65-21/Y2C-AR1S2B/3T

EVERLIGHT ELECTRONICS CO.,LTD. Technical Data Sheet Mini TOP View LED 65-21/Y2C-AR1S2B/3T Features ․White SMT package. ․Optical indicator. ․Wide viewing angle. ․Soldering methods: reflow soldering ․Available on tape and reel ․Pb-free ․The product itself will remain within RoHS compliant version. Descriptions ․The 65-21 series is available in soft orange, green, blue, and yellow. Due to the package design, the LED has wide viewing angle and optimized light coupling by inter reflector. This feature makes the ideal for light pipe application. Applications ․Optical indicators. ․Coupling into light guides. ․Backlighting (LCD, cellular phones, switches, keys, displays, illuminated advertising, general lighting). ․Coupling into light guides; Interior automotive lighting (e.g. dashboard backlighting, etc.). Device Selection Guide Chip Lens Color Material Emitted Color AlGaInP Brilliant Yellow Everlight Electronics Co., Ltd. Device No. : Water Clear http://www.everlight.com prepared date: 24-Jul-2006 Rev. 2 Page: 1 of 10 Prepared by: Tim Chao EVERLIGHT ELECTRONICS CO.,LTD. 65-21/Y2C-AR1S2B/3T Package Outline Dimensions Notes: All dimensions are in millimeters. Tolerances unspecified are ±0.1mm. Everlight Electronics Co., Ltd. Device No. : http://www.everlight.com prepared date: 24-Jul-2006 Rev. 2 Page: 2 of 10 Prepared by: Tim Chao EVERLIGHT ELECTRONICS CO.,LTD. 65-21/Y2C-AR1S2B/3T Absolute Maximum Ratings (Ta=25℃) Parameter Symbol Rating Unit Reverse Voltage VR 5 V Forward Current IF 25 mA Power Dissipation Pd 60 mW Peak Forward Current (Duty 1/10 @1KHz) IFP 60 mA Electrostatic Discharge(HBM) ESD 2000 V Operating Temperature Topr -40 ~ +85 ℃ Storage Temperature Tstg -40~ +90 ℃ Soldering Temperature Tsol Reflow Soldering : 260 ℃ for 10 sec. Hand Soldering : 350 ℃ for 3 sec. Electro-Optical Characteristics (Ta=25℃) Parameter Symbol Min. Typ. Max. Unit Condition Luminous Intensity Iv 112 ----- 285 mcd IF=20mA Viewing Angle 2θ1/2 ----- 120 ----- deg IF=20mA Peak Wavelength λp ----- 591 ----- nm IF=20mA Dominant Wavelength λd 587 ----- 595 nm IF=20mA Spectrum Radiation Bandwidth Δλ ----- 15 ----- nm IF=20mA Forward Voltage VF 1.75 ----- 2.35 V IF=20mA Reverse Current IR ----- ----- 10 μA VR=5V Notes: 1.Tolerance of Luminous Intensity ±10% 2.Tolerance of Dominant Wavelength ±1nm 3.Tolerance of Forward Voltage ±0.1V Everlight Electronics Co., Ltd. Device No. : http://www.everlight.com prepared date: 24-Jul-2006 Rev. 2 Page: 3 of 10 Prepared by: Tim Chao EVERLIGHT ELECTRONICS CO.,LTD. 65-21/Y2C-AR1S2B/3T Bin Range Of Luminous intensity: Bin R1 R2 S1 S2 Minimum (mcd) 112 140 180 225 Maximum (mcd) 140 180 225 285 Condition IF=20mA Bin Range Of Dominate Wavelength: Group Minimum (nm) Maximum (nm) DD2 587 591 DD3 589 593 DD4 591 595 Condition IF=20mA Bin Rang Of Forward Voltage Bin Min Max 0 1.75 1.95 1 1.95 2.15 2 2.15 2.35 Unit Condition V IF=20mA Notes: 1.Tolerance of Luminous Intensity ±10% 2.Tolerance of Dominant Wavelength ±1nm 3.Tolerance of Forward Voltage ±0.1V Everlight Electronics Co., Ltd. Device No. : http://www.everlight.com prepared date: 24-Jul-2006 Rev. 2 Page: 4 of 10 Prepared by: Tim Chao EVERLIGHT ELECTRONICS CO.,LTD. 65-21/Y2C-AR1S2B/3T Typical Electro-Optical Characteristics Curves Everlight Electronics Co., Ltd. Device No. : http://www.everlight.com prepared date: 24-Jul-2006 Rev. 2 Page: 5 of 10 Prepared by: Tim Chao EVERLIGHT ELECTRONICS CO.,LTD. 65-21/Y2C-AR1S2B/3T Label explanation CAT: Luminous Intensity Rank HUE: Dom. Wavelength Rank REF: Forward Voltage Rank Reel Dimensions Note: The tolerances unless mentioned is ±0.1mm , Angle±0.5°,Unit = mm Everlight Electronics Co., Ltd. Device No. : http://www.everlight.com prepared date: 24-Jul-2006 Rev. 2 Page: 6 of 10 Prepared by: Tim Chao EVERLIGHT ELECTRONICS CO.,LTD. 65-21/Y2C-AR1S2B/3T Carrier Tape Dimensions: Loaded quantity 3000 PCS per reel. Note: The tolerances unless mentioned is ±0.1mm ,Unit = mm Moisture Resistant Packaging Label Aluminum moistue-proof bag Everlight Electronics Co., Ltd. Device No. : http://www.everlight.com prepared date: 24-Jul-2006 Desiccant Rev. 2 Label Page: 7 of 10 Prepared by: Tim Chao EVERLIGHT ELECTRONICS CO.,LTD. 65-21/Y2C-AR1S2B/3T Reliability Test Items And Conditions The reliability of products shall be satisfied with items listed below. Confidence level：90% LTPD：10% No. Items 1 Reflow Soldering 2 Temperature Cycle 3 Thermal Shock High Temperature Storage Low Temperature Storage 4 5 Test Condition Temp. : 260℃±5℃ Min. 5sec. H : +100℃ 15min ∫ 5 min L : -40℃ 15min Test Sample Ac/Re Hours/Cycles Size 22 PCS. 0/1 300 Cycles 22 PCS. 0/1 300 Cycles 22 PCS. 0/1 Temp. : 100℃ 1000 Hrs. 22 PCS. 0/1 Temp. : -40℃ 1000 Hrs. 22 PCS. 0/1 H : +100℃ 5min ∫ 10 sec L : -10℃ 5min 6 Min. 6 DC Operating Life IF = 20 mA 1000 Hrs. 22 PCS. 0/1 7 High Temperature / High Humidity 85℃/ 85%RH 1000 Hrs. 22 PCS. 0/1 Everlight Electronics Co., Ltd. Device No. : http://www.everlight.com prepared date: 24-Jul-2006 Rev. 2 Page: 8 of 10 Prepared by: Tim Chao EVERLIGHT ELECTRONICS CO.,LTD. 65-21/Y2C-AR1S2B/3T Precautions For Use 1. Over-current-proof Customer must apply resistors for protection , otherwise slight voltage shift will cause big current change ( Burn out will happen ). 2. Storage 2.1 Do not open moisture proof bag before the products are ready to use. 2.2 Before opening the package, the LEDs should be kept at 30℃ or less and 90%RH or less. 2.3 The LEDs should be used within a year. 2.4 After opening the package, the LEDs should be kept at 30℃ or less and 70%RH or less. 2.5 The LEDs should be used within 168 hours (7 days) after opening the package. 2.6 If the moisture absorbent material (silica gel) has faded away or the LEDs have exceeded the storage time, baking treatment should be performed using the following conditions. Baking treatment : 60±5℃ for 24 hours. 3. Soldering Condition 3.1 Pb-free solder temperature profile 3.2 Reflow soldering should not be done more than two times. 3.3 When soldering, do not put stress on the LEDs during heating. 3.4 After soldering, do not warp the circuit board. 4. Soldering Iron Each terminal is to go to the tip of soldering iron temperature less than 280℃ for 3 seconds within once in less than the soldering iron capacity 25W. Leave two seconds and more intervals, and do soldering of each terminal. Be careful because the damage of the product is often started at the time of the hand solder. Everlight Electronics Co., Ltd. Device No. : http://www.everlight.com prepared date: 24-Jul-2006 Rev. 2 Page: 9 of 10 Prepared by: Tim Chao EVERLIGHT ELECTRONICS CO.,LTD. 65-21/Y2C-AR1S2B/3T 5.Repairing Repair should not be done after the LEDs have been soldered. When repairing is unavoidable, a double-head soldering iron should be used (as below figure). It should be confirmed beforehand whether the characteristics of the LEDs will or will not be damaged by repairing. EVERLIGHT ELECTRONICS CO., LTD. Office: No 25, Lane 76, Sec 3, Chung Yang Rd, Tucheng, Taipei 236, Taiwan, R.O.C Everlight Electronics Co., Ltd. Device No. : Tel: 886-2-2267-2000, 2267-9936 Fax: 886-2267-6244, 2267-6189, 2267-6306 http://www.everlight.com http://www.everlight.com prepared date: 24-Jul-2006 Rev. 2 Page: 10 of 10 Prepared by: Tim Chao