65-21/BHC-AP2R1EZ/3AA

Technical Data Sheet Mini Top View LEDs (Reverse Gull Wing) 65-21/BHC-AP2R1EZ/3AA Features ․White SMT package. ․Optical indicator. ․Wide viewing angle. ․Soldering methods: IR reflow soldering. ․Available on tape and reel. ․Pb-free ․The product itself will remain within RoHS compliant version. Descriptions ․The 65-21 series is available in soft orange, green, blue, and yellow. Due to the package design, the LED has wide viewing angle and optimized light coupling by inter reflector. Besides, LED is mounted top down and emits through the PCB. This feature makes the SMT TOP LED ideal for light pipe application. Applications ․Optical indicators. ․Coupling into light guides. ․Backlighting (LCD, cellular phones, switches, keys, displays, illuminated advertising, general lighting). ․Coupling into light guides; Interior automotive lighting (e.g. dashboard backlighting, etc.). Device Selection Guide Chip Emitted Color Resin Color Blue Water Clear Material InGaN Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 1 Page: 1 of 10 Device No.: DSE-0006289 Prepared date: 22-Dec-2011 Prepared by:Ivy Chen Technical Data Sheet Mini Top View LEDs (Reverse Gull Wing) 65-21/BHC-AP2R1EZ/3AA Package Outline Dimensions Recommended solding pad design Notes: The tolerances unless mentioned is ±0.1mm ,Unit = mm Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 1 Page: 2 of 10 Device No.: DSE-0006289 Prepared date: 22-Dec-2011 Prepared by:Ivy Chen Technical Data Sheet Mini Top View LEDs (Reverse Gull Wing) 65-21/BHC-AP2R1EZ/3AA Absolute Maximum Ratings (Ta=25℃) Parameter Symbol Rating Unit Reverse Voltage VR 5 V Forward Current IF 25 mA Peak Forward Current (Duty 1/10 @1KHz) IFP 100 mA Power Dissipation Pd 95 mW Electrostatic Discharge(HBM) ESD 2000 V Operating Temperature Topr -40 ~ +85 ℃ Storage Temperature Tstg -40 ~ +90 ℃ Soldering Temperature Tsol Reflow Soldering : 260 ℃ for 10 sec. Hand Soldering : 350 ℃ for 3 sec. Electro-Optical Characteristics (Ta=25℃) Parameter Symbol Min. Typ. Max. Unit Condition Luminous Intensity Iv 57.0 ----- 140 mcd IF =10mA Viewing Angle 2θ1/2 ----- 120 ----- deg IF =10mA Peak Wavelength λp ----- 468 ----- nm IF =10mA Dominant Wavelength λd 464.5 ----- 476.5 nm IF =10mA Spectrum Radiation Bandwidth Δλ ----- 25 ----- nm IF =10mA Forward Voltage VF 2.75 ----- 3.65 V IF =10mA Reverse Current IR ----- ----- 10 μA VR=5V Notes: 1.Tolerance of Luminous Intensity: ±11% 2.Tolerance of dominant wavelength: ±1nm. 3.Tolerance of Forward Voltage: ±0.05V Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 1 Page: 3 of 10 Device No.: DSE-0006289 Prepared date: 22-Dec-2011 Prepared by:Ivy Chen Technical Data Sheet Mini Top View LEDs (Reverse Gull Wing) 65-21/BHC-AP2R1EZ/3AA Bin Range of Luminous Intensity Bin Min Max P2 57.0 72.0 Q1 72.0 90.0 Q2 90.0 112.0 R1 112.0 140.0 Unit Condition mcd IF=10mA Unit Condition nm IF=10mA Unit Condition V IF=10mA Bin Range of Dom. Wavelength Group A Bin Min Max A9 464.5 467.5 A10 467.5 470.5 A11 470.5 473.5 A12 473.5 476.5 Bin Min Max 5 2.75 3.05 6 3.05 3.35 7 3.35 3.65 Bin Range of Forward Voltage Group E Notes: 1.Tolerance of Luminous Intensity: ±11% 2.Tolerance of dominant wavelength: ±1nm. 3.Tolerance of Forward Voltage: ±0.05V Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 1 Page: 4 of 10 Device No.: DSE-0006289 Prepared date: 22-Dec-2011 Prepared by:Ivy Chen Technical Data Sheet Mini Top View LEDs (Reverse Gull Wing) 65-21/BHC-AP2R1EZ/3AA Typical Electro-Optical Characteristics Curves Spectrum Distribution 50 I (mA) 100 40 F 75 30 Forward Current Relative luminous intensity (%) Ta=25° Forward Current vs. Forward Voltage Ta=25°C 50 25 0 400 450 500 550 25 20 10 0 2.6 600 Relative luminous intensity (%) Relative luminous intensity (%) Ambient Temperature 100 10 1000 4.5 10 1 10 0 20 40 60 80 100 10 10 Forward Current IF(mA) Radiation Diagram Forward Current Derating Curve 0° 50 IF(mA) 4.2 100 Ambient Temperature Ta (°C) Forward Current 3.8 Luminous Intensity vs Forward Current Ta=25°C Luminous Intensity vs. 1 -60 -40 -20 3.4 Forward Voltage VF (V) Wavelength λ (nm) 1000 3.0 Ta=25°C 10° 20° 30° 40 30 25 0.9 20 50° 0.8 10 0 40° 1.0 60° 70° 0.7 0 20 40 60 85 100 Ambient Temperature Ta (°C) 80° 90° 0.5 0.3 0.1 0.2 