67-03A/R6GHBHW-A01/2T/MS

SMD  REFLECTOR 67-03A/R6GHBHW-A01/2T/MS Features ․ ․ ․ ․ ․ ․ ․ Package in 8 mm tape on 7〞diameter reel Compatible with automatic placement equipment Various Compatible with infrared and vapor phase reflow solder process 4 Pins for separate control of each chip and better thermal management Good color fidelity and brightness uniformity across the viewing angle Pb-free RoHS compliant Description ․ The 67-03A SMD LED package provides a perfect solution when users need a clear view of signage display with any size board with 3 in 1 full color SMD LEDs which offer smaller pixel pitch between two LEDs to create a high resolution and better contrast with its black surface design. Applications ․ Indoor signage display applications ․ Indicator and backlighting for all consumer electronics. ․ Gaming equipment. ․ General use. 1 Copyright Revision :4 © LifecyclePhase: Release Date:2013-07-09 14:00:09.0 2012, Everlight All Rights Reserved. Release Date : Jul.03.2013. Issue No:DSE-0005051_v4 www.everlight.com Expired Period: Forever DATASHEET SMD  REFLECTOR 67-03A/R6GHBHW-A01/2T/MS Device Selection Guide Chip Materials Emitted Color AlGaInP Brilliant Red InGaN Brilliant Green InGaN Brilliant Blue Resin Color Water Diffuse Absolute Maximum Ratings (Ta=25℃) Parameter Symbol Rating Unit Reverse Voltage VR V Forward Current IF Peak Forward Current (Duty 1/10 @1KHz) IFP Power Dissipation Pd 5 R:25 G:25 B:25 R:60 G:100 B:100 R:60 G:95 B:95 Junction Temperature Tj 100 ℃ Operating Temperature Topr -40 ~ +85 ℃ Storage Temperature ESD (Classification acc. AEC Q101) Tstg -40 ~ +90 R:2000 G:150 B:150 ℃ Soldering Temperature Tsol 2 Copyright Revision :4 © LifecyclePhase: ESDHBM mA mA mW V Reflow Soldering : 260 ℃ for 10 sec. Hand Soldering : 350 ℃ for 3 sec. Release Date:2013-07-09 14:00:09.0 2012, Everlight All Rights Reserved. Release Date : Jul.03.2013. Issue No:DSE-0005051_v4 www.everlight.com Expired Period: Forever DATASHEET SMD  REFLECTOR 67-03A/R6GHBHW-A01/2T/MS Electro-Optical Characteristics (Ta=25℃) Parameter Symbol Luminous Intensity Iv Viewing Angle 2θ1/2 Peak Wavelength Λp Dominant Wavelength Λd Spectrum Radiation Bandwidth Δλ Forward Voltage VF Reverse Current IR R G B Min. Typ. Max. 165 650 150 ----- ------------120 632 518 468 288 1350 310 ----- R G ----B R 620.5 G 518.0 B 461.5 R G ----B R 1.7 G 2.7 B 2.7 ----- ----- Unit Condition mcd IF=20mA deg IF=20mA ----- nm IF=20mA 627.5 533.0 471.5 nm IF=20mA ----- nm IF=20mA V IF=20mA μA VR=5V 20 35 25 --------- 2.6 3.6 3.6 10 Note: 1. Tolerance of Luminous Intensity: ±10% 2. Tolerance of Dominant Wavelength: ±1nm 3. Tolerance of Forward Voltage: ±0.1V 3 Copyright Revision :4 © LifecyclePhase: Release Date:2013-07-09 14:00:09.0 2012, Everlight All Rights Reserved. Release Date : Jul.03.2013. Issue No:DSE-0005051_v4 www.everlight.com Expired Period: Forever DATASHEET SMD  REFLECTOR 67-03A/R6GHBHW-A01/2T/MS Floating Bin(Red) Bin Range of Luminous Intensity Bin Code Min. Max. Unit Condition RA RB RC 165 200 240 200 240 288 mcd IF =20mA Bin Range of Dominant Wavelength Bin Code Min. Max. Unit Condition R1 620.5 627.5 nm IF =20mA Floating Bin(Green) Bin Range of Luminous Intensity Bin Code Min. Max. Unit Condition GA GB GC GD 650 785 940 1130 785 940 1130 1350 mcd IF =20mA Bin Range of Dominant Wavelength Bin Code Min. Max. Unit Condition G1 G2 G3 518.0 523.0 528.0 523.0 528.0 533.0 nm