22-23B/R6GTBTW-C01/2C

Technical Data Sheet Full Color Chip LED (Chip LED with Right Angle Lens) 22-23B/R6GTBTW-C01/2C Features ․Package in 8mm tape on 7〞diameter reel. ․Compatible with automatic placement equipment. ․Compatible with infrared and vapor phase reflow solder process. ․Full-color type. ․Pb-free. ․The product itself will remain within RoHS compliant version. Descriptions ․The 22-23B SMD LED is much smaller than lead frame type components, thus enable smaller board size, higher packing density, reduced storage space and finally smaller equipment to be obtained. ․Besides, lightweight makes them ideal for miniature applications. etc. Applications ․Telecommunication: indicator and backlighting in telephone and fax. ․Flat backlight for LCD, switch and symbol. ․General use. Device Selection Guide Chip Type Material Emitted Color R6 AlGaInP Brilliant Red GT InGaN/SiC Brilliant Green BT InGaN/SiC Blue Everlight Electronics Co., Ltd. Device No. : DSE-0000617 http://www.everlight.com Prepared date: 03-Jul-2008 Resin Color White Diffused Rev. 1 Page: 1 of 13 Prepared by: Jay Chou 22-23B/R6GTBTW-C01/2C Package Outline Dimensions Note: The tolerances unless mentioned is ±0.1mm ,Unit = mm Everlight Electronics Co., Ltd. Device No. : DSE-0000617 http://www.everlight.com Prepared date: 03-Jul-2008 Rev. 1 Page: 2 of 13 Prepared by: Jay Chou 22-23B/R6GTBTW-C01/2C Absolute Maximum Ratings (Ta=25℃) Parameter Symbol Rating Unit Reverse Voltage VR 5 V R6:25 Forward Current GT:30 IF mA BT:30 Peak Forward Current (Duty 1/10 @1KHz) R6:60 GT:100 IFP mA BT:100 R6:60 Power Dissipation GT:120 Pd mW BT:120 R6:2000 Electrostatic Discharge(HBM) ESD V GT:1000 BT:1000 Operating Temperature Topr -40 ~ +85 ℃ Storage Temperature Tstg -40 ~ +90 ℃ Soldering Temperature Tsol Everlight Electronics Co., Ltd. Device No. : DSE-0000617 Reflow Soldering : 260 ℃ for 10 sec. Hand Soldering : 350 ℃ for 3 sec. http://www.everlight.com Prepared date: 03-Jul-2008 Rev. 1 Page: 3 of 13 Prepared by: Jay Chou 22-23B/R6GTBTW-C01/2C Electro-Optical Characteristics (Ta=25℃) Parameter Luminous Intensity Symbol Iv Viewing Angle Peak Wavelength 2θ1/2 λp Dominant Wavelength λd Spectrum Radiation Bandwidth Forward Voltage Reverse Current R6 GT BT R6 GT BT R6 GT BT △λ R6 GT BT VF R6 GT BT IR R6 GT BT Min. Typ. Max. 14.5 28.5 Condition mcd IF=5mA ----- deg IF=5mA ----- nm IF=5mA nm IF=5mA nm IF=5mA V IF=5mA μA VR=5V 36.0 ----- 112 11.5 ----- Unit 28.5 130 626 ----- 518 468 613.0 520.0 625.0 ----- 465.0 ----- 530.0 475.0 20 35 25 1.70 2.70 ----2.00 ----- 3.20 2.70 3.10 ----- 10 50 50 ----- Notes: 1.Tolerance of Luminous Intensity ±11% 2. Tolerance of Dominant Wavelength ±1nm 3.Tolerance of Forward Voltage ±0.1V Everlight Electronics Co., Ltd. Device No. : DSE-0000617 http://www.everlight.com Prepared date: 03-Jul-2008 Rev. 1 Page: 4 of 13 Prepared by: Jay Chou 22-23B/R6GTBTW-C01/2C R6 Bin Range Of Luminous Intensity Bin Min Max 1 14.5 22.5 2 22.5 36.0 Unit Condition mcd IF=5mA Unit Condition nm IF=5mA Unit Condition mcd IF=5mA Unit Condition nm IF=5mA Unit Condition mcd IF=5mA Bin Range Of Dom. Wavelength Bin Min Max 1 613 619 2 619 625 GT Bin Range Of Luminous Intensity Bin Min Max N 28.5 45.0 P 45.0 72.0 Q 72.0 112 Bin Range Of Dom. Wavelength Bin Min Max X 520 525 Y 525 530 BT Bin Range Of Luminous Intensity Bin Min Max L 11.5 18.0 M 18.0 28.5 Notes: 1.Tolerance of Luminous Intensity ±11% 2. Tolerance of Dominant Wavelength ±1nm Everlight Electronics Co., Ltd. Device No. : DSE-0000617 http://www.everlight.com