65-21/GHC-YS2U1G/2AA

Technical Data Sheet Mini Top LEDs (Reverse Gull Wing) 65-21/GHC-YS2U1G/2AA Features ․White SMT package. ․Optical indicator. ․Wide viewing angle. ․Soldering methods: IR reflow soldering ․Available on tape and reel ․Pb-free ․The product itself will remain within RoHS compliant version. Descriptions The 65-21 series is available in soft orange, green, blue, and yellow. Due to the package design, the LED has wide viewing angle and optimized light coupling by inter reflector. Besides, LED is mounted top down and emits through the PCB. This feature makes the ideal for light pipe application. Applications ․Optical indicators. ․Coupling into light guides. ․Backlighting (LCD, cellular phones, switches, keys, displays, illuminated advertising, general lighting). ․Coupling into light guides; Interior automotive lighting (e.g. dashboard backlighting, etc.). Device Selection Guide Chip Emitted Color Resin Color Brilliant Green Water Clear Material AlGaInP Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 1 Page: 1 of 10 Device No.: DSE-0000651 Prepared date: 31-Dec-2008 Prepared by: Josh Chou Technical Data Sheet Mini Top LEDs (Reverse Gull Wing) 65-21/GHC-YS2U1G/2AA Package Outline Dimensions Note: Tolerance unless mentioned is ±0.1mm; Unit = mm Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 1 Page: 2 of 10 Device No.: DSE-0000651 Prepared date: 31-Dec-2008 Prepared by: Josh Chou Technical Data Sheet Mini Top LEDs (Reverse Gull Wing) 65-21/GHC-YS2U1G/2AA Absolute Maximum Ratings (Ta=25℃) Parameter Symbol Rating Unit Reverse Voltage VR 5 V Forward Current IF 25 mA Power Dissipation Pd 100 mW Peak Forward Current (Duty 1/10 @1KHz) IFP 95 mA Electrostatic Discharge (HBM) ESD 150 V Operating Temperature Topr -40 ~ +85 ℃ Storage Temperature Tstg -40 ~ +90 ℃ Soldering Temperature Tsol Reflow Soldering : 260 ℃ for 10 sec. Hand Soldering : 350 ℃ for 3 sec. Electro-Optical Characteristics (Ta=25℃) Parameter Symbol Min. Typ. Max. Unit Condition Luminous Intensity Iv 225 ----- 565 mcd IF=20mA Viewing Angle 2θ1/2 ----- 120 ----- deg IF=20mA Peak Wavelength λp ----- 518 ----- nm IF=20mA Dominant Wavelength λd 520 ----- 535 nm IF=20mA Spectrum Radiation Bandwidth Δλ ----- 35 ----- nm IF=20mA Forward Voltage VF 2.70 ----- 3.70 V IF=20mA Reverse Current IR ----- ----- 10 μA VR=5V Notes: 1. Tolerance of Luminous Intensity: ±11% 2. Tolerance of Dominant Wavelength: ±1nm 3. Tolerance of Forward Voltage: ±0.1V Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 1 Page: 3 of 10 Device No.: DSE-0000651 Prepared date: 31-Dec-2008 Prepared by: Josh Chou Technical Data Sheet Mini Top LEDs (Reverse Gull Wing) 65-21/GHC-YS2U1G/2AA Bin Range of Dominant Wavelength Group Bin Min Max X 520 525 Y 525 530 Z 530 535 Y Unit Condition nm IF=20mA Unit Condition mcd IF=20mA Unit Condition V IF=20mA Bin Range of Luminous Intensity Bin Min Max S2 225 285 T1 285 360 T2 360 450 U1 450 565 Bin Min Max 34 2.70 2.80 35 2.80 2.90 36 2.90 3.00 37 3.00 3.10 38 3.10 3.20 39 3.20 3.30 40 3.30 3.40 41 3.40 3.50 42 3.50 3.60 43 3.60 3.70 Bin Range of Forward Voltage Group G Notes: 1. Tolerance of Luminous Intensity: ±11% 2. Tolerance of Dominant Wavelength: ±1nm 3. Tolerance of Forward Voltage: ±0.1V Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 1 Page: 4 of 10 Device No.: DSE-0000651 Prepared date: 31-Dec-2008 Prepared by: Josh Chou Technical Data Sheet Mini Top LEDs (Reverse Gull Wing) 65-21/GHC-YS2U1G/2AA Typical Electro-Optical Characteristics Curves Forward Current vs. Forward Voltage Ta=25°C 100 75 50 25 0 450 500 550 600 Wavelength λ (nm) Ta=25°C 50 Forward Current IF (mA) Relative luminous intensity (% ) Spectrum Distribution 40 30 20 10 0 2.2 650 Ambient Temperature 1000 Relative luminous intensity (% ) Relative luminous intensity (% ) Relative Luminous Intensity vs. 100 10 1 -60 -40 -20 4.2 Relative Luminous Intensity vs. Ta=25°C Forward Current 1000 f=1KHz Duty=1/10 100 10 1 0 20 40 60 80 100 0 2 1 10 10 10 Forward Current IF (mA) Ambient Temperature Ta (°C) Radiation Diagram Forward Current Derating Curve Forward Current IF (mA) 2.6 3.0 3.4 3.8 Forward Voltage VF (V) 0° 10° 20° Ta=25°C 30° 50 40 20 10 0 40° 1.0 30 0.9 50° 0.8 60° 70° 0.7 0 20 40 60 85 100 Ambient Temperature Ta (°C) 80° 90° 0.5 0.3 0.1 0.2 0.4 0.6 Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 