67-21-T2C-YV2W2B22-2A0

Technical Data Sheet Top View LEDs 67-21/T2C-YV2W2B22/2A0 Features ․P-LCC-2 package. ˙Fluorescence Type ․High Luminous Intensity ․High Efficiency ․Pb-free. ․The product itself will remain within RoHS compliant version. Descriptions The white LED which was fabricated using a blue LED and a phosphor, and the phosphor is excited by blue light and emits yellow fluorescence.The mixture of blue light and yellow light results in a white emission. Applications ․OA equipment ․Backlighting of full color LCD ․Automotive equipment ․Replacement of conventional light bulbs and fluorescent lamps Device Selection Guide Chip Emitted Color Material InGaN White Water Clear Resin Color Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 1 Page: 1 of 11 Revision Device No. : DSE-0001216 :1 LifecyclePhase: Prepared date: 03-Nov-2008Release Date:2009-04-17 Prepared by: Teresa 23:19:10.0 Expired Period: Forever Technical Data Sheet Top View LEDs 67-21/T2C-YV2W2B22/2A0 Package Dimensions C L + Polarity - For reflow soldering (propose) Note : Tolerances dimension ±0.1 unless otherwise noted Unit : mm Note: Tolerance unless mentioned is: ±0.1mm; Unit = mm Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 1 Page: 2 of 11 Revision Device No. : DSE-0001216 :1 LifecyclePhase: Prepared date: 03-Nov-2008Release Date:2009-04-17 Prepared by: Teresa 23:19:10.0 Expired Period: Forever Technical Data Sheet Top View LEDs 67-21/T2C-YV2W2B22/2A0 Absolute Maximum Ratings (Ta=25℃) Parameter Reverse Voltage Forward Current Peak Forward Current (Duty 1/10 @1KHz) Power Dissipation Electrostatic Discharge(HBM) Operating Temperature Storage Temperature Soldering Temperature Symbol VR IF IFP Pd ESD Topr Tstg Tsol Rating 5 30 100 110 1000 -40 ~ +85 -40 ~ +90 Unit V mA mA mW V ℃ ℃ Reflow Soldering : 260 ℃ for 10 sec. Hand Soldering : 350 ℃ for 3 sec. Electro-Optical Characteristics (Ta=25℃) Parameter Luminous Intensity Viewing Angle Forward Voltage Reverse Current Symbol IV 2θ1/2 VF IR Min. 900 -3.00 -Typ. -120 --Max. 1800 -3.60 50 Units mcd deg V μA Condition IF=20mA IF=20mA IF=20mA VR=5V Notes: 1.Tolerance of Luminous Intensity: ±11% 2.Tolerance of Forward Voltage: ±0.05V Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 1 Page: 3 of 11 Revision Device No. : DSE-0001216 :1 LifecyclePhase: Prepared date: 03-Nov-2008Release Date:2009-04-17 Prepared by: Teresa 23:19:10.0 Expired Period: Forever Technical Data Sheet Top View LEDs 67-21/T2C-YV2W2B22/2A0 Bin Range of Luminous Intensity Bin Code V2 W1 W2 Min. 900 1120 1420 Max. 1120 1420 1800 mcd IF=20mA Unit Condition Bin Range of Forward Voltage Group Bin Code 37 38 B22 39 40 41 42 Min. 3.00 3.10 3.20 3.30 3.40 3.50 Max. 3.10 3.20 3.30 3.40 3.50 3.60 V IF=20mA Unit Condition Notes: 1.Tolerance of Luminous Intensity: ±11% 2.Tolerance of Forward Voltage: ±0.1V Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 1 Page: 4 of 11 Revision Device No. : DSE-0001216 :1 LifecyclePhase: Prepared date: 03-Nov-2008Release Date:2009-04-17 Prepared by: Teresa 23:19:10.0 Expired Period: Forever