57-21SURC-S530-XX-TR8

EVERLIGHT ELECTRONICS CO.,LTD. Technical Data Sheet(Preliminary) Side View Red SMD LEDs 57-21SURC/S530-XX/TR8 Features ˙Fluorescence Type ˙High Luminous Intensity ˙High Efficiency ˙Pb-free. ˙The product itself will remain with RoHS compliant version Descriptions The 57-21series is available in soft orange, green,blue and yellow. Due to the package design, the LED has wide viewing angle and optimized light coupling by inter reflector. This feature makes ideal for light pipe application. The low current requirement makes this device ideal for portable equipment or any other application where power is at a premium. Applications ˙OA Equipment ˙Backlighting of Full Color LCD ˙Automotive Equipment ˙Replacement of Conventional Light Bulbs and Fluorescent Lamps Device Selection Guide Chip Lens Color Material AlGaInP Emitted Color Brilliant Red Water Clear Everlight Electronics Co., Ltd. Device No. : http://www.everlight.com Date:18-Jan-2006 Rev. 1 Page: 1 of 10 Prepared by:Rita Shen EVERLIGHT ELECTRONICS CO.,LTD. 57-21SURC/S530-XX/TR8 Package Dimensions Note: The tolerances unless mentioned is ±0.1mm ,Unit = mm Everlight Electronics Co., Ltd. Device No. : http://www.everlight.com Date:18-Jan-2006 Rev. 1 Page: 2 of 10 Prepared by:Rita Shen EVERLIGHT ELECTRONICS CO.,LTD. 57-21SURC/S530-XX/TR8 Absolute Maximum Ratings (Ta=25℃) Parameter Reverse Voltage Forward Current Operating Temperature Storage Temperature Electrostatic Discharge(HBM) Power Dissipation Peak Forward Current (Duty 1/10 @1KHz) Soldering Temperature Symbol VR IF Topr Tstg ESD Pd IFP Tsol Rating 5 25 -40 ~ +85 -40 ~ +100 2000 60 60 Unit V mA ℃ ℃ V mW mA Reflow Soldering : 260 ℃ for 10 sec. Hand Soldering : 350 ℃ for 3 sec. Everlight Electronics Co., Ltd. Device No. : http://www.everlight.com Date:18-Jan-2006 Rev. 1 Page: 3 of 10 Prepared by:Rita Shen EVERLIGHT ELECTRONICS CO.,LTD. 57-21SURC/S530-XX/TR8 Electro-Optical Characteristics (Ta=25℃) Parameter Symbol *Chip Rank A3 A4 Luminous Intensity Iv A5 A6 A7 Viewing Angle Peak Wavelength Dominant Wavelength Min. 40 50 63 80 125 ----------------1.7 ----- Typ. 68 82 99 135 215 120 632 624 20 2.0 ----- Max. --------------------------------- Unit Condition mcd IF=20mA 2θ1/2 λp λd ------------------------- deg nm nm IF=20mA IF=20mA IF=20mA Spectrum Radiation Bandwidth Forward Voltage Reverse Current △λ VF IR ----2.4 10 nm V IF=20mA IF=20mA VR=5V *57-21SURC/S530-XX/TR8 Chip Rank Everlight Electronics Co., Ltd. Device No. : http://www.everlight.com Date:18-Jan-2006 Rev. 1 Prepared by:Rita Shen μ A Page: 4 of 10 EVERLIGHT ELECTRONICS CO.,LTD. 57-21SURC/S530-XX/TR8 Typical Electro-Optical Characteristics Curves Everlight Electronics Co., Ltd. Device No. : http://www.everlight.com Date:18-Jan-2006 Rev. 1 Page: 5 of 10 Prepared by:Rita Shen EVERLIGHT ELECTRONICS CO.,LTD. 57-21SURC/S530-XX/TR8 Label explanation CAT: Luminous Intensity Rank HUE: Dom. Wavelength Rank REF: Forward Voltage Rank Reel Dimensions Note: The tolerances unless mentioned is ±0.1mm ,Unit = mm Everlight Electronics Co., Ltd. Device No. : http://www.everlight.com Date:18-Jan-2006 Rev. 1 Page: 6 of 10 Prepared by:Rita Shen EVERLIGHT ELECTRONICS CO.,LTD. 57-21SURC/S530-XX/TR8 Carrier Tape Dimensions: Loaded quantity 2000 PCS per reel. Note: The