ℃ 5 mW V 100 5000 mA V 204-10ASUBW/S400-A5 Electro-Optical Characteristics (Ta=25℃) Parameter Luminous Intensity Symbol *Chip Rank Min. Typ. Max. Unit IV ----- 160 320 ----- mcd Viewing Angle 2θ1/2 ----- ----- 30 ----- deg Peak Wavelength λp ----- ----- 468 ----- Condition IF=20mA Dominant Wavelength λd ----- ----- 470 ----- Spectrum Radiation Bandwidth △λ ----- ----- 35 ----- Forward Voltage VF ----- ----- 3.4 4.0 V Zener Reverse Voltage Vz ----- ----- ----- 3.0 V nm Iz=5mA 204-10ASUBW/S400-A5 Typical Electro-Optical Characteristics Curves 204-10ASUBW/S400-A5 Reliability Test Items And Conditions The reliability of products shall be satisfied with items listed below. Confidence level：97% LTPD：3% NO Item Test Conditions Test Hours/Cycle 1 Solder Heat TEMP : 260℃ ± 5 ℃ 10 SEC 2 Temperature Cycle 3 Thermal Shock H : +100℃ 15min ∫ 5 min 300 CYCLES L : -40℃ 15min H : +100℃ 5min∫ 10sec L : -10℃ 5min High Temperature Storage 5 Low Temperature Storage TEMP : -40℃ 6 DC Operating Life TEMP : 25℃ IF = 20mA 1000 HRS 85℃ / 85% RH 1000 HRS 7 High Temperature / High Humidity 76 PCS 1000 HRS 1000 HRS Failure Judgment Criteria Iv≦Ivt*0.5 or Vf≧U 76 PCS or Vf≦L 300 CYCLES 76 PCS 4 TEMP : 100℃ Sample Size 76 PCS 76 PCS 76 PCS 76 PCS Note： Ivt：The test Iv value of the chip before the reliablility test Iv：The test value of the chip that has completed the reliablility test U：Upper Specification Limit Ac/Re 0/1 0/1 0/1 0/1 0/1 0/1 0/1 204-10ASUBW/S400-A5 Label Form Specification EVERLIGHT CPN: P/N: 204-10ASUBW/S400-A5 QTY： CAT: HUE: LOT NO： REF: CPN: Customer’s Production Number P/N : Production Number 204-10ASUBW/S400-A5:Production name QTY: Packing Quantity CAT: Ranks of Luminous and Forward Voltage HUE: Ranks of Dominant Wavelength REF: Reference LOT No: Lot Number MADE IN TAIWAN: Production Place MADE IN TAIWAN Notes 1. Above specification may be changed without notice. EVERLIGHT will reserve authority on material change for above specification. 2. When using this product, please observe the absolute maximum ratings and the instructions for using outlined in these specification sheets. EVERLIGHT assumes no responsibility for any damage resulting from use of the product which does not comply with the absolute maximum ratings and the instructions included in these specification sheets. 3. These specification sheets include materials protected under copyright of EVERLIGHT corporation. Please don’t reproduce or cause anyone to reproduce them without EVERLIGHT’s consent. 4. When the LED is connected using serial circuit, if either piece of LED is no light up but current can’t flow through causing others to light down. In new design, the LED is parallel with zener diode. if either piece of LED is no light up but current can flow through causing others to light up Current Current Old New