67-21/GBC-YV2W2N/2T

SMD  REFLECTOR 67-21/GBC-YV2W2N/2T Features ․ P-LCC-2 package. ․ White package. ․ Optical indicator. ․ Colorless clear window. ․ Wide viewing angle. ․ Suitable for vapor-phase reflow, Infrared reflow and wave solder processes. ․ Computable with automatic placement equipment. ․ Available on tape and reel (8mm Tape). ․ Pb-free ․ The product itself will remain within RoHS compliant version Descriptions ․ The 67-21 series is available in soft orange, green,blue and yellow. Due to the package design, the LED has wide viewing angle and optimized light coupling by inter reflector. This feature makes TOP LED ideal for light pipe application. The low current requirement makes this device ideal for portable equipment or any other application where power is at a premium. Applications ․ ․ ․ ․ ․ 1 Automotive: backlighting in dashboard and switch. Telecommunication: indicator and backlighting in telephone and fax. Flat backlight for LCD, switch and symbol. Light pipe application. General use. Copyright © 2010, Everlight All Rights Reserved. Release Date : Apr.01.2013. Issue No: DSE-0000955 www.everlight.com DATASHEET SMD  REFLECTOR 67-21/GBC-YV2W2N/2T Device Selection Guide Chip Materials InGaN/SiC Emitted Color Resin Color Brilliant Green Water Clear Absolute Maximum Ratings (Ta=25℃) Parameter Symbol Rating Unit Reverse Voltage VR 5 V Forward Current IF 30 mA IFP 100 mA Power Dissipation Pd 110 mW Electrostatic Discharge (HBM) ESD 1000 V Operating Temperature Topr -40 ~ +85 ℃ Storage Temperature Tstg -40 ~ +90 ℃ Soldering Temperature Tsol Peak Forward Current (Duty 1/10 @1KHz) Reflow Soldering : 260 ℃ for 30 sec. Hand Soldering : 350 ℃ for 3 sec. Parameter Symbol Min. Typ. Max. Unit Condition Luminous Intensity Iv 900 ----- 1800 mcd IF=20mA Viewing Angle 2θ1/2 ----- 120 ----- deg IF=20mA Peak Wavelength λp ----- 518 ----- nm IF=20mA Dominant Wavelength λd 520 ---- 535 nm IF=20mA Spectrum Radiation Bandwidth Δλ ----- 35 ----- nm IF=20mA Forward Voltage VF 2.7 ---- 3.7 V IF=20mA Reverse Current IR ----- ----- 50 μA VR=5V Note: 1. Tolerance of Luminous Intensity: ±11% 2. Tolerance of Dominant Wavelength: ±1nm 3. Tolerance of Forward Voltage: ±0.1V 2 Copyright © 2010, Everlight All Rights Reserved. Release Date : Apr.01.2013 Issue No: DSE-0000955 www.everlight.com DATASHEET SMD  REFLECTOR 67-21/GBC-YV2W2N/2T Bin Range of Luminous Intensity Bin Code Min. Max. Unit Condition V2 W1 W2 900 1120 1420 1120 1420 1800 mcd IF =20mA Note: Tolerance of Luminous Intensity: ±11% Bin Range of Dominant Wavelength Bin Code Min. Max. Unit Condition X Y Z 520 525 530 525 530 535 nm IF =20mA Note: Tolerance of Dominant Wavelength: ±1nm Bin Range of Forward Voltage Bin Code Min. Max. Unit Condition 10 11 12 13 14 2.70 2.90 3.10 3.30 3.50 2.90 3.10 3.30 3.50 3.70 V IF=20mA Note: Tolerance of Forward Voltage : ±0.1V 3 Copyright © 2010, Everlight All Rights Reserved. Release Date : Apr.01.2013 Issue No: DSE-0000955 www.everlight.com DATASHEET SMD  REFLECTOR 67-21/GBC-YV2W2N/2T Typical Electro-Optical Characteristics Forward Current vs. Forward Voltage Forward Current IF (mA) 75 50 25 0 400 Relative luminous intensity (% ) Ta=25°C 100 450 500 550 Wavelength λ (nm) 40 30 20 10 0 2.8 600 3.0 3.2 3.6 3.8 4.0 Relative Luminous Intensity vs. Relative Luminous Intensity vs Ambient Temperature Forward Current 1000 Relative luminous intensity (% ) Relative luminous intensity (% ) Spectrum Distribution 100 10 1 -60 -40 -20 0 20 40 60 80 100 Ta=25° 1000 f=1KHz Duty=1/10 100 10 1 0 10 Ambient Temperature Ta (°C) 1 10 2 10 Forward Current I (mA) Radiation Diagram Forward Current Derating Curve Forward Current IF (mA) 50 40 30 20 10 0 0 20 40 60 85 100 Ambient Temperature Ta (°C) 4 Copyright © 2010, Everlight All Rights Reserved. Release Date : Apr.01.2013 Issue No: DSE-0000955 www.everlight.com DATASHEET SMD  REFLECTOR 