67-03-RSGHBHC-B06-1T

Technical Data Sheet Full Color Top View LEDs 67-03/RSGHBHC-B06/1T Features ․P-LCC-4 package. ․White package and black surface. ․Colorless clear window. ․Ideal for backlight and light pipe application. ․Inter reflector. ․Wide viewing angle. ․ Suitable for vapor-phase reflow, Infrared reflow and wave solder processes. ․Computable with automatic placement equipment. ․Available on tape and reel (8mm Tape). ․Pb-free. ․The product itself will remain with RoHS compliant version Descriptions ․The 67-03 series is available in soft orange, green, blue and yellow. Due to the package design, the LED has wide viewing angle and optimized light coupling by inter reflector. This feature makes the LED ideal for light pipe application. The low current requirement makes this device ideal for portable equipment or any other application where power is at a premium. Applications ․Telecommunication: indicator and backlighting in telephone and fax. ․Flat backlight for LCD’s, switches and symbols. ․Light pipe application. ․General use. Device Selection Guide Chip Type RS GH BH Material AlGaInP InGaN InGaN Emitted Color Brilliant Red Brilliant Green Blue Water Clear Resin Color Everlight Electronics Co., Ltd. Device No.: DSE-0000581 http://www.everlight.com Prepared date: 11-Dec-2008 Rev. 1 Page: 1 of 13 Prepared by: Josh Chou Technical Data Sheet Full Color Top View LEDs 67-03/RSGHBHC-B06/1T Package Outline Dimensions C L 3 0.7±0.1 2.2±0.1 2.8±0.2 3 C L 4 1 3.2±0.2 0.5±0.1 3.5±0.2 2.4±0.1 2 2 4 1 2.8±0.2 0.15±0.05 0.8±0.1 1.9±0.2 2.7±0.2 For reflow soldering(propose) 0.8±0.1 1.8 1.6 1.8 Notes: 1.All dimensions are in millimeters 2.Tolerances unless dimension = ±0.1mm Everlight Electronics Co., Ltd. Device No.: DSE-0000581 http://www.everlight.com Prepared date: 11-Dec-2008 Rev. 1 Page: 2 of 13 0.7 Prepared by: Josh Chou 2.2 Technical Data Sheet Full Color Top View LEDs 67-03/RSGHBHC-B06/1T Absolute Maximum Ratings (Ta=25℃) Parameter Reverse Voltage Symbol VR RS Forward Current IF GH BH RS Peak Forward Current (Duty 1/10 @ 1KHz) IFP GH BH RS Power Dissipation Pd GH BH Total Power Dissipation Ptot RS Electrostatic Discharge(HBM) ESD GH BH Operating Temperature Storage Temperature Soldering Temperature Topr Tstg Tsol Rating 5 50 30 30 100 100 100 120 110 110 340 2000 1000 1000 -40 ~ +85 -40~ +90 ℃ ℃ V mw mw mA mA Unit V Reflow Soldering : 260 ℃ for 10 sec. Hand Soldering : 350 ℃ for 3 sec. Everlight Electronics Co., Ltd. Device No.: DSE-0000581 http://www.everlight.com Prepared date: 11-Dec-2008 Rev. 1 Page: 3 of 13 Prepared by: Josh Chou Technical Data Sheet Full Color Top View LEDs 67-03/RSGHBHC-B06/1T Electro-Optical Characteristics (Ta=25℃) Parameter Symbol RS Luminous Intensity Iv GH BH Viewing Angle 2θ1/2 RS Peak Wavelength λp GH BH RS Dominant Wavelength λd GH BH RS Spectrum Radiation Bandwidth △λ GH BH RS Forward Voltage Min. 450 900 225 ----------------617 520 465 ------------------------- Typ. ------------120 632 518 468 ------------20 35 35 2.0 3.5 3.5 Max. 715 1420 450 ----------------627 530 470 ------------2.4 4.0 4.0 Unit Condition mcd IF=20mA deg IF=20mA nm IF=20mA nm IF=20mA nm IF=20mA VF GH BH V IF=20mA Notes: 1. Tolerance of Luminous Intensity: ±11% 2. Tolerance of Dominant Wavelength: ±1 nm Everlight Electronics Co., Ltd. Device No.: DSE-0000581 http://www.everlight.com Prepared date: 11-Dec-2008 Rev. 1 Page: 4 of 13 Prepared by: Josh Chou Technical Data Sheet Full Color Top View LEDs 67-03/RSGHBHC-B06/1T Bin Range of Luminous Intensity Symbol RS Bin Code U1 U2 V2 W1 S2 BH T1 T2 Min. 450 565 900 1120 225 285 360 Max. 565 715 1120 1420 285 360 450 mcd IF=20mA Unit Condition IV GH Bin Range of Dominant Wavelength Symbol RS λd GH BH Bin Code 1 2 X Y X Min. 617 622 520 525 465 Max. 622 627 525 530 470 nm IF=20mA Unit