57-21/R6C-AP1Q2B/BF

EVERLIGHT ELECTRONICS CO.,LTD. Technical Data Sheet Side View Red SMD LEDs 57-21/R6C-AP1Q2B/BF Features ˙Fluorescence Type ․High Luminous Intensity ․High Efficiency ․Pb-free. ․The product itself will remain with RoHS compliant version Descriptions The 57-21series is available in soft orange, green,blue and yellow. Due to the package design, the LED has wide viewing angle and optimized light coupling by inter reflector. This feature makes ideal for light pipe application. The low current requirement makes this device ideal for portable equipment or any other application where power is at a premium. Applications ․OA Equipment ․Backlighting of Full Color LCD ․Replacement of Conventional Light Bulbs and Fluorescent Lamps Device Selection Guide Chip Lens Color Revision Material Emitted Color AlGaInP Brilliant Red Water Clear Everlight Electronics Co., Ltd. http://www.everlight.com Device No. : DSE-0000692 Prepared date:05-Jan-2009 :1 LifecyclePhase: Rev. 1 Page:1 of 10 Prepared by: Ryan Chen Release Date:2009-05-11 22:09:23.0 Expired Period: Forever EVERLIGHT ELECTRONICS CO.,LTD. Technical Data Sheet Side View Red SMD LEDs 57-21/R6C-AP1Q2B/BF Package Dimensions Note: The tolerances unless mentioned is ±0.1mm ,Unit = mm Revision Everlight Electronics Co., Ltd. http://www.everlight.com Device No. : DSE-0000692 Prepared date:05-Jan-2009 :1 LifecyclePhase: Rev. 1 Page:2 of 10 Prepared by: Ryan Chen Release Date:2009-05-11 22:09:23.0 Expired Period: Forever EVERLIGHT ELECTRONICS CO.,LTD. Technical Data Sheet Side View Red SMD LEDs 57-21/R6C-AP1Q2B/BF Absolute Maximum Ratings (Ta=25℃) Parameter Symbol Rating Unit Reverse Voltage VR 5 V Forward Current IF 25 mA Peak Forward Current (Duty 1/10 @1KHz) IFP 60 mA Power Dissipation Pd 60 mW Electrostatic Discharge(HBM) ESD 2000 V Operating Temperature Topr -40 ~ +85 ℃ Storage Temperature Tstg -40 ~+100 ℃ Soldering Temperature Tsol Reflow Soldering : 260 ℃ for 10 sec. Hand Soldering : 350 ℃ for 3 sec. Electro-Optical Characteristics (Ta=25℃) Parameter Symbol Min. Typ. Max. Unit Condition Luminous Intensity Iv 45 ----- 112 mcd IF=20mA Viewing Angle 2θ1/2 ----- 120 ----- deg IF=20mA Peak Wavelength λp ----- 632 ----- nm IF=20mA Dominant Wavelength λd 617.5 ----- 633.5 nm IF=20mA Spectrum Radiation Bandwidth △λ ----- 20 ----- nm IF=20mA Forward Voltage VF 1.75 ----- 2.35 V IF=20mA Reverse Current IR ----- ----- 10 μA VR=5V Notes: 1.Tolerance of Luminous Intensity ±10% 2.Tolerance of Dominant Wavelength ±1nm 3.Tolerance of Forward Voltage ±0.1V Revision Everlight Electronics Co., Ltd. http://www.everlight.com Device No. : DSE-0000692 Prepared date:05-Jan-2009 :1 LifecyclePhase: Rev. 1 Page:3 of 10 Prepared by: Ryan Chen Release Date:2009-05-11 22:09:23.0 Expired Period: Forever EVERLIGHT ELECTRONICS CO.,LTD. Technical Data Sheet Side View Red SMD LEDs 57-21/R6C-AP1Q2B/BF Bin Range of Dominant Wavelength Group Bin Code Min. Max. E4 617.5 621.5 E5 621.5 625.5 E6 625.5 629.5 E7 629.5 633.5 A Unit Condition nm IF=20mA Unit Condition mcd IF=20mA Unit Condition V IF=20mA Bin Range of Luminous Intensity Bin Min Max P1 45 57 P2 57 72 Q1 72 90 Q2 90 112 Bin Range of Forward Voltage Group