1 Page: 5 of 10 Device No.: DSE-0000651 Prepared date: 31-Dec-2008 Prepared by: Josh Chou Technical Data Sheet Mini Top LEDs (Reverse Gull Wing) 65-21/GHC-YS2U1G/2AA Label Explanation CAT: Luminous Intensity Rank Pb HUE: Dom. Wavelength Rank EVERLIGHT CPN : P N : XXXXXXXXXXXXX RoHS REF: Forward Voltage Rank XXXXXXXXXXXXX CAT : XXX HUE : XXX REF : XXX QTY : XXX LOT NO : XXXXXXXXXX Reference : XXXXXXXX MADE IN TAIWAN Reel Dimensions Note: Tolerance unless mentioned is ±0.1mm; Unit = mm Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 1 Page: 6 of 10 Device No.: DSE-0000651 Prepared date: 31-Dec-2008 Prepared by: Josh Chou Technical Data Sheet Mini Top LEDs (Reverse Gull Wing) 65-21/GHC-YS2U1G/2AA Carrier Tape Dimensions: Loaded Quantity 2000 pcs Per Reel. Note: Tolerance unless mentioned is ±0.1mm; Unit = mm Moisture Resistant Packaging Label Aluminum moisture-proof bag Desiccant Label Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 1 Page: 7 of 10 Device No.: DSE-0000651 Prepared date: 31-Dec-2008 Prepared by: Josh Chou Technical Data Sheet Mini Top LEDs (Reverse Gull Wing) 65-21/GHC-YS2U1G/2AA Reliability Test Items and Conditions The reliability of products shall be satisfied with items listed below. Confidence level：90% LTPD：10% No. Items 1 Reflow Soldering Test Condition Test Hours/Cycles Sample Size Ac/Re Temp. : 260℃±5℃ 6 min 22 PCS. 0/1 300 Cycles 22 PCS. 0/1 Min. 5sec. H : +100℃ 15min 2 Temperature Cycle ∫ 5 min L : -40℃ 15min H : +100℃ 5min 3 Thermal Shock ∫ 10 sec L : -10℃ 5min 300 Cycles 22 PCS. 0/1 4 High Temperature Storage Temp. : 100℃ 1000 Hrs. 22 PCS. 0/1 5 Low Temperature Storage Temp. : -40℃ 1000 Hrs. 22 PCS. 0/1 6 DC Operating Life IF = 20 mA 1000 Hrs. 22 PCS. 0/1 7 High Temperature / High Humidity 85℃/ 85%RH 1000 Hrs. 22 PCS. 0/1 Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 1 Page: 8 of 10 Device No.: DSE-0000651 Prepared date: 31-Dec-2008 Prepared by: Josh Chou Technical Data Sheet Mini Top LEDs (Reverse Gull Wing) 65-21/GHC-YS2U1G/2AA Precautions for Use 1. Over-current-proof Customer must apply resistors for protection; otherwise slight voltage shift will cause big current change (Burn out will happen). 2. Storage 2.1 Do not open moisture proof bag before the products are ready to use. 2.2 Before opening the package: The LEDs should be kept at 30℃ or less and 90%RH or less. 2.3 After opening the package: The LED's floor life is 1 year under 30℃ or less and 60% RH or less. If unused LEDs remain, it should be stored in moisture proof packages. 2.4 If the moisture absorbent material (silica gel) has faded away or the LEDs have exceeded the storage time, baking treatment should be performed using the following conditions. Baking treatment: 60±5℃ for 24 hours. 3. Soldering Condition 3.1 Pb-free solder temperature profile 1~5 °C / Sec. 260°C. Max. 10 Sec. Max. 1~5 °C / Sec. Pre-heating 180~200°C 60 Sec. Max. Above 220°C 120 Sec. Max. 3.2 Reflow soldering should not be done more than two times. 3.3 When soldering, do not put stress on the LEDs during heating. 3.4 After soldering, do not warp the circuit board. Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 1 Page: 9 of 10 Device No.: DSE-0000651 Prepared date: 31-Dec-2008 Prepared by: Josh Chou Technical Data Sheet Mini Top LEDs (Reverse Gull Wing) 65-21/GHC-YS2U1G/2AA 4. Soldering Iron Each terminal is to go to the tip of soldering iron temperature less than 280℃ for 3 seconds within once in less than the soldering iron capacity 25W. Leave two seconds and more intervals, and do soldering of each terminal. Be careful because the damage of the product is often started at the time of the hand solder. 5. Repairing Repair should not be done after the LEDs have been soldered. When repairing is unavoidable, a double-head soldering iron should be used (as below figure). It should be confirmed beforehand whether the characteristics of the LEDs will or will not be damaged by repairing. EVERLIGHT ELECTRONICS CO., LTD. Office: No 25, Lane 76, Sec 3, Chung Yang Rd, Tucheng, Taipei 236, Taiwan, R.O.C Tel: 886-2-2267-2000, 2267-9936 Fax: 886-2267-6244, 2267-6189, 2267-6306 http://www.everlight.com Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 1 Page: 10 of 10 Device No.: DSE-0000651 Prepared date: 31-Dec-2008 Prepared by: Josh Chou