67-11BUWC-S400-X10-TR8

EVERLIGHT ELECTRONICS CO.,LTD. Technical Data Sheet TOP View LEDs With Lens 67-11BUWC/S400-X10/TR8 Features ․P-LCC-2 package. ․White package. ․Optical indicator. ․Colorless clear window. ․Wide viewing angle. ․Suitable for vapor-phase reflow, Infrared reflow and wave solder processes. ․Computable with automatic placement equipment. ․Available on tape and reel (12mm Tape). ․ESD protection. ․Pb-free. ․The product itself will remain within RoHS compliant version. Descriptions ․The 67-11B series is available in soft orange, green, blue and yellow. Due to the package design, the LED has wide viewing angle and optimized light coupling by inter reflector. This feature makes the ideal for light pipe application. The low current requirement makes this device ideal for portable equipment or any other application where power is at a premium. Applications ․Telecommunication: indicator and backlighting in telephone and fax. ․Flat backlight for LCD, switch and symbol. ․Light pipe application. ․General use. Device Selection Guide Chip Lens Color Material InGaN Emitted Color Pure White Water Clear Everlight Electronics Co., Ltd. Device No. :DSE-67B-035 http://www.everlight.com prepared date:1-Feb-2007 Rev.1 Page: 1 of 10 Prepared by:Ray Yuan EVERLIGHT ELECTRONICS CO.,LTD. 67-11BUWC/S400-X10/TR8 Package Dimensions C L 2.2±0.1 2.8±0.2 + Polarity - C L 3.25±0.2 3.0 For reflow soldering (propose) Note: The tolerances unless mentioned is ±0.1mm ,Unit = mm Everlight Electronics Co., Ltd. Device No. :DSE-67B-035 http://www.everlight.com prepared date:1-Feb-2007 Rev.1 Page: 2 of 10 Prepared by:Ray Yuan EVERLIGHT ELECTRONICS CO.,LTD. 67-11BUWC/S400-X10/TR8 Absolute Maximum Ratings (Ta=25℃) Parameter Reverse Voltage Forward Current Peak Forward Current (Duty 1/10 @1KHz) Power Dissipation Electrostatic Discharge(HBM) Operating Temperature Storage Temperature Soldering Temperature Symbol VR IF IFP Pd ESD Topr Tstg Tsol Rating 5 25 100 110 2000 -40 ~ +85 -40 ~ +90 Unit V mA mA mW V ℃ ℃ Reflow Soldering : 260 ℃ for 10 sec. Hand Soldering : 350 ℃ for 3 sec. Electro-Optical Characteristics (Ta=25℃) Parameter Luminous Intensity Forward Voltage Viewing Angle Symbol IV VF 2θ1/2 Min. 1420 ----Typ. --3.50 60 Max. --4.00 --Units mcd V deg Condition IF=20mA IF=20mA IF=20mA Everlight Electronics Co., Ltd. Device No. :DSE-67B-035 http://www.everlight.com prepared date:1-Feb-2007 Rev.1 Page: 3 of 10 Prepared by:Ray Yuan EVERLIGHT ELECTRONICS CO.,LTD. 67-11BUWC/S400-X10/TR8 Color Ranks x y A0 0.280 0.264 0.283 0.296 0.248 0.267 0.305 0.276 B4 0.307 0.304 0.330 0.330 0.315 0.330 0.360 0.339 B6 0.311 0.307 0.330 0.330 0.294 0.315 0.339 0.318 x y B3 0.287 0.283 0.304 0.307 0.295 0.305 0.33 0.315 B5 0.296 0.287 0.307 0.311 0.276 0.295 0.315 0.294 C0 0.330 0.330 0.361 0.356 0.318 0.360 0.385 0.351 x y x y x y x y CIE Chromaticity Diagram *The C.I.E. 1931 chromaticity diagram ( Tolerance ±0.01). Everlight Electronics Co., Ltd. Device No. :DSE-67B-035 http://www.everlight.com prepared date:1-Feb-2007 Rev.1 Page: 4 of 10 Prepared by:Ray Yuan EVERLIGHT ELECTRONICS CO.,LTD. 67-11BUWC/S400-X10/TR8 Typical Electro-Optical Characteristics Curves Everlight Electronics Co., Ltd. Device No. :DSE-67B-035 http://www.everlight.com prepared date:1-Feb-2007 Rev.1 Page: 5 of 10 Prepared by:Ray Yuan EVERLIGHT ELECTRONICS CO.,LTD. 67-11BUWC/S400-X10/TR8 Label explanation CAT: Luminous Intensity Rank HUE: Chromaticity Coordinates REF: Forward Voltage Rank Reel Dimensions Note: The tolerances unless mentioned is ±0.1mm ,Unit = mm Everlight Electronics Co., Ltd. Device No. :DSE-67B-035 http://www.everlight.com prepared date:1-Feb-2007 