67-21/GBC-YV2W2N/2T Package Dimensions 5 Copyright © 2010, Everlight All Rights Reserved. Release Date : Apr.01.2013 Issue No: DSE-0000955 www.everlight.com DATASHEET SMD  REFLECTOR 67-21/GBC-YV2W2N/2T Moisture Resistant Packing Materials CAT: Luminous Intensity Rank HUE: Dom. Wavelength Rank REF: Forward Voltage Rank Label Explanation CAT: Luminous Intensity Rank HUE: Dom. Wavelength Rank REF: Forward Voltage Rank Pb EVERLIGHT CPN : P N : XXXXXXXXXXXXX RoHS XXXXXXXXXXXXX CAT : XXX HUE : XXX REF : XXX QTY : XXX LOT NO : XXXXXXXXXX Reference : XXXXXXXX MADE IN TAIWAN Reel Dimensions Note: The tolerances unless mentioned is ±0.1mm ,Unit = mm 6 Copyright © 2010, Everlight All Rights Reserved. Release Date : Apr.01.2013 Issue No: DSE-0000955 www.everlight.com DATASHEET SMD  REFLECTOR 67-21/GBC-YV2W2N/2T Carrier Tape Dimensions: Loaded Quantity 2000 pcs Per Reel. Note: The tolerances unless mentioned is ±0.1mm; Unit = mm Moisture Resistant Packaging Label 7 Aluminum moisture-proof bag Copyright © 2010, Everlight All Rights Reserved. Release Date : Apr.01.2013 Issue No: DSE-0000955 Desiccant Label www.everlight.com DATASHEET SMD  REFLECTOR 67-21/GBC-YV2W2N/2T Reliability Test Items and Conditions The reliability of products shall be satisfied with items listed below. Confidence level：90% LTPD：10% No. Items 1 Reflow Soldering 2 Temperature Cycle 3 Thermal Shock 4 5 6 High Temperature Storage Low Temperature Storage DC Operating Life High Temperature / High Humidity 7 Test Condition Temp. : 260 ℃±5℃ Min. 5sec. H : +100℃ 15m in ∫ 5 min L : -40℃ 15m in H : +100℃ 5m in ∫ 10 sec L : -10℃ 5m in Temp. : 100 ℃ Temp. : -40℃ IF = 20 mA Test Hours/Cycles Sample Size Ac/Re 6 Min. 22 PCS. 0/1 300 Cycles 22 PCS. 0/1 300 Cycles 22 PCS. 0/1 1000 Hrs. 1000 Hrs. 1000 Hrs. 22 PCS. 22 PCS. 22 PCS. 0/1 0/1 0/1 85℃/ 85% R H 1000 Hrs. 22 PCS. 0/1 Precautions for Use 1. Over-current-proof Customer must apply resistors for protection, otherwise slight voltage shift will cause big current change ( Burn out will happen ). 2. Storage 2.1 Do not open moisture proof bag before the products are ready to use. 2.2 Before opening the package: The LEDs should be kept at 30℃ or le s s a nd 90% RH or le s s . 2.3 After opening the package: The LED's floor life are 168 hours under 30℃ or less and 60% RH or less. If unused LEDs remain, it should be stored in moisture proof packages. 2.4 If the moisture absorbent material (silica gel) has faded away or the LEDs have exceeded the storage time, baking treatment should be performed using the following conditions. Baking treatment : 60±5℃ for 24 hours . 3. Soldering Condition 3.1 Pb-free solder temperature profile 3 1~5 °C / Sec. 260°C. Max. 10 Sec. Max. 1~5 °C / Sec. Pre-heating 180~200°C 60 Sec. Max. Above 220°C 120 Sec. Max. 8 Copyright © 2010, Everlight All Rights Reserved. Release Date : Apr.01.2013 Issue No: DSE-0000955 www.everlight.com DATASHEET SMD  REFLECTOR 67-21/GBC-YV2W2N/2T 3.2 Reflow soldering should not be done more than two times. 3.3 When soldering, do not put stress on the LEDs during heating. 3.4 After soldering, do not warp the circuit board. 4. Soldering Iron Each terminal is to go to the tip of soldering iron temperature less than 350℃ for 3 s e conds within once in le s s than the soldering iron capacity 25W. Leave two seconds and more intervals, and do soldering of each terminal. Be careful because the damage of the product is often started at the time of the hand solder. 5. Repairing Repair should not be done after the LEDs have been soldered. When repairing is unavoidable, a double-head soldering iron should be used (as below figure). It should be confirmed beforehand whether the characteristics of the LEDs will or will not be damaged by repairing. 9 Copyright © 2010, Everlight All Rights Reserved. Release Date : Apr.01.2013 Issue No: DSE-0000955 www.everlight.com