tolerances unless mentioned is ±0.1mm ,Unit = mm Moisture Resistant Packaging Label Aluminum moisture-proof bag Desiccant Label Everlight Electronics Co., Ltd. Device No. : http://www.everlight.com Date:18-Jan-2006 Rev. 1 Page: 7 of 10 Prepared by:Rita Shen EVERLIGHT ELECTRONICS CO.,LTD. 57-21SURC/S530-XX/TR8 Reliability Test Items And Conditions The reliability of products shall be satisfied with items listed below. Confidence level：90% LTPD：10% No. Items Test Condition Temp. : 260℃±5℃ Min. 5sec. H : +100℃ 15min ∫ 5 min L : -40℃ 15min H : +100℃ 5min ∫ 10 sec L : -10℃ 5min Temp. : 100℃ Test Sample Ac/Re Hours/Cycles Size 1 Reflow Soldering 6 min 22 PCS. 0/1 2 Temperature Cycle 300 Cycles 22 PCS. 0/1 3 Thermal Shock 300 Cycles 22 PCS. 0/1 4 High Temperature Storage Low Temperature Storage 1000 Hrs. 22 PCS. 0/1 5 Temp. : -40℃ 1000 Hrs. 22 PCS. 0/1 6 DC Operating Life IF = 20 mA 1000 Hrs. 22 PCS. 0/1 7 High Temperature / High Humidity 85℃/ 85%RH 1000 Hrs. 22 PCS. 0/1 Everlight Electronics Co., Ltd. Device No. : http://www.everlight.com Date:18-Jan-2006 Rev. 1 Page: 8 of 10 Prepared by:Rita Shen EVERLIGHT ELECTRONICS CO.,LTD. 57-21SURC/S530-XX/TR8 Precautions For Use 1. Over-current-proof Customer must apply resistors for protection, otherwise slight voltage shift will cause big current change ( Burn out will happen ). 2. Storage 2.1 Do not open moisture proof bag before the products are ready to use. 2.2 Before opening the package: The LEDs should be kept at 30℃ or less and 90%RH or less. 2.3 After opening the package: The LED's floor life is 1 year under 30 deg C or less and 60% RH or less. If unused LEDs remain, it should be stored in moisture proof packages. 2.4 If the moisture absorbent material (silica gel) has faded away or the LEDs have exceeded the storage time, baking treatment should be performed using the following conditions. Baking treatment : 60±5℃ for 24 hours. 3. Soldering Condition 3.1 Pb-free solder temperature profile 3.2 Reflow soldering should not be done more than two times. 3.3 When soldering, do not put stress on the LEDs during heating. 3.4 After soldering, do not warp the circuit board. 4.Soldering Iron Each terminal is to go to the tip of soldering iron temperature less than 350℃ for 3 seconds within once in less than the soldering iron capacity 25W. Leave two seconds and more intervals, and do soldering of each terminal. Be careful because the damage of the product is often started at the time of the hand solder. Everlight Electronics Co., Ltd. Device No. : http://www.everlight.com Date:18-Jan-2006 Rev. 1 Page: 9 of 10 Prepared by:Rita Shen EVERLIGHT ELECTRONICS CO.,LTD. 57-21SURC/S530-XX/TR8 5.Repairing Repair should not be done after the LEDs have been soldered. When repairing is unavoidable, a double-head soldering iron should be used (as below figure). It should be confirmed beforehand whether the characteristics of the LEDs will or will not be damaged by repairing. EVERLIGHT ELECTRONICS CO., LTD. Office: No 25, Lane 76, Sec 3, Chung Yang Rd, Tucheng, Taipei 236, Taiwan, R.O.C Tel: 886-2-2267-2000, 2267-9936 Fax: 886-2267-6244, 2267-6189, 2267-6306 http://www.everlight.com Everlight Electronics Co., Ltd. Device No. : http://www.everlight.com Date:18-Jan-2006 Rev. 1 Page: 10 of 10 Prepared by:Rita Shen