64-135-REGHB7C-B01-2T

EVERLIGHT ELECTRONICS CO., LTD. DATA SHEET Part No. Date ： 64-135/REGHB7C-B01/ET ：2007.04.30 Department：RD3 Revision ：1.1 Received □ MASS PRODUCTION ■ PRELIMINARY □ CUSTOMER DESIGN PAGE :11 Revised record REV. 1.1 DESCRIPTION New Spec. RELEASE DATE 30.Apr.2007 OFFICE:.NO.25,LANE76,SEC.3,CHUNG YANG RD.,TUCHENG 236,TAIPEI,TAIWAN,R.O.C TEL FAX : 886-2-22672000 : 886-2-22676244 http://www.everlight.com EVERLIGHT ELECTRONICS CO., LTD. Technical Data Sheet (Preliminary) Luminosity Full Color LED 64-135/REGHB7C-B01/2T Features ․Super-luminosity chip LED. ․White SMT package. ․Built in Red, Green, and Blue chips. ․Lead frame package with individual 6 pins. ․Wide viewing angle. ․Soldering methods: IR reflow soldering. ․Pb-free. ․The product itself will remain within RoHS compliant version. Descriptions ․Due to the package design, 64-135 has wide viewing angle , low power consumption and adjusting each color is possible thanks to serial connection by 6 terminal connection (Individual driving by each terminal) in case of using several number of LED. And makes it ideal for light pipe application. Applications ․Amusement equipment. ․Information boards. ․Flashlight for digital camera of cellular phone. ․Telecommunication: indicator and backlighting in telephone and fax. ․Flat backlight for LCD’s, switches and symbols. ․Light pipe application. ․General use. Device Selection Guide Chip Type RE GH B7 Material AlGaInP InGaN InGaN Emitted Color Brilliant Red Brilliant Green Blue Water Clear Resin Color Everlight Electronics Co., Ltd. Device No. : http://www.everlight.com prepared date: 30-Apr-2007 Rev. 1.1 Page: 1 of 14 prepared by: Josh Chou EVERLIGHT ELECTRONICS CO., LTD. 64-135/REGHB7C-B01/2T Package Outline Dimensions GB RE B7 32 1 3 2 1 4 45 6 5 6 Note: The tolerances unless mentioned is ±0.1mm;Unit = mm Everlight Electronics Co., Ltd. Device No. : http://www.everlight.com prepared date: 30-Apr-2007 Rev. 1.1 Page: 2 of 14 prepared by: Josh Chou EVERLIGHT ELECTRONICS CO., LTD. 64-135/REGHB7C-B01/2T Absolute Maximum Ratings (Ta=25℃) Parameter Reverse Voltage Symbol VR RE Forward Current IF GH B7 RE Peak Forward Current(Duty 1/10 @ 1KHz) IFP GH B7 RE Power Dissipation Pd GH B7 RE Electrostatic Discharge(HBM) ESD GH B7 Operating Temperature Storage Temperature Soldering Temperature Topr Tstg Tsol Rating 5 50 30 30 100 100 100 120 110 110 2000 2000 2000 -40 ~ +85 -40~ +90 ℃ ℃ V mW mA mA Unit V Reflow Soldering : 260 ℃ for 10 sec. Hand Soldering : 350 ℃ for 3 sec. Everlight Electronics Co., Ltd. Device No. : http://www.everlight.com prepared date: 30-Apr-2007 Rev. 1.1 Page: 3 of 14 prepared by: Josh Chou EVERLIGHT ELECTRONICS CO., LTD. 64-135/REGHB7C-B01/2T Electro-Optical Characteristics (Ta=25℃) Parameter Symbol RE Luminous Intensity Viewing Angle Peak Wavelength IV GH B7 2θ1/2 RE λp GH B7 RE Dominant Wavelength λd GH B7 Spectrum Radiation Bandwidth RE △λ GH B7 RE Forward Voltage Reverse Current VF IR GH B7 RE Min. 360 565 140 ----------------617.5 523.5 452.5 ------------1.75 2.75 2.75 ----Typ. ------------120 632 518 468 ------------20 35 35 ----------------Max. 715 1120 360 ----------------629.5 531.5 467.5 ------------2.35 3.95 3.95 10 μA VR=5V V IF=20mA nm IF=20mA nm IF=20mA nm IF=20mA deg IF=20mA mcd IF=20mA Unit Condition Notes: 1. Tolerance of Luminous Intensity: ±11% 2. Tolerance of Dominant Wavelength: ±1 nm 3. Tolerance of Forward