0.4 0.6 Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 1 Page: 5 of 10 Device No.: DSE-0006289 Prepared date: 22-Dec-2011 Prepared by:Ivy Chen Technical Data Sheet Mini Top View LEDs (Reverse Gull Wing) 65-21/BHC-AP2R1EZ/3AA Label Explanation CAT: Luminous Intensity Rank HUE: Dom. Wavelength Rank REF: Forward Voltage Rank Pb EVERLIGHT CPN : P N : XXXXXXXXXXXXX RoHS XXXXXXXXXXXXX CAT : XXX HUE : XXX REF : XXX Q TY : XXX LO T NO : XXXXXXXXXX Reference : XXXXXXXX MADE IN TAIWAN Reel Dimensions Note: The tolerances unless mentioned is ±0.1mm , Unit = mm Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 1 Page: 6 of 10 Device No.: DSE-0006289 Prepared date: 22-Dec-2011 Prepared by:Ivy Chen Technical Data Sheet Mini Top View LEDs (Reverse Gull Wing) 65-21/BHC-AP2R1EZ/3AA Carrier Tape Dimensions: Loaded Quantity 2000 pcs Per Reel. Note: 1.The tolerances unless mentioned is ±0.1mm ,Unit = mm 2.Minimum packing amount is 250/500/1000/2000 pcs per reel Moisture Resistant Packaging Label Aluminum moisture-proof bag Desiccant Label Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 1 Page: 7 of 10 Device No.: DSE-0006289 Prepared date: 22-Dec-2011 Prepared by:Ivy Chen Technical Data Sheet Mini Top View LEDs (Reverse Gull Wing) 65-21/BHC-AP2R1EZ/3AA Reliability Test Items and Conditions The reliability of products shall be satisfied with items listed below. Confidence level：90% LTPD：10% No. Items Test Condition Test Hours/Cycles Sample Size Ac/Re 1 Reflow Soldering Temp. : 260℃±5℃ Min. 10sec. 6 Min. 22 PCS. 0/1 22 PCS. 0/1 22 PCS. 0/1 H : +100℃ 15min ∫ 5 min L : -40℃ 15min H : +100℃ 5min ∫ 10 sec L : -10℃ 5min 2 Temperature Cycle 3 Thermal Shock 4 High Temperature Storage Temp. : 100℃ 1000 Hrs. 22 PCS. 0/1 5 Low Temperature Storage Temp. : -40℃ 1000 Hrs. 22 PCS. 0/1 6 DC Operating Life IF = 20 mA/25℃ 1000 Hrs. 22 PCS. 0/1 7 High Temperature / High Humidity 85℃/ 85%RH 1000 Hrs. 22 PCS. 0/1 300 Cycles 300 Cycles Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 1 Page: 8 of 10 Device No.: DSE-0006289 Prepared date: 22-Dec-2011 Prepared by:Ivy Chen Technical Data Sheet Mini Top View LEDs (Reverse Gull Wing) 65-21/BHC-AP2R1EZ/3AA Precautions for Use 1.Over-current-proof Customer must apply resistors for protection, otherwise slight voltage shift will cause big current change ( Burn out will happen ). 2. Storage 2.1 Do not open moisture proof bag before the products are ready to use. 2.2 Before opening the package: The LEDs should be kept at 30℃ or less and 90%RH or less. 2.3 After opening the package: The LED2s floor life is 1 year under 30℃ or less and 60% RH or less. If unused LEDs remain, it should be stored in moisture proof packages. 2.4 If the moisture absorbent material (silica gel) has faded away or the LEDs have exceeded the storage time, baking treatment should be performed using the following conditions. Baking treatment : 60±5℃ for 24 hours. 3. Soldering Condition 3.1 Pb-free solder temperature profile 260°C Max. 10sec. Max. Above255°C 30sec.Max. 3°C/sec.Max. 6°C/sec.Max. Pre-heating Above 217°C 60~150sec. 150~200°C 60~120sec. 3.2 Reflow soldering should not be done more than two times. 3.3 When soldering, do not put stress on the LEDs during heating. 3.4 After soldering, do not warp the circuit board. Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 1 Page: 9 of 10 Device No.: DSE-0006289 Prepared date: 22-Dec-2011 Prepared by:Ivy Chen Technical Data Sheet Mini Top View LEDs (Reverse Gull Wing) 65-21/BHC-AP2R1EZ/3AA 4. Soldering Iron Each terminal is to go to the tip of soldering iron temperature less than 350℃ for 3 seconds within once in less than the soldering iron capacity 25W. Leave two seconds and more intervals, and do soldering of each terminal. Be careful because the damage of the product is often started at the time of the hand solder. 5. Repairing Repair should not be done after the LEDs have been soldered. When repairing is unavoidable, a double-head soldering iron should be used (as below figure). It should be confirmed beforehand whether the characteristics of the LEDs will or will not be damaged by repairing. Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 1 Page: 10 of 10 Device No.: DSE-0006289 Prepared date: 22-Dec-2011 Prepared by:Ivy Chen