Rev.1 Page: 6 of 10 Prepared by:Ray Yuan EVERLIGHT ELECTRONICS CO.,LTD. 67-11BUWC/S400-X10/TR8 Carrier Tape Dimensions: Loaded quantity 500 PCS per reel. Polarity Note: The tolerances unless mentioned is ±0.1mm ,Unit = mm Moisture Resistant Packaging + Label Everlight Electronics Co., Ltd. Device No. :DSE-67B-035 Aluminum moisture-proof bag Desiccant Label http://www.everlight.com prepared date:1-Feb-2007 Rev.1 Page: 7 of 10 Prepared by:Ray Yuan EVERLIGHT ELECTRONICS CO.,LTD. 67-11BUWC/S400-X10/TR8 Reliability Test Items And Conditions The reliability of products shall be satisfied with items listed below. Confidence level：90% LTPD：10% No. 1 2 Items Reflow Soldering Temperature Cycle Test Condition Temp. : 260℃±5℃ Min. 5sec. H : +100℃ 15min ∫ 5 min L : -40℃ 15min H : +100℃ 5min ∫ 10 sec L : -10℃ 5min Temp. : 100℃ Temp. : -40℃ IF = 20 mA 85℃/ 85%RH Test Sample Ac/Re Hours/Cycles Size 6 min 300 Cycles 22 PCS. 22 PCS. 0/1 0/1 3 4 5 6 7 Thermal Shock High Temperature Storage Low Temperature Storage DC Operating Life High Temperature / High Humidity 300 Cycles 1000 Hrs. 1000 Hrs. 1000 Hrs. 1000 Hrs. 22 PCS. 22 PCS. 22 PCS. 22 PCS. 22 PCS. 0/1 0/1 0/1 0/1 0/1 Everlight Electronics Co., Ltd. Device No. :DSE-67B-035 http://www.everlight.com prepared date:1-Feb-2007 Rev.1 Page: 8 of 10 Prepared by:Ray Yuan EVERLIGHT ELECTRONICS CO.,LTD. 67-11BUWC/S400-X10/TR8 Precautions For Use 1. Over-current-proof Customer must apply resistors for protection, otherwise slight voltage shift will cause big current change ( Burn out will happen ). 2. Storage 2.1 Do not open moisture proof bag before the products are ready to use. 2.2 Before opening the package: The LEDs should be kept at 30℃ or less and 90%RH or less. 2.3 After opening the package: The LED's floor life is 1 year under 30℃ or less and 60% RH or less. If unused LEDs remain, it should be stored in moisture proof packages. 2.4 If the moisture absorbent material (silica gel) has faded away or the LEDs have exceeded the storage time, baking treatment should be performed using the following conditions. Baking treatment : 60±5℃ for 24 hours. 3. Soldering Condition 3.1 Pb-free solder temperature profile 1~5 °C / Sec. 260°C. Max. 10 Sec. Max. 1~5 °C / Sec. Pre-heating 180~200°C 60 Sec. Max. Above 220°C 120 Sec. Max. 3.2 Reflow soldering should not be done more than two times. 3.3 When soldering, do not put stress on the LEDs during heating. 3.4 After soldering, do not warp the circuit board. 4.Soldering Iron Each terminal is to go to the tip of soldering iron temperature less than 350℃ for 3 seconds within once in less than the soldering iron capacity 25W. Leave two seconds and more intervals, and do soldering of each terminal. Be careful because the damage of the product is often started at the time of the hand solder. Everlight Electronics Co., Ltd. Device No. :DSE-67B-035 http://www.everlight.com prepared date:1-Feb-2007 Rev.1 Page: 9 of 10 Prepared by:Ray Yuan EVERLIGHT ELECTRONICS CO.,LTD. 67-11BUWC/S400-X10/TR8 5.Repairing Repair should not be done after the LEDs have been soldered. When repairing is unavoidable, a double-head soldering iron should be used (as below figure). It should be confirmed beforehand whether the characteristics of the LEDs will or will not be damaged by repairing. EVERLIGHT ELECTRONICS CO., LTD. Office: No 25, Lane 76, Sec 3, Chung Yang Rd, Tucheng, Taipei 236, Taiwan, R.O.C Tel: 886-2-2267-2000, 2267-9936 Fax: 886-2267-6244, 2267-6189, 2267-6306 http://www.everlight.com Everlight Electronics Co., Ltd. Device No. :DSE-67B-035 http://www.everlight.com prepared date:1-Feb-2007 Rev.1 Page: 10 of 10 Prepared by:Ray Yuan