Voltage: ±0.1V Everlight Electronics Co., Ltd. Device No. : http://www.everlight.com prepared date: 30-Apr-2007 Rev. 1.1 Page: 4 of 14 prepared by: Josh Chou EVERLIGHT ELECTRONICS CO., LTD. 64-135/REGHB7C-B01/2T Bin Range of Luminous Intensity Symbol RE Bin Code T2 U1 U2 U2 GH IV V1 V2 R2 B7 S1 S2 T1 Min. 360 450 565 565 715 900 140 180 225 285 Min. 617.5 621.5 625.5 523.5 525.5 527.5 529.5 452.5 455.5 458.5 461.5 464.5 Max. 450 565 715 715 900 1120 180 225 285 360 Max. 621.5 625.5 629.5 525.5 527.5 529.5 531.5 455.5 458.5 461.5 464.5 467.5 nm IF =20mA Unit Condition mcd IF =20mA Unit Condition Bin Range of Dominant Wavelength Symbol RE Bin Code E4 E5 E6 B13 GH λd B14 B15 B16 A5 A6 B7 A7 A8 A9 Notes: 1. Tolerance of Luminous Intensity: ±11% 2. Tolerance of Dominant Wavelength: ±1 nm 3. Tolerance of Forward Voltage: ±0.1V Everlight Electronics Co., Ltd. Device No. : http://www.everlight.com prepared date: 30-Apr-2007 Rev. 1.1 Page: 5 of 14 prepared by: Josh Chou EVERLIGHT ELECTRONICS CO., LTD. 64-135/REGHB7C-B01/2T Bin Range of Forward Voltage Symbol RE VF GH B7 Bin Code R1 G1 B1 Min. 1.75 2.75 2.75 Max. 2.35 3.95 3.95 V IF =20mA Unit Condition Notes: 1. Tolerance of Luminous Intensity: ±11% 2. Tolerance of Dominant Wavelength: ±1 nm 3. Tolerance of Forward Voltage: ±0.1V Everlight Electronics Co., Ltd. Device No. : http://www.everlight.com prepared date: 30-Apr-2007 Rev. 1.1 Page: 6 of 14 prepared by: Josh Chou EVERLIGHT ELECTRONICS CO., LTD. 64-135/REGHB7C-B01/2T Typical Electro-Optical Characteristics Curves (RE) Everlight Electronics Co., Ltd. Device No. : http://www.everlight.com prepared date: 30-Apr-2007 Rev. 1.1 Page: 7 of 14 prepared by: Josh Chou EVERLIGHT ELECTRONICS CO., LTD. 64-135/REGHB7C-B01/2T Typical Electro-Optical Characteristics Curves (GH) Spectrum Distribution Relative luminous intensity (%) IF(mA) 100 75 50 25 0 400 Ta=25° 50 40 30 25 20 10 0 2.6 3.0 3.4 3.8 4.2 4.5 Forward Current vs. Forward Voltage Ta=25° 450 500 550 Wavelength λ p(nm) 600 Forward Current Forward Voltage(VF )-volts Luminous Intensity vs Forward Current Ta=25° Relative luminous intensity (%) 1000 Relative luminous intensity (%) 1000 L uminous Intensity vs. Ambient Temperature 100 100 10 10 1 -60 -40 -20 0 20 40 60 80 100 10 10 10 1 10 2 Ambient Temperature Ta(°C) Forward Current IF(mA) Radiation Diagram 0° IF(mA) 50 40 30 20 10 0 0 20 40 60 85 100 10° 20° Ta=25° 30° Forward Current 1.0 0.9 0.8 0.7 0.5 0.3 0.1 0.2 0.4 0.6 40° 50° 60° 70° 80° 90° Ambient Temperature Ta(°C) Everlight Electronics Co., Ltd. Device No. : http://www.everlight.com prepared date: 30-Apr-2007 Rev. 1.1 Page: 8 of 14 prepared by: Josh Chou EVERLIGHT ELECTRONICS CO., LTD. 64-135/REGHB7C-B01/2T Typical Electro-Optical Characteristics Curves (B7) Everlight Electronics Co., Ltd. Device No. : http://www.everlight.com prepared date: 30-Apr-2007 Rev. 1.1 Page: 9 of 14 prepared by: Josh Chou EVERLIGHT ELECTRONICS CO., LTD. 64-135/REGHB7C-B01/2T Label explanation CAT: Luminous Intensity Rank HUE: Dom. Wavelength Rank REF: Forward Voltage Rank Reel Dimensions Note: The tolerances unless mentioned is ±0.1mm ,Unit = mm Everlight Electronics Co., Ltd. Device No. : http://www.everlight.com prepared date: 30-Apr-2007 Rev. 1.1 Page: 10 of 14 prepared by: Josh Chou EVERLIGHT ELECTRONICS CO., LTD. 64-135/REGHB7C-B01/2T Carrier Tape Dimensions: Loaded quantity 2000 PCS per reel. Moisture Resistant Packaging