IF =20mA Note: 1.Tolerance of Luminous Intensity: ±10% 2.Tolerance of Dominant Wavelength: ±1nm 4 Copyright Revision :4 © LifecyclePhase: Release Date:2013-07-09 14:00:09.0 2012, Everlight All Rights Reserved. Release Date : Jul.03.2013. Issue No:DSE-0005051_v4 www.everlight.com Expired Period: Forever DATASHEET SMD  REFLECTOR 67-03A/R6GHBHW-A01/2T/MS Bin Code Min. Max. Unit Condition BA BB BC BD 150 180 215 260 180 215 260 310 mcd IF =20mA Bin Range of Dominant Wavelength Bin Code Min. Max. Unit Condition B1 B2 461.5 466.5 466.5 471.5 nm IF =20mA Note: 1. Tolerance of Luminous Intensity: ±10% 2. Tolerance of Dominant Wavelength: ±1nm 5 Copyright Revision :4 © LifecyclePhase: Release Date:2013-07-09 14:00:09.0 2012, Everlight All Rights Reserved. Release Date : Jul.03.2013. Issue No:DSE-0005051_v4 www.everlight.com Expired Period: Forever DATASHEET SMD  REFLECTOR 67-03A/R6GHBHW-A01/2T/MS Typical Electro-Optical Characteristics Curves Relative luminous intensity (%) Spectrum Distribution Ta=25°C 100 RED GREEN BLUE 75 50 25 0 400 450 500 550 600 650 700 Wavelength λ (nm) Forward Current Derating Curve Ta=25°C 50 40 30 25 20 BLUE RED 5 Relative luminous intensity Forward Current IF (mA) Forward Current vs.Forward Voltage GREEN 10 0 1.6 2.0 2.4 2.8 3.0 3.4 3.8 4.2 4 3 RED BLUE 2 GREEN 1 0 0 ForwardFVoltage V (V) 20 60 80 100 Forward Current I FP (mA) X-X Radiation Diagram 40 Y-Y Ta=25°C 0° 10° 20° Radiation Diagram 0° 10° 30° RED GREEN Ta=25°C 20° 30° BLUE 40° 1.0 0.9 0.8 0.7 0.5 0.3 6 Copyright Revision :4 © LifecyclePhase: 0.1 0.2 0.4 0.6 40° 1.0 50° 0.9 50° 60° 0.8 60° 70° 80° 90° 70° 0.7 80° 90° 0.5 0.3 0.1 0.2 0.4 0.6 Release Date:2013-07-09 14:00:09.0 2012, Everlight All Rights Reserved. Release Date : Jul.03.2013. Issue No:DSE-0005051_v4 www.everlight.com Expired Period: Forever DATASHEET SMD  REFLECTOR 67-03A/R6GHBHW-A01/2T/MS Typical Electro-Optical Characteristics Curves Ambient Temperature vs. Ambient Temperature vs. Total Power Dissipation Power Dissipation 250 200 RED 150 GREEN 100 BLUE 50 0 0 20 40 60 85 Ambient Temperature Ta (°C) 7 Copyright Revision :4 © LifecyclePhase: 100 Total Power Dissipation(mW) Total Power Dissipation (mW) 250 200 150 100 50 0 0 20 40 60 85 100 Ambient Temperature Ta (°C) Release Date:2013-07-09 14:00:09.0 2012, Everlight All Rights Reserved. Release Date : Jul.03.2013. Issue No:DSE-0005051_v4 www.everlight.com Expired Period: Forever DATASHEET SMD  REFLECTOR 67-03A/R6GHBHW-A01/2T/MS Package Dimension 3 CL 4 1 2 2.8±0.2 3 0.82±0.1 2.2±0.1 CL 4 2 1 3.2±0.2 3.5±0.2 1.84±0.2 0.15±0.05 0.57±0.1 0.5±0.1 2.4±0.1 2.8±0.2 Recommended soldering pad design 0.8±0.1 1.6 1.8 0.7 2.2 1.8 Note: Tolerances unless mentioned ±0.1mm. Unit = mm 8 Copyright Revision :4 © LifecyclePhase: Release Date:2013-07-09 14:00:09.0 2012, Everlight All Rights Reserved. Release Date : Jul.03.2013. Issue No:DSE-0005051_v4 www.everlight.com Expired Period: Forever DATASHEET SMD  REFLECTOR 67-03A/R6GHBHW-A01/2T/MS Moisture Resistant Packing Materials Label Explanation ‧CPN: Customer’s Product Number ‧P/N: Product Number ‧QTY: Packing Quantity ‧CAT: Luminous Intensity Rank ‧HUE: Dom. Wavelength Rank ‧REF: Forward Voltage Rank ‧LOT No: Lot Number Reel Dimensions 9 Copyright Revision :4 © LifecyclePhase: Release Date:2013-07-09 14:00:09.0 2012, Everlight All Rights Reserved. Release Date : Jul.03.2013. Issue No:DSE-0005051_v4 www.everlight.com