Bin Min Max 0 1.75 1.95 1 1.95 2.15 2 2.15 2.35 B Notes: 1. Tolerance of Dominant Wavelength ±1nm 2. Tolerance of Luminous Intensity ±10% 3.Tolerance of Forward Voltage ±0.1V Revision Everlight Electronics Co., Ltd. http://www.everlight.com Device No. : DSE-0000692 Prepared date:05-Jan-2009 :1 LifecyclePhase: Rev. 1 Page:4 of 10 Prepared by: Ryan Chen Release Date:2009-05-11 22:09:23.0 Expired Period: Forever EVERLIGHT ELECTRONICS CO.,LTD. Technical Data Sheet Side View Red SMD LEDs 57-21/R6C-AP1Q2B/BF Typical Electro-Optical Characteristics Curves ` Spectrum Distribution Ta=25°C 50 Forward Current I F (mA) 100 Relative luminous intensity (%) Forward Current vs. Forward Voltage 75 50 25 0 550 600 650 700 Wavelength λ (nm) 10 1.6 2.0 100 10 20 40 60 80 100 1000 2.8 3.0 f=1KHz Duty=1/10 100 10 1 0 10 Ambient Temperature T a (°C) 2 1 10 10 Forward Current I F (mA) Radiation Diagram Forward Current Derating Curve 0° 40 Forward Current IF (mA) 2.4 Relative Luminous Intensity vs. Forward Current Ta=25°C Relative luminous intensity (%) Relative luminous intensity (%) 20 Forward Voltage VF (V) 1000 0 30 1.2 Relative Luminous Intensity vs. Ambient Temperature 1 -60 -40 -20 40 0 750 Ta=25°C 10° 3 10 Ta=25°C 20° 30° 30 40° 1.0 20 0.9 50° 0.8 60° 10 70° 0.7 0 0 20 40 60 80 100 80° 90° 0.5 0.3 0.1 0.2 0.4 0.6 Ambient Temperature T a (°C) Revision Everlight Electronics Co., Ltd. http://www.everlight.com Device No. : DSE-0000692 Prepared date:05-Jan-2009 :1 LifecyclePhase: Rev. 1 Page:5 of 10 Prepared by: Ryan Chen Release Date:2009-05-11 22:09:23.0 Expired Period: Forever EVERLIGHT ELECTRONICS CO.,LTD. Technical Data Sheet Side View Red SMD LEDs 57-21/R6C-AP1Q2B/BF Label Explanation Pb CAT: Luminous Intensity Rank EVERLIGHT CPN : P N : XXXXXXXXXXXXX HUE: Dom. Wavelength Rank RoHS XXXXXXXXXXXXX REF: Forward Voltage Rank CAT : XXX HUE : XXX REF : XXX QTY : XXX LOT NO : XXXXXXXXXX Reference : XXXXXXXX MADE IN TAIWAN Reel Dimensions Note: The tolerances unless mentioned is ±0.1mm ,Unit = mm Revision Everlight Electronics Co., Ltd. http://www.everlight.com Device No. : DSE-0000692 Prepared date:05-Jan-2009 :1 LifecyclePhase: Rev. 1 Page:6 of 10 Prepared by: Ryan Chen Release Date:2009-05-11 22:09:23.0 Expired Period: Forever EVERLIGHT ELECTRONICS CO.,LTD. Technical Data Sheet Side View Red SMD LEDs 57-21/R6C-AP1Q2B/BF Carrier Tape Dimensions: Loaded Quantity 500 pcs Per Reel. Note: The tolerances unless mentioned is ±0.1mm ,Unit = mm Moisture Resistant Packaging Label Revision Aluminum moisture-proof bag Everlight Electronics Co., Ltd. http://www.everlight.com Device No. : DSE-0000692 Prepared date:05-Jan-2009 :1 LifecyclePhase: Desiccant Rev. 1 Label Page:7 of 10 Prepared by: Ryan Chen Release Date:2009-05-11 22:09:23.0 Expired Period: Forever EVERLIGHT ELECTRONICS CO.,LTD. Technical Data Sheet Side View Red SMD LEDs 57-21/R6C-AP1Q2B/BF Reliability Test Items and Conditions The reliability of products shall be satisfied with items listed below. Confidence level：90% LTPD：10% Items Test Condition 1 Reflow Soldering Temp. : 260℃±5℃ Min. 5sec. 6 min 22 PCS. 0/1 Temperature Cycle H : +100℃ 15min ∫ 5 min L : -40℃ 15min 300 Cycles 22 PCS. 0/1 3 Thermal