Label Everlight Electronics Co., Ltd. Device No. : + + + Aluminum moisture-proof bag Desiccant Label http://www.everlight.com prepared date: 30-Apr-2007 Rev. 1.1 Page: 11 of 14 prepared by: Josh Chou EVERLIGHT ELECTRONICS CO., LTD. 64-135/REGHB7C-B01/2T Reliability Test Items and Conditions The reliability of products shall be satisfied with items listed below. Confidence level：90% LTPD：10% Test Hours/Cycles 6 Min. No. 1 Items Reflow Soldering Test Condition Temp. : 260℃±5℃ Min. 5sec. H : +100℃ 15min ∫ 5 min L : -40℃ 15min H : +100℃ 5min ∫ 10 sec L : -10℃ 5min Temp. : 100℃ Temp. : -40℃ IF = 20 mA 85℃/ 85%RH Sample Size Ac/Re 22 PCS. 0/1 2 Temperature Cycle 300 Cycles 22 PCS. 0/1 3 4 5 6 7 Thermal Shock High Temperature Storage Low Temperature Storage DC Operating Life High Temperature / High Humidity 300 Cycles 22 PCS. 22 PCS. 22 PCS. 22 PCS. 22 PCS. 0/1 0/1 0/1 0/1 0/1 1000 Hrs. 1000 Hrs. 1000 Hrs. 1000 Hrs. * For each die Everlight Electronics Co., Ltd. Device No. : http://www.everlight.com prepared date: 30-Apr-2007 Rev. 1.1 Page: 12 of 14 prepared by: Josh Chou EVERLIGHT ELECTRONICS CO., LTD. 64-135/REGHB7C-B01/2T Precautions for Use 1. Over-current-proof Customer must apply resistors for protection, otherwise slight voltage shift will cause big current change ( Burn out will happen ). 2. Storage 2.1 Do not open moisture proof bag before the products are ready to use. 2.2 Before opening the package: The LEDs should be kept at 30℃ or less and 90%RH or less. 2.3 After opening the package: The LED's floor life is 1 year under 30 deg C or less and 60% RH or less. If unused LEDs remain, it should be stored in moisture proof packages. 2.4 If the moisture absorbent material (silica gel) has faded away or the LEDs have exceeded the storage time, baking treatment should be performed using the following conditions. Baking treatment : 60±5℃ for 24 hours. 3. Soldering Condition 3.1 Pb-free solder temperature profile 1~5 °C / Sec. 260°C. Max. 10 Sec. Max. 1~5 °C / Sec. Pre-heating 180~200°C 60 Sec. Max. Above 220°C 120 Sec. Max. 3.2 Reflow soldering should not be done more than two times. 3.3 When soldering, do not put stress on the LEDs during heating. 3.4 After soldering, do not warp the circuit board. 4. Soldering Iron Each terminal is to go to the tip of soldering iron temperature less than 350℃ for 3 seconds within once in less than the soldering iron capacity 25W. Leave two seconds and more intervals, and do soldering of each terminal. Be careful because the damage of the product is often started at the time of the hand solder. Everlight Electronics Co., Ltd. Device No. : http://www.everlight.com prepared date: 30-Apr-2007 Rev. 1.1 Page: 13 of 14 prepared by: Josh Chou EVERLIGHT ELECTRONICS CO., LTD. 64-135/REGHB7C-B01/2T 5. Repairing Repair should not be done after the LEDs have been soldered. When repairing is unavoidable, a double-head soldering iron should be used (as below figure). It should be confirmed beforehand whether the characteristics of the LEDs will or will not be damaged by repairing. EVERLIGHT ELECTRONICS CO., LTD. Office: No 25, Lane 76, Sec 3, Chung Yang Rd, Tucheng, Taipei 236, Taiwan, R.O.C Tel: 886-2-2267-2000, 2267-9936 Fax: 886-2267-6244, 2267-6189, 2267-6306 http://www.everlight.com Everlight Electronics Co., Ltd. Device No. : http://www.everlight.com prepared date: 30-Apr-2007 Rev. 1.1 Page: 14 of 14 prepared by: Josh Chou