67-21/B7C-AS2U1N/2T

Technical Data Sheet Top View LEDs 67-21/B7C-AS2U1N/2T Features ․P-LCC-2 package. ․White package. ․Optical indicator. ․Colorless clear window. ․Wide viewing angle. ․Suitable for vapor-phase reflow. ․Computable with automatic placement equipment. ․Available on tape and reel (8mm Tape). ․Pb-free ․The product itself will remain within RoHS compliant version Descriptions ․The 67-21 series is available in soft orange, green, blue and yellow. Due to the package design, the LED has wide viewing angle and optimized light coupling by inter reflector. This feature makes TOP LED ideal for light pipe application. The low current requirement makes this device ideal for portable equipment or any other application where power is at a premium. Applications ․Automotive: backlighting in dashboard and switch. ․Telecommunication: indicator and backlighting in telephone and fax. ․Flat backlight for LCD, switch and symbol. ․Light pipe application. ․General use. Device Selection Guide Chip Material Emitted Color Resin Color Blue Water Clear InGaN Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 3 Device No. : DSE-0001045 Prepared date: 21-Feb.-2017 Prepared by: Irene Lin Ver.:3 Release Date:03/03/2017 　 狀態:Approved(正式發行) Page: 1 of 11 Technical Data Sheet Top View LEDs 67-21/B7C-AS2U1N/2T Package Dimensions Note: The tolerances unless mentioned is ±0.1mm; Unit = mm Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 3 Device No. : DSE-0001045 Prepared date: 21-Feb.-2017 Prepared by: Irene Lin Ver.:3 Release Date:03/03/2017 　 狀態:Approved(正式發行) Page: 2 of 11 Technical Data Sheet Top View LEDs 67-21/B7C-AS2U1N/2T AAsolute MaAimum Ratings ATaA2A℃A Parameter SymAol Rating Unit Reverse Voltage VR 5 V Forward Current IF 30 mA IFP 100 mA Power Dissipation Pd 110 mW Electrostatic Discharge (HBM) ESD 1000 V Operating Temperature Topr -40 ~ +85 ℃ Storage Temperature Tstg Soldering Temperature Tsol Peak Forward Current (Duty 1/10 @1KHz) -40 ~ +90 ℃ Reflow Soldering : 260 ℃ for 10 sec. Hand Soldering : 350 ℃ for 3 sec. Electro-Optical Characteristics ATaA2A℃A Parameter SymAol Min. Typ. MaA. Unit Condition Luminous Intensity Iv 225 ----- 565 mcd IF=20mA Viewing Angle 2θ1/2 ----- 120 ----- deg IF=20mA Peak Wavelength λP ----- 468 ----- nm IF=20mA Dominant Wavelength λd 464.5 ----- 476.5 nm IF=20mA Spectrum Radiation Bandwidth △λ ----- 25 ----- nm IF=20mA Forward Voltage VF 2.70 ----- 3.70 V IF=20mA Reverse Current IR ----- ----- 50 μA VR=5V Notes: 1.Tolerance of Luminous Intensity : ±11% 2.Tolerance of Dominant Wavelength : ±1nm 3.Tolerance of Forward Voltage : ±0.1V Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 3 Device No. : DSE-0001045 Prepared date: 21-Feb.-2017 Prepared by: Irene Lin Ver.:3 Release Date:03/03/2017 　 狀態:Approved(正式發行) Page: 3 of 11 Technical Data Sheet Top View LEDs 67-21/B7C-AS2U1N/2T Bin Range of Luminous Intensity Bin Code Min. MaA. S2 225 285 T1 285 360 T2 360 450 U1 450 565 Unit Condition mcd IF=20mA Unit Condition nm IF=20mA Unit Condition V IF=20mA Bin Range of Dominant Wavelength Group Bin Code Min. MaA. A9 464.5 467.5 A10 467.5 470.5 A11 470.5 473.5 A12 473.5 476.5 A Bin Range of Forward Voltage Group Bin Code Min. MaA. 10 2.70 2.90 11 2.90 3.10 12 3.10 3.30 13 3.30 3.50 14 3.50 3.70 N Notes: 1.Tolerance of Luminous Intensity : ±11% 2.Tolerance of Dominant Wavelength : ±1nm 3.Tolerance of Forward Voltage : ±0.1V Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 3 Device No. : DSE-0001045 Prepared date: 21-Feb.