23-215A-BHC-DN2P2E-5A

Technical Data Sheet Reverse Package Chip LED 23-215A/BHC-DN2P2E/5A Features ․Package in 8mm tape on 13〞diameter reel. ․Compatible with automatic placement equipment. ․Compatible with infrared and vapor phase reflow solder process. ․Mono-color type. ․Pb-Free. ․The product itself will remain within RoHS compliant version. Descriptions ․The 23-215A SMD LED is much smaller than `lead frame type components, thus enable smaller board size, higher packing density, reduced storage space and finally smaller equipment to be obtained. ․Besides, lightweight makes them ideal for miniature applications. etc. Applications ․Telecommunication: indicator and backlighting in telephone and fax. ․Flat backlight for LCD, switch and symbol. ․General use. Device Selection Guide Part No. 23-215A/BHC-DN2P2E/5A Chip Material InGaN Emitted Color Blue Resin Color Water Clear Everlight Electronics Co., Ltd. Device No. : DSE-0000738 http://www.everlight.com Prepared date: 14-Jan-2009 Rev. 1 Page: 1 of 10 Prepared by: Betty Lin 23-215A/BHC-DN2P2E/5A Package Outline Dimensions 3.2 2.0 0.6 2.0 0.6 0.2 0.6 0.8 Cathode Mark 1.0 2.4 1.0 Note: The tolerances unless mentioned is ±0.1mm,Unit = mm Everlight Electronics Co., Ltd. Device No. : DSE-0000738 http://www.everlight.com Prepared date: 14-Jan-2009 Rev. 1 Page: 2 of 11 Prepared by: Betty Lin 0.8 23-215A/BHC-DN2P2E/5A Absolute Maximum Ratings (Ta=25℃) Parameter Reverse Voltage Forward Current Peak Forward Current (Duty 1/10 @1KHz) Power Dissipation Electrostatic Discharge(HBM) Operating Temperature Storage Temperature Soldering Temperature Symbol VR IF IFP Pd ESD Topr Tstg Tsol Rating 5 25 100 95 150 -40 ~ +85 -40 ~ +90 Unit V mA mA mW V ℃ ℃ Reflow Soldering : 260 ℃ for 10 sec. Hand Soldering : 350 ℃ for 3 sec. Everlight Electronics Co., Ltd. Device No. : DSE-0000738 http://www.everlight.com Prepared date: 14-Jan-2009 Rev. 1 Page: 3 of 11 Prepared by: Betty Lin 23-215A/BHC-DN2P2E/5A Electro-Optical Characteristics (Ta=25℃) Parameter Luminous Intensity Viewing Angle Peak Wavelength Dominant Wavelength Spectrum Radiation Bandwidth Forward Voltage Reverse Current Symbol Iv 2θ1/2 λp λd △λ VF IR Min. 36 ------466 ---2.75 ---Typ. ---130 468 ---25 ------Max. 72 ------472 ---3.65 50 Unit mcd deg nm IF=20mA nm nm V μA VR=5V Condition Notes: 1.Tolerance of Luminous Intensity ±11% 2.Tolerance of Dominant Wavelength ±1nm 3.Tolerance of Forward Voltage ±0.1V Everlight Electronics Co., Ltd. Device No. : DSE-0000738 http://www.everlight.com Prepared date: 14-Jan-2009 Rev. 1 Page: 4 of 11 Prepared by: Betty Lin 23-215A/BHC-DN2P2E/5A Bin Range Of Luminous Intensity Bin N2 P1 P2 Min 36 45 57 Max 45 57 72 mcd IF=20mA Unit Condition Bin Range Of Dom. Wavelength Group D Bin AA2 AA3 AA4 Min 466 468 470 Max 468 470 472 nm IF=20mA Unit Condition Bin Range Of Forward Voltage Group E Bin 5 6 7 Min 2.75 3.05 3.35 Max 3.05 3.35 3.65 V IF=20mA Unit Condition Notes: 1.Tolerance of Luminous Intensity ±11% 2.Tolerance of Dominant Wavelength ±1nm 3.Tolerance of Forward Voltage ±0.1V Everlight Electronics Co., Ltd. Device No. : DSE-0000738 http://www.everlight.com Prepared date: 14-Jan-2009 Rev. 1 Page: 5 of 11 Prepared by: Betty Lin 23-215A/BHC-DN2P2E/5A Typical Electro-Optical Characteristics Curves Spectrum Distribution Relative luminous intensity (%) Forward Current IF (mA) 100 75 Ta=25°C Forward Current vs. Forward Voltage Ta=25°C 50 40 30 25 20 10 0 2.6 50 25 0 400 450 500 550 600 3.0 3.4 3.8 4.2 4.5 Wavelength λ (nm) Luminous Intensity vs. Relative luminous intensity (%) 1000 Ambient Temperature Relative luminous intensity (%) 1000 Forward Voltage VF (V) Luminous Intensity vs. Forward Current f=1KHz Duty=1/10 Ta=25°C 100 100 10 10 1 -60 -40 -20 0 20 40 60 80 100 1 10 10 1 10 2 Ambient Temperature Ta (°C) Forward Current Derating Curve Forward Current IF (mA) Forward Current IF (mA) Radiation Diagram 0° 10° Ta=25°C 20° 30° 50 40 30 25 20 10 0 0 20 1.0 0.9 0.8 0.7 40° 50° 60° 70° 80° 90° 0.5 0.3 0.1 0.2 0.4 0.6 40 60 85 100 Ambient Temperature Ta (°C) Everlight Electronics Co., Ltd. Device No. : DSE-0000738 http://www.everlight.com Prepared date: 14-Jan-2009 Rev. 1 Page: 6 of 11 Prepared by: Betty Lin 23-215A/BHC-DN2P2E/5A Label Explanation CAT: Luminous Intensity Rank HUE: Dom. Wavelength Rank REF: Forward Voltage Rank Pb EVERLIGHT RoHS CAT : XXX HUE : XXX REF : XXX CPN : P N : XXXXXXXXXXXXX XXXXXXXXXXXXX QTY : XXX LOT NO : XXXXXXXXXX Reference : XXXXXXXX MSL-2 MADE IN TAIWAN Reel Dimensions Note: The tolerances unless mentioned is ±0.1mm ,Unit = mm Everlight Electronics Co., Ltd. Device No. : DSE-0000738 http://www.everlight.com Prepared date: 14-Jan-2009 Rev. 1 Page: 7 of 11 Prepared by: Betty Lin 23-215A/BHC-DN2P2E/5A Carrier Tape Dimensions: Loaded quantity 5000 PCS per reel Note: The tolerances unless mentioned is ±0.1mm ,Unit = mm Moisture Resistant Packaging Label Aluminum moisture-proof bag Desiccant Label Everlight Electronics Co., Ltd. Device No. : DSE-0000738 http://www.everlight.com Prepared date: 14-Jan-2009 Rev. 1 Page: 8 of 11 Prepared by: Betty Lin 23-215A/BHC-DN2P2E/5A Reliability Test Items And Conditions The reliability of products shall be satisfied with items listed below. Confidence level：90% LTPD：10% No. 1 Items Reflow Soldering Test Condition Temp. : 260℃±5℃ Min. 5sec. H : +100℃ 15min ∫ 5 min L : -40℃ 15min H : +100℃ 5min ∫ 10 sec L : -10℃ 5min Temp. : 100℃ Temp. : -40℃ IF = 20 mA 85℃/ 85%RH Test Sample Hours/Cycles Size 6 Min. 300 Cycles 22 PCS. Ac/Re 0/1 2 Temperature Cycle 22 PCS. 0/1 3 Thermal Shock High Temperature Storage Low Temperature Storage DC Operating Life High Temperature / High Humidity 300 Cycles 1000 Hrs. 1000 Hrs. 1000 Hrs. 1000 Hrs. 22 PCS. 0/1 4 5 6 7 22 PCS. 22 PCS. 22 PCS. 22 PCS. 0/1 0/1 0/1 0/1 Everlight Electronics Co., Ltd. Device No. : DSE-0000738 http://www.everlight.com Prepared date: 14-Jan-2009 Rev. 1 Page: 9 of 11 Prepared by: Betty Lin 23-215A/BHC-DN2P2E/5A Precautions For Use 1. Over-current-proof Customer must apply resistors for protection, otherwise slight voltage shift will cause big current change ( Burn out will happen ). 2. Storage 2.1 Do not open moisture proof bag before the products are ready to use. 2.2 Before opening the package: The LEDs should be kept at 30℃ or less and 90%RH or less. 2.3 After opening the package: The LED's floor life is 1 year under 30℃ or less and 60% RH or less. If unused LEDs remain, it should be stored in moisture proof packages. 2.4 If the moisture absorbent material (silica gel) has faded away or the LEDs have exceeded the storage time, baking treatment should be performed using the following conditions. Baking treatment : 60±5℃ for 24 hours. 3. Soldering Condition 3.1 Pb-free solder temperature profile 3.2 Reflow soldering should not be done more than two times. 3.3 When soldering, do not put stress on the LEDs during heating. 3.4 After soldering, do not warp the circuit board. Everlight Electronics Co., Ltd. Device No. : DSE-0000738 http://www.everlight.com Prepared date: 14-Jan-2009 Rev. 1 Page: 10 of 11 Prepared by: Betty Lin 23-215A/BHC-DN2P2E/5A 4.Soldering Iron Each terminal is to go to the tip of soldering iron temperature less than 350℃ for 3 seconds within once in less than the soldering iron capacity 25W. Leave two seconds and more intervals, and do soldering of each terminal. Be careful because the damage of the product is often started at the time of the hand solder. 5.Repairing Repair should not be done after the LEDs have been soldered. When repairing is unavoidable, a double-head soldering iron should be used (as below figure). It should be confirmed beforehand whether the characteristics of the LEDs will or will not be damaged by repairing. EVERLIGHT ELECTRONICS CO., LTD. Office: No 25, Lane 76, Sec 3, Chung Yang Rd, Tucheng, Taipei 236, Taiwan, R.O.C Tel: 886-2-2267-2000, 2267-9936 Fax: 886-2267-6244, 2267-6189, 2267-6306 http://www.everlight.com Everlight Electronics Co., Ltd. Device No. : DSE-0000738 http://www.everlight.com Prepared date: 14-Jan-2009 Rev. 1 Page: 11 of 11 Prepared by: Betty Lin