Condition Notes: 1. Tolerance of Luminous Intensity: ±11% 2. Tolerance of Dominant Wavelength: ±1 nm Everlight Electronics Co., Ltd. Device No.: DSE-0000581 http://www.everlight.com Prepared date: 11-Dec-2008 Rev. 1 Page: 5 of 13 Prepared by: Josh Chou Technical Data Sheet Full Color Top View LEDs 67-03/RSGHBHC-B06/1T Typical Electro-Optical Characteristics Curves (RS) Spectrum Distribution Relative luminous intensity (%) 100 75 Ta=25°C Forward Current IF (mA) Forward Current vs. Forward Voltage 50 40 30 20 10 0 1.2 1.6 2.0 2.4 Ta=25°C 50 25 0 550 600 650 700 Wavelength λ (nm) 750 2.8 3.0 Forward Voltage VF (V) Relative Luminous Intensity vs. Forward Current Ta=25°C Relative luminous intensity (%) 1000 f=1KHz Duty=1/10 Relative Luminous Intensity vs. Ambient Temperature Relative luminous intensity (%) 1000 100 100 10 10 1 -60 -40 -20 0 20 40 60 80 100 10 10 Ambient Temperature Ta (°C) Forward Current Derating Curve 60 Forward Current IF (mA) 50 40 30 20 10 0 0 20 40 60 80 100 1.0 0.9 0.8 0.7 10 10 Forward Current I F (mA) Radiation Diagram 0° 10° 1 2 10 3 Ta=25°C 20° 30° 40° 50° 60° 70° 80° 90° 0.5 0.3 0.1 0.2 0.4 0.6 Ambient Temperature Ta (°C) Everlight Electronics Co., Ltd. Device No.: DSE-0000581 http://www.everlight.com Prepared date: 11-Dec-2008 Rev. 1 Page: 6 of 13 Prepared by: Josh Chou Technical Data Sheet Full Color Top View LEDs 67-03/RSGHBHC-B06/1T Typical Electro-Optical Characteristics Curves (GH) Spectrum Distribution Relative luminous intensity (%) IF (mA) 100 75 50 25 Ta=25°C 50 40 30 20 10 0 2.4 Forward Current vs. Forward Voltage Ta=25°C 0 400 450 500 550 Wavelength λ (nm) 600 Forward Current 2.6 2.8 3.2 3.6 4.0 Forward Voltage VF (V) Relative Luminous Intensity vs. Forward Current Ta=25°C Relative luminous intensity (%) 1000 f=1KHz Duty=1/10 Relative luminous intensity (%) 1000 Relative Luminous Intensity vs. Ambient Temperature 100 100 10 10 1 -60 -40 -20 0 20 40 60 80 100 10 10 10 1 10 2 Ambient Temperature Ta(°C) Forward Current IF(mA) Ta=25°C 20° 30° Radiation Diagram 0° IF (mA) 60 50 40 30 20 10 0 0 20 40 60 80 100 1.0 0.9 0.8 0.7 0.5 0.3 0.1 0.2 10° Forward Current 40° 50° 60° 70° 80° 90° 0.4 0.6 Ambient Temperature Ta (°C) Everlight Electronics Co., Ltd. Device No.: DSE-0000581 http://www.everlight.com Prepared date: 11-Dec-2008 Rev. 1 Page: 7 of 13 Prepared by: Josh Chou Technical Data Sheet Full Color Top View LEDs 67-03/RSGHBHC-B06/1T Typical Electro-Optical Characteristics Curves (BH) Spectrum Distribution 100 Relative luminous intensity (%) 75 Ta=25°C IF (mA) 50 40 30 20 10 0 Forward Current vs. Forward Voltage Ta=25°C 50 25 0 400 Forward Current 450 500 550 Wavelength λ (nm) 600 2.6 2.8 3.2 3.6 4.0 Forward Voltage VF (V) Relative Luminous Intensity vs. Forward Current Ta=25°C f=1KHz Duty=1/10 Relative luminous intensity (%) Relative luminous intensity (%) 1000 Relative Luminous Intensity vs. Ambient Temperature 1000 100 100 10 10 1 -40 -20 0 20 40 60 80 100 10 10 10 1 10 2 10 3 Ambient temperature Ta (°c) Forward Current Derating Curve 60 I (mA) 50 F Forward current I F (mA) Radiation Diagram 0° 10° Ta=25°C 20° 30° Forward Current 40 30 20 10 0 0 20 40 60 80 100 Ambient temperature Ta (°c) 1.0 0.9 0.8 0.7 0.5 0.3 0.1 0.2 0.4 0.6 40° 50° 60° 70° 80° 90° Everlight Electronics Co., Ltd. Device No.: DSE-0000581 http://www.everlight.com Prepared date: 11-Dec-2008 Rev. 1 Page: 8 of 13 Prepared by: Josh Chou Technical Data Sheet Full Color Top View LEDs 67-03/RSGHBHC-B06/1T Label Explanation Pb CAT: Luminous Intensity Rank HUE: Dom. Wavelength Rank EVERLIGHT RoHS CAT : XXX HUE : XXX REF : XXX CPN : P N : XXXXXXXXXXXXX XXXXXXXXXXXXX REF: Forward Voltage Rank QTY : XXX LOT NO : XXXXXXXXXX Reference : XXXXXXXX MADE IN TAIWAN Reel Dimensions Note: Tolerances unless dimension ±0.1mm; Unit = mm Everlight Electronics