-2017 Prepared by: Irene Lin Ver.:3 Release Date:03/03/2017 　 狀態:Approved(正式發行) Page: 4 of 11 Technical Data Sheet Top View LEDs 67-21/B7C-AS2U1N/2T Typical Electro-Optical Characteristics Spectrum Distribution Forward Current vs. Forward Voltage Ta=25°C Forward Current 75 50 25 0 400 450 500 550 40 30 20 10 0 2.4 800 1000 2.6 3.0 3.4 3.8 4.2 Forward Voltage (VF)-volts Relative Luminous Intensity vs. Relative Luminous Intensity vs Ambient Temperature Forward Current 100 10 1 -60 -40 -20 0 20 40 60 80 100 Relative Luminous Intensity (%) Relative Luminous Intensity (%) Wavelength λ (nm) 1000 Ta=25°C f=1KHz Duty=1/10 100 10 1 0 10 2 10 1 10 Forward Current IF(mA) Ambient Temperature Ta (°C) Radiation Diagram Forward Current Derating Curve 0° 50 Forward Current I (mA) F Ta=25°C 50 I F (mA) Relative luminous intensity (%) 100 10° Ta=25°C 20° 30° 40 30 40° 1.0 20 10 0.9 50° 0.8 60° 70° 0.7 0 20 40 60 80 100 Ambient Temperature Ta (°C) 80° 90° 0.5 0.3 0.1 0.2 0.4 0.6 Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 3 Device No. : DSE-0001045 Prepared date: 21-Feb.-2017 Prepared by: Irene Lin Ver.:3 Release Date:03/03/2017 　 狀態:Approved(正式發行) Page: 5 of 11 Technical Data Sheet Top View LEDs 67-21/B7C-AS2U1N/2T LaAel EAplanation CAT: Luminous Intensity Rank Pb HUE: Dom. Wavelength Rank REF: Forward Voltage Rank EVERLIGHT CPN : P N : XXXXXXXXXXXXX RoHS XXXXXXXXXXXXX CAT : XXX HUE : XXX REF : XXX QTY : XXX LOT NO : XXXXXXXXXX Reference : XXXXXXXX MADE IN TAIWAN Reel Dimensions Note: The tolerances unless mentioned is ±0.1mm; Unit = mm Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 3 Device No. : DSE-0001045 Prepared date: 21-Feb.-2017 Prepared by: Irene Lin Ver.:3 Release Date:03/03/2017 　 狀態:Approved(正式發行) Page: 6 of 11 Technical Data Sheet Top View LEDs 67-21/B7C-AS2U1N/2T Carrier Tape Dimensions: Loaded Quantity 2000 pcs Per Reel. Note: 1.Tolerance unless mentioned is ±0.1mm; Unit = mm 2.Minimum packing amount is 250/500/1000/2000 pcs per reel. Moisture Resistant Packaging Label Aluminum moisture-proof bag Desiccant Label Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 3 Device No. : DSE-0001045 Prepared date: 21-Feb.-2017 Prepared by: Irene Lin Ver.:3 Release Date:03/03/2017 　 狀態:Approved(正式發行) Page: 7 of 11 Technical Data Sheet Top View LEDs 67-21/B7C-AS2U1N/2T ReliaAility Test Items and Conditions The reliability of products shall be satisfied with items listed below. Confidence level：90% LTPD：10% No. Items Test Condition 1 Reflow Soldering 2 Temperature Cycle 3 Thermal Shock 4 Test Hours/Cycles Sample Size Ac/Re 6 Min. 22 PCS. 0/1 22 PCS. 0/1 22 PCS. 0/1 Temp. : 260℃±5℃ Min. 10sec. H : +100℃ 15min ∫ 5 min L : -40℃ 15min H : +100℃ 5min ∫ 10 sec L : -10℃ 5min 300 Cycles High Temperature Storage Temp. : 100℃ 1000 Hrs. 22 PCS. 0/1 5 Low Temperature Storage Temp. : -40℃ 1000 Hrs. 22 PCS. 0/1 6 DC Operating Life IF = 20 mA 1000 Hrs. 22 PCS. 0/1 7 High Temperature / High Humidity 85℃/ 85%RH 1000 Hrs. 22 PCS. 0/1 300 Cycles Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 3 Device No. : DSE-0001045 Prepared date: 21-Feb.-2017 Prepared by: Irene Lin Ver.:3 Release Date:03/03/2017 　 狀態:Approved(正式發行) Page: 8 of 11 Technical Data Sheet Top View LEDs 67-21/B7C-AS2U1N/2T Precautions for Use 1. Over-current-proof Customer must apply resistors for protection, otherwise slight voltage shift will cause big current change ( Burn out will happen ). 