Shock H : +100℃ 5min ∫ 10 sec L : -10℃ 5min 300 Cycles 22 PCS. 0/1 4 High Temperature Storage Temp. : 100℃ 1000 Hrs. 22 PCS. 0/1 5 Low Temperature Storage Temp. : -40℃ 1000 Hrs. 22 PCS. 0/1 6 DC Operating Life IF = 20 mA 1000 Hrs. 22 PCS. 0/1 7 High Temperature / High Humidity 85℃/ 85%RH 1000 Hrs. 22 PCS. 0/1 2 Revision Test Sample Ac/Re Hours/Cycles Size No. Everlight Electronics Co., Ltd. http://www.everlight.com Device No. : DSE-0000692 Prepared date:05-Jan-2009 :1 LifecyclePhase: Rev. 1 Page:8 of 10 Prepared by: Ryan Chen Release Date:2009-05-11 22:09:23.0 Expired Period: Forever EVERLIGHT ELECTRONICS CO.,LTD. Technical Data Sheet Side View Red SMD LEDs 57-21/R6C-AP1Q2B/BF Precautions For Use 1. Over-current-proof Customer must apply resistors for protection, otherwise slight voltage shift will cause big current change ( Burn out will happen ). 2. Storage 2.1 Do not open moisture proof bag before the products are ready to use. 2.2 Before opening the package: The LEDs should be kept at 30℃ or less and 90%RH or less. 2.3 After opening the package: The LED's floor life is 48 hours under 30℃ or less and 60% RH or less. If unused LEDs remain, it should be stored in moisture proof packages. 2.4 If the moisture absorbent material (silica gel) has faded away or the LEDs have exceeded the storage time, baking treatment should be performed using the following conditions. Baking treatment : 60±5℃ for 24 hours. 3. Soldering Condition 3.1 Pb-free solder temperature profile 1~5 °C / Sec. 260°C. Max. 10 Sec. Max. 1~5 °C / Sec. Pre-heating 180~200°C 60 Sec. Max. Above 220°C 120 Sec. Max. 3.2 Reflow soldering should not be done more than two times. 3.3 When soldering, do not put stress on the LEDs during heating. 3.4 After soldering, do not warp the circuit board. Revision Everlight Electronics Co., Ltd. http://www.everlight.com Device No. : DSE-0000692 Prepared date:05-Jan-2009 :1 LifecyclePhase: Rev. 1 Page:9 of 10 Prepared by: Ryan Chen Release Date:2009-05-11 22:09:23.0 Expired Period: Forever EVERLIGHT ELECTRONICS CO.,LTD. Technical Data Sheet Side View Red SMD LEDs 57-21/R6C-AP1Q2B/BF 4. Soldering Iron Each terminal is to go to the tip of soldering iron temperature less than 350℃ for 3 seconds within once in less than the soldering iron capacity 25W. Leave two seconds and more intervals, and do soldering of each terminal. Be careful because the damage of the product is often started at the time of the hand solder. 5. Repairing Repair should not be done after the LEDs have been soldered. When repairing is unavoidable, a double-head soldering iron should be used (as below figure). It should be confirmed beforehand whether the characteristics of the LEDs will or will not be damaged by repairing. EVERLIGHT ELECTRONICS CO., LTD. Office: No 25, Lane 76, Sec 3, Chung Yang Rd, Tucheng, Taipei 236, Taiwan, R.O.C Revision Tel: 886-2-2267-2000, 2267-9936 Fax: 886-2267-6244, 2267-6189, 2267-6306 http://www.everlight.com Everlight Electronics Co., Ltd. http://www.everlight.com Device No. : DSE-0000692 Prepared date:05-Jan-2009 :1 LifecyclePhase: Rev. 1 Page:10 of 10 Prepared by: Ryan Chen Release Date:2009-05-11 22:09:23.0 Expired Period: Forever