Expired Period: Forever DATASHEET SMD  REFLECTOR 67-03A/R6GHBHW-A01/2T/MS Carrier Tape Dimensions: Loaded Quantity 2000 pcs Per Reel + Note: Tolerances unless mentioned ±0.1mm. Unit = mm Moisture Resistant Packing Process Label Aluminum moistue-proof bag Desiccant Label Note: Tolerances unless mentioned ±0.1mm. Unit = mm 10 Copyright Revision :4 © LifecyclePhase: Release Date:2013-07-09 14:00:09.0 2012, Everlight All Rights Reserved. Release Date : Jul.03.2013. Issue No:DSE-0005051_v4 www.everlight.com Expired Period: Forever DATASHEET SMD  REFLECTOR 67-03A/R6GHBHW-A01/2T/MS Precautions for Use 1. Over-current-proof Customer must apply resistors for protection, otherwise slight voltage shift will cause big current change ( Burn out will happen ). 2. Storage 2.1 Do not open moisture proof bag before the products are ready to use. 2.2 Before opening the package: The LEDs should be kept at 30℃ or less and 90%RH or less. 2.3 After opening the package: The LED's floor life is 168Hrs under 30℃ or less and 60% RH or less.If unused LEDs remain, it should be stored in moisture proof packages. 2.4 If the moisture absorbent material (silica gel) has faded away or the LEDs have exceeded the storage time, baking treatment should be performed using the following conditions. Baking treatment : 60±5℃ for 24 hours. 2.5 Before using LEDs, baking treatment should be implemented based on the following conditions: pre-curing at 60±5℃ for 24 hours or 125±5℃ for 3 hours. 3. Soldering Condition 3.1 Pb-free solder temperature profile 260°C Max. 10sec. Max. Above255°C 30sec.Max. 3°C/sec.Max. 6°C/sec.Max. Pre-heating Above 217°C 60~150sec. 150~200°C 60~120sec. 3.2 Reflow soldering should not be done more than two times. 3.3 When soldering, do not put stress on the LEDs during heating. 3.4 After soldering, do not warp the circuit board. 4.Soldering Iron Each terminal is to go to the tip of soldering iron temperature less than 350℃ for 3 seconds within once in less than the soldering iron capacity 25W. Leave two seconds and more intervals, and do soldering of each terminal. Be careful because the damage of the product is often started at the time of the hand solder. 11 Copyright Revision :4 © LifecyclePhase: Release Date:2013-07-09 14:00:09.0 2012, Everlight All Rights Reserved. Release Date : Jul.03.2013. Issue No:DSE-0005051_v4 www.everlight.com Expired Period: Forever DATASHEET SMD  REFLECTOR 67-03A/R6GHBHW-A01/2T/MS 5.Repairing Repair should not be done after the LEDs have been soldered. When repairing is unavoidable, a double-head soldering iron should be used (as below figure). It should be confirmed beforehand whether the characteristics of the LEDs will or will not be damaged by repairing. 6.Directions for use The LEDs should be operated with forward bias. The driving circuit must be designed so that the LEDs are not subjected to forward or reverse voltage while it is off. If reverse voltage is continuously applied to the LEDs, It may cause migration resulting in LED damage. EVERLIGHT ELECTRONICS CO., LTD. Office: No 6-8, Zhonghua Rd., Shulin Dist., New Taipei City 23860, Taiwan, R.O.C 12 Copyright Revision :4 © LifecyclePhase: Tel: 886-2-2685-6688 Fax: 886-2-2685-6699 http://www.everlight.com Release Date:2013-07-09 14:00:09.0 2012, Everlight All Rights Reserved. Release Date : Jul.03.2013. Issue No:DSE-0005051_v4 www.everlight.com Expired Period: Forever