Technical Data Sheet Top View LEDs 67-21/T2C-YV2W2B22/2A0 Bin Range of Chromaticity Coordinate Group Bin Code CIE_x 0.3090 B6-1 Y B6-2 0.3070 0.3185 0.3195 0.3195 0.3185 0.3300 CIE_y 0.3045 0.3150 0.3270 0.3165 0.3165 0.3270 0.3390 B6-4 B6-3 Bin Code CIE_x 0.3110 0.3090 0.3195 0.3205 0.3205 0.3195 0.3300 0.3300 CIE_y 0.2940 0.3045 0.3165 0.3060 0.3060 0.3165 0.3285 0.3180 IF =20mA Condition 0.3300 0.3285 Note: Tolerance of Chromaticity Coordinates: ±0.01 The C.I.E. 1931 Chromaticity Diagram 0.34 B6-2 0.32 B6-1 B6-4 y B6-3 0.30 0.31 0.32 0.33 x Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 1 Page: 5 of 11 Revision Device No. : DSE-0001216 :1 LifecyclePhase: Prepared date: 03-Nov-2008Release Date:2009-04-17 Prepared by: Teresa 23:19:10.0 Expired Period: Forever Technical Data Sheet Top View LEDs 67-21/T2C-YV2W2B22/2A0 Typical Electro-Optical Characteristics Curves Spectrum Distribution Ta=25°C Relative luminous intensity (%) 100 75 50 25 I F (mA) 50 40 30 20 10 0 2.4 3.8 4.2 2.6 3.0 3.4 Forward Voltage (VF)-volts Forward Current vs. Forward Voltage Ta=25°C 0 400 500 600 700 800 Wavelength λ (nm) Forward Current Relative Luminous Intensity vs. Relative luminous intensity (%) Relative luminous intensity (%) 1000 Ambient Temperature 1000 Relative Luminous Intensity vs Forward Current Ta=25°C f=1KHz Duty=1/10 100 100 10 10 1 -60 -40 -20 0 20 40 60 80 100 10 10 10 1 10 2 Ambient Temperature Ta (°C) Forward Current Derating Curve 50 Forward Current I (mA) F 40 30 20 10 0 20 40 60 80 100 Ambient Temperature Ta (°C) 1.0 0.9 0.8 0.7 Forward Current IF(mA) Radiation Diagram 0° 10° Ta=25°C 20° 30° 40° 50° 60° 70° 80° 90° 0.5 0.3 0.1 0.2 0.4 0.6 Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 1 Page: 6 of 11 Revision Device No. : DSE-0001216 :1 LifecyclePhase: Prepared date: 03-Nov-2008Release Date:2009-04-17 Prepared by: Teresa 23:19:10.0 Expired Period: Forever Technical Data Sheet Top View LEDs 67-21/T2C-YV2W2B22/2A0 Label Explanation CAT: Luminous Intensity Rank HUE: Dom. Wavelength Rank REF: Forward Voltage Rank Pb EVERLIGHT RoHS CAT : XXX HUE : XXX REF : XXX CPN : P N : XXXXXXXXXXXXX XXXXXXXXXXXXX QTY : XXX LOT NO : XXXXXXXXXX Reference : XXXXXXXX MADE IN TAIWAN Reel Dimensions Note: Tolerance unless mentioned is: 1mm; Unit = mm Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 1 Page: 7 of 11 Revision Device No. : DSE-0001216 :1 LifecyclePhase: Prepared date: 03-Nov-2008Release Date:2009-04-17 Prepared by: Teresa 23:19:10.0 Expired Period: Forever Technical Data Sheet Top View LEDs 67-21/T2C-YV2W2B22/2A0 Carrier Tape Dimensions: Loaded Quantity 2000 pcs Per Reel. Note: Tolerance unless mentioned is: ±0.1mm; Unit = mm Moisture Resistant Packaging Label Aluminum moisture-proof bag Desiccant Label Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 1 Page: 8 of 11 Revision Device No. : DSE-0001216 :1 LifecyclePhase: Prepared date: 03-Nov-2008Release Date:2009-04-17 Prepared by: Teresa 23:19:10.0 Expired Period: Forever Technical Data Sheet Top View LEDs 67-21/T2C-YV2W2B22/2A0 Reliability Test