Prepared date: 03-Jul-2008 Rev. 1 Page: 5 of 13 Prepared by: Jay Chou 22-23B/R6GTBTW-C01/2C Typical Electro-Optical Characteristics Curves R6 Forward Current vs. Forward Voltage Ta=25°C Forward Current IF (mA) 100 75 50 25 0 500 1000 550 600 650 Wavelength λ (nm) 40 30 25 20 10 1.6 2.0 2.4 2.8 3.0 Forward Voltage VF (V) Luminous Intensity vs. Luminous Intensity vs. Ambient Temperature Forward Current 100 10 1 -60 -40 -20 0 20 40 60 80 100 Ta=25°C 1000 100 10 1 0 10 10 1 10 2 Forward Current IF (mA) Ambient Temperature Ta (°C) Radiation Diagram 0° 10° Forward Current Derating Curve Forward Current IF (mA) Ta=25°C 50 0 1.2 700 Relative luminous intensity (%) Relative luminous intensity (%) Relative luminous intensity (%) Spectrum Distribution 50 Ta=25°C 20° 30° 40 30 25 20 10 0 40° 1.0 0.9 50° 0.8 60° 70° 0.7 0 20 40 60 85 100 Ambient Temperature Ta (°C) Everlight Electronics Co., Ltd. Device No. : DSE-0000617 http://www.everlight.com Prepared date: 03-Jul-2008 80° 90° 0.5 0.3 0.1 0.2 Rev. 1 0.4 0.6 Page: 6 of 13 Prepared by: Jay Chou 22-23B/R6GTBTW-C01/2C Typical Electro-Optical Characteristics Curves GT I (mA) 40 F 75 50 25 0 400 450 500 550 30 25 20 10 0 2.6 600 Luminous Intensity vs. Relative luminous intensity (%) Ambient Temperature 1000 100 10 1 -60 -40 -20 3.0 3.4 0 20 40 60 80 100 1000 4.5 f=1KHz Duty=1/10 100 10 1 10 10 10 Forward Current IF(mA) Radiation Diagram Forward Current Derating Curve 0° 50 IF(mA) 4.2 Luminous Intensity vs Forward Current Ta=25°C Ambient Temperature Ta (°C) Forward Current 3.8 Forward Voltage VF (V) Wavelength λ (nm) Relative luminous intensity (%) Forward Current vs. Forward Voltage Ta=25°C 50 100 Forward Current Relative luminous intensity (%) Spectrum Distribution Ta=25°C Ta=25°C 10° 20° 30° 40 40° 30 25 1.0 20 0.9 50° 0.8 60° 10 70° 0.7 0 20 0 40 60 85 100 Ambient Temperature Ta (°C) Everlight Electronics Co., Ltd. Device No. : DSE-0000617 http://www.everlight.com Prepared date: 03-Jul-2008 80° 90° 0.5 0.3 0.1 0.2 Rev. 1 0.4 0.6 Page: 7 of 13 Prepared by: Jay Chou 22-23B/R6GTBTW-C01/2C Typical Electro-Optical Characteristics Curves BT I (mA) 40 F 75 50 25 0 400 450 500 30 25 20 10 0 2.6 600 550 Luminous Intensity vs. Relative luminous intensity (%) Ambient Temperature 1000 100 10 1 -60 -40 -20 3.0 3.4 1000 4.5 f=1KHz Duty=1/10 100 10 1 10 0 20 40 60 80 100 10 10 Forward Current IF(mA) Radiation Diagram Forward Current Derating Curve 0° 50 IF(mA) 4.2 Luminous Intensity vs Forward Current Ta=25°C Ambient Temperature Ta (°C) Forward Current 3.8 Forward Voltage VF (V) Wavelength λ (nm) Relative luminous intensity (%) Forward Current vs. Forward Voltage Ta=25°C 50 100 Forward Current Relative luminous intensity (%) Spectrum Distribution Ta=25°C Ta=25°C 10° 20° 30° 40 40° 30 25 1.0 20 0.9 50° 0.8 60° 10 70° 0.7 0 20 0 40 60 85 Ambient Temperature Ta (°C) Everlight Electronics Co., Ltd. Device No. : DSE-0000617 80° 90° 100 http://www.everlight.com Prepared date: 03-Jul-2008 0.5 0.3 0.1 0.2 Rev. 1 0.4 0.6 Page: 8 of 13 Prepared by: Jay Chou 22-23B/R6GTBTW-C01/2C Label Explanation CAT: Luminous Intensity Rank HUE: Dom. Wavelength Rank Pb REF: Forward Voltage Rank CPN : P N : XXXXXXXXXXXXX EVERLIGHT RoHS XXXXXXXXXXXXX CAT : XXX HUE : XXX REF : XXX QTY : XXX LOT NO : XXXXXXXXXX MSL-2 Reference : XXXXXXXX MADE IN TAIWAN Reel Dimensions Note: The tolerances unless mentioned is ±0.1mm , Unit = mm Everlight Electronics Co., Ltd. Device No. : DSE-0000617 http://www.everlight.com Prepared date: 03-Jul-2008 Rev. 1 Page: 9 