2. Storage 2.1 Do not open moisture proof bag before the products are ready to use. 2.2 Before opening the package: The LEDs should be kept at 30℃ or less and 90%RH or less. 2.3 After opening the package: The LED's floor life are 168 hours under 30℃ or less and 60% RH or less.If unused LEDs remain, it should be stored in moisture proof packages. 2.4 If the moisture absorbent material (silica gel) has faded away or the LEDs have exceeded the storage time, baking treatment should be performed using the following conditions. Baking treatment : 60±5℃ for 24 hours. 3. Soldering Condition 3.1 Pb-free solder temperature profile 260°C Max. 10sec. Max. Above255°C 30sec.Max. 3°C/sec.Max. 6°C/sec.Max. Pre-heating Above 217°C 60~150sec. 150~200°C 60~120sec. 3.2 Reflow soldering should not be done more than two times. 3.3 When soldering, do not put stress on the LEDs during heating. 3.4 After soldering, do not warp the circuit board. Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 3 Device No. : DSE-0001045 Prepared date: 21-Feb.-2017 Prepared by: Irene Lin Ver.:3 Release Date:03/03/2017 　 狀態:Approved(正式發行) Page: 9 of 11 Technical Data Sheet Top View LEDs 67-21/B7C-AS2U1N/2T 4. Soldering Iron Each terminal is to go to the tip of soldering iron temperature less than 350℃ for 3 seconds within once in less than the soldering iron capacity 25W. Leave two seconds and more intervals, and do soldering of each terminal. Be careful because the damage of the product is often started at the time of the hand solder. 5. Repairing Repair should not be done after the LEDs have been soldered. When repairing is unavoidable, a double-head soldering iron should be used (as below figure). It should be confirmed beforehand whether the characteristics of the LEDs will or will not be damaged by repairing. Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 3 Device No. : DSE-0001045 Prepared date: 21-Feb.-2017 Prepared by: Irene Lin Ver.:3 Release Date:03/03/2017 　 狀態:Approved(正式發行) Page: 10 of 11 Technical Data Sheet Top View LEDs 67-21/B7C-AS2U1N/2T DISCLAIMER 1. EVERLIGHT reserves the right(s) on the adjustment of product material mix for the specification. 2. The product meets EVERLIGHT published specification for a period of twelve (12) months from date of shipment. 3. The graphs shown in this datasheet are representing typical data only and do not show guaranteed values. 4. When using this product, please observe the absolute maximum ratings and the instructions for using outlined in these specification sheets. EVERLIGHT assumes no responsibility for any damage resulting from the use of the product which does not comply with the absolute maximum ratings and the instructions included in these specification sheets. 5. These specification sheets include materials protected under copyright of EVERLIGHT. Reproduction in any form is prohibited without obtaining EVERLIGHT’s prior consent. 6. This product is not intended to be used for military, aircraft, automotive, medical, life sustaining or life saving applications or any other application which can result in human injury or death. Please contact authorized Everlight sales agent for special application request. Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 3 Device No. : DSE-0001045 Prepared date: 21-Feb.-2017 Prepared by: Irene Lin Ver.:3 Release Date:03/03/2017 　 狀態:Approved(正式發行) Page: 11 of 11