Items and Conditions The reliability of products shall be satisfied with items listed below. Confidence level：90% LTPD：10% No. 1 2 3 4 5 6 7 Items Reflow Soldering Temperature Cycle Thermal Shock High Temperature Storage Low Temperature Storage DC Operating Life High Temperature / High Humidity Test Condition Temp. : 260℃±5℃ Min. 10sec. H : +100℃ 15min ∫ 5 min L : -40℃ 15min H : +100℃ 5min ∫ 10 sec L : -10℃ 5min Temp. : 100℃ Temp. : -40℃ IF = 20 mA 85℃/ 85%RH Test Hours/Cycles 6 Min. 300 Cycles 300 Cycles 1000 Hrs. 1000 Hrs. 1000 Hrs. 1000 Hrs. Sample Size 22 PCS. 22 PCS. 22 PCS. 22 PCS. 22 PCS. 22 PCS. 22 PCS. Ac/Re 0/1 0/1 0/1 0/1 0/1 0/1 0/1 Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 1 Page: 9 of 11 Revision Device No. : DSE-0001216 :1 LifecyclePhase: Prepared date: 03-Nov-2008Release Date:2009-04-17 Prepared by: Teresa 23:19:10.0 Expired Period: Forever Technical Data Sheet Top View LEDs 67-21/T2C-YV2W2B22/2A0 Precautions for Use 1. Over-current-proof Customer must apply resistors for protection; otherwise slight voltage shift will cause big current change (Burn out will happen). 2. Storage 2.1 Do not open moisture proof bag before the products are ready to use. 2.2 Before opening the package: The LEDs should be kept at 30℃ or less and 90%RH or less. 2.3 After opening the package: The LED's floor life are 168 hours under 30℃ or less and 60% RH or less. If unused LEDs remain, it should be stored in moisture proof packages. 2.4 If the moisture absorbent material (silica gel) has faded away or the LEDs have exceeded the storage time, baking treatment should be performed using the following conditions. Baking treatment: 60±5℃ for 24 hours. 3. Soldering Condition 3.1 Pb-free solder temperature profile 1~5 °C / Sec. 260°C. Max. 10 Sec. Max. 1~5 °C / Sec. Pre-heating 180~200°C 60 Sec. Max. Above 220°C 120 Sec. Max. 3.2 Reflow soldering should not be done more than two times. 3.3 When soldering, do not put stress on the LEDs during heating. 3.4 After soldering, do not warp the circuit board. 4. Soldering Iron Each terminal is to go to the tip of soldering iron temperature less than 350℃ for 3 seconds within once in less than the soldering iron capacity 25W. Leave two seconds and more intervals, and do soldering of each terminal. Be careful because the damage of the product is often started at the time of the hand solder. Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 1 Page: 10 of 11 Revision Device No. : DSE-0001216 :1 LifecyclePhase: Prepared date: 03-Nov-2008Release Date:2009-04-17 Prepared by: Teresa 23:19:10.0 Expired Period: Forever Technical Data Sheet Top View LEDs 67-21/T2C-YV2W2B22/2A0 5. Repairing Repair should not be done after the LEDs have been soldered. When repairing is unavoidable, a double-head soldering iron should be used (as below figure). It should be confirmed beforehand whether the characteristics of the LEDs will or will not be damaged by repairing. EVERLIGHT ELECTRONICS CO., LTD. Office: No 25, Lane 76, Sec 3, Chung Yang Rd, Tucheng, Taipei 236, Taiwan, R.O.C Tel: 886-2