Co., Ltd. Device No.: DSE-0000581 http://www.everlight.com Prepared date: 11-Dec-2008 Rev. 1 Page: 9 of 13 Prepared by: Josh Chou Technical Data Sheet Full Color Top View LEDs 67-03/RSGHBHC-B06/1T Carrier Tape Dimensions: Loaded quantity 1000 PCS per reel. + Note: Tolerances unless dimension ±0.1mm; Unit = mm Moisture Resistant Packaging Label Aluminum moisture-proof bag Desiccant Label Everlight Electronics Co., Ltd. Device No.: DSE-0000581 http://www.everlight.com Prepared date: 11-Dec-2008 Rev. 1 Page: 10 of 13 Prepared by: Josh Chou Technical Data Sheet Full Color Top View LEDs 67-03/RSGHBHC-B06/1T Reliability Test Items and Conditions The reliability of products shall be satisfied with items listed below. Confidence level：90% LTPD：10% No. Items Test Condition Test Hours/Cycles Sample Size Ac/Re 1 Reflow Soldering Temp. : 260℃±5℃ Min. 5sec. H : +100℃ 15min 6 Min. 22 PCS. 0/1 2 Temperature Cycle ∫ 5 min L : -40℃ 15min H : +100℃ 5min 300 Cycles 22 PCS. 0/1 3 Thermal Shock ∫ 10 sec L : -10℃ 5min 300 Cycles 22 PCS. 0/1 4 High Temperature Storage Low Temperature Storage Temp. : 100℃ 1000 Hrs. 22 PCS. 0/1 5 Temp. : -40℃ 1000 Hrs. 22 PCS. 0/1 6 DC Operating Life IF = 20 mA 1000 Hrs. 22 PCS. 0/1 7 High Temperature / High Humidity 85℃/ 85%RH 1000 Hrs. 22 PCS. 0/1 Everlight Electronics Co., Ltd. Device No.: DSE-0000581 http://www.everlight.com Prepared date: 11-Dec-2008 Rev. 1 Page: 11 of 13 Prepared by: Josh Chou Technical Data Sheet Full Color Top View LEDs 67-03/RSGHBHC-B06/1T Precautions for Use 1. Over-current-proof Customer must apply resistors for protection; otherwise slight voltage shift will cause big current change (Burn out will happen). 2. Storage 2.1 Do not open moisture proof bag before the products are ready to use. 2.2 Before opening the package: The LEDs should be kept at 30℃ or less and 90%RH or less. 2.3 After opening the package: The LED's floor life is 72 hours under 30℃ or less and 60% RH or less. If unused LEDs remain, it should be stored in moisture proof packages. 2.4 If the moisture absorbent material (silica gel) has faded away or the LEDs have exceeded the storage time, baking treatment should be performed using the following conditions. Baking treatment: 60±5℃ for 24 hours. 3. Soldering Condition 3.1 Pb-free solder temperature profile 1~5 °C / Sec. 260°C. Max. 10 Sec. Max. 1~5 °C / Sec. Pre-heating 180~200°C 60 Sec. Max. Above 220°C 120 Sec. Max. 3.2 Reflow soldering should not be done more than two times. 3.3 When soldering, do not put stress on the LEDs during heating. 3.4 After soldering, do not warp the circuit board. Everlight Electronics Co., Ltd. Device No.: DSE-0000581 http://www.everlight.com Prepared date: 11-Dec-2008 Rev. 1 Page: 12 of 13 Prepared by: Josh Chou Technical Data Sheet Full Color Top View LEDs 67-03/RSGHBHC-B06/1T 4. Soldering Iron Each terminal is to go to the tip of soldering iron temperature less than 350℃ for 3 seconds within once in less than the soldering iron capacity 25W. Leave two seconds and more intervals, and do soldering of each terminal. Be careful because the damage of the product is often started at the time of the hand solder. 5. Repairing Repair should not be done after the LEDs have been soldered. When repairing is unavoidable, a double-head soldering iron should be used (as below figure). It should be confirmed beforehand whether the characteristics of the LEDs will or will not be damaged by repairing. EVERLIGHT ELECTRONICS CO., LTD. Office: No 25, Lane 76, Sec 3, Chung Yang Rd, Tucheng, Taipei 236, Taiwan, R.O.C Tel: 886-2-2267-2000, 2267-9936 Fax: 886-2267-6244, 2267-6189, 2267-6306 http://www.everlight.com Everlight Electronics Co., Ltd. Device No.: DSE-0000581 http://www.everlight.com Prepared date: 11-Dec-2008 Rev. 1 Page: 13 of 13 Prepared by: Josh Chou