of 13 Prepared by: Jay Chou 22-23B/R6GTBTW-C01/2C Carrier Tape Dimensions: Loaded quantity 2000 PCS per reel Note: The tolerances unless mentioned is ±0.1mm ,Unit = mm Moisture Resistant Packaging Label Aluminum moisture-proof bag Everlight Electronics Co., Ltd. Device No. : DSE-0000617 http://www.everlight.com Prepared date: 03-Jul-2008 Desiccant Rev. 1 Label Page: 10 of 13 Prepared by: Jay Chou 22-23B/R6GTBTW-C01/2C Reliability Test Items And Conditions The reliability of products shall be satisfied with items listed below. Confidence level：90% LTPD：10% No. Items 1 Reflow Soldering 2 Temperature Cycle 3 Thermal Shock 4 5 6 7 High Temperature Storage Low Temperature Storage DC Operating Life High Temperature / High Humidity Everlight Electronics Co., Ltd. Device No. : DSE-0000617 Test Condition Temp. : 260℃±5℃ Min. 5sec. H : +100℃ 15min ∫ 5 min L : -40℃ 15min H : +100℃ 5min ∫ 10 sec L : -10℃ 5min Temp. : 100℃ Temp. : -40℃ Test Sample Hours/Cycles Size Ac/Re 6 Min. 22 PCS. 0/1 300 Cycles 22 PCS. 0/1 300 Cycles 22 PCS. 0/1 22 PCS. 0/1 22 PCS. 0/1 1000 Hrs. 1000 Hrs. IF = 20 mA 1000 Hrs. 22 PCS. 0/1 85℃/ 85%RH 1000 Hrs. 22 PCS. 0/1 http://www.everlight.com Prepared date: 03-Jul-2008 Rev. 1 Page: 11 of 13 Prepared by: Jay Chou 22-23B/R6GTBTW-C01/2C Precautions For Use 1. Over-current-proof Customer must apply resistors for protection, otherwise slight voltage shift will cause big current change ( Burn out will happen ). 2. Storage 2.1 Do not open moisture proof bag before the products are ready to use. 2.2 Before opening the package: The LEDs should be kept at 30℃ or less and 90%RH or less. 2.3 After opening the package: The LED's floor life is 1 year under 30℃ or less and 60% RH or less. If unused LEDs remain, it should be stored in moisture proof packages. 2.4 If the moisture absorbent material (silica gel) has faded away or the LEDs have exceeded the storage time, baking treatment should be performed using the following conditions. Baking treatment : 60±5℃ for 24 hours. 3. Soldering Condition 3.1 Pb-free solder temperature profile 1~5 °C / Sec. 260°C. Max. 10 Sec. Max. 1~5 °C / Sec. Pre-heating 180~200°C 60 Sec. Max. Above 220°C 120 Sec. Max. 3.2 Reflow soldering should not be done more than two times. 3.3 When soldering, do not put stress on the LEDs during heating. 3.4 After soldering, do not warp the circuit board. Everlight Electronics Co., Ltd. Device No. : DSE-0000617 http://www.everlight.com Prepared date: 03-Jul-2008 Rev. 1 Page: 12 of 13 Prepared by: Jay Chou 22-23B/R6GTBTW-C01/2C 4.Soldering Iron Each terminal is to go to the tip of soldering iron temperature less than 350℃ for 3 seconds within once in less than the soldering iron capacity 25W. Leave two seconds and more intervals, and do soldering of each terminal. Be careful because the damage of the product is often started at the time of the hand solder. 5.Repairing Repair should not be done after the LEDs have been soldered. When repairing is unavoidable, a double-head soldering iron should be used (as below figure). It should be confirmed beforehand whether the characteristics of the LEDs will or will not be damaged by repairing. EVERLIGHT ELECTRONICS CO., LTD. Office: No 25, Lane 76, Sec 3, Chung Yang Rd, Tucheng, Taipei 236, Taiwan, R.O.C Everlight Electronics Co., Ltd. Device No. : DSE-0000617 Tel: 886-2-2267-2000, 2267-9936 Fax: 886-2267-6244, 2267-6189, 2267-6306 http://www.everlight.com http://www.everlight.com Prepared date: 03-Jul-2008 Rev. 1 Page: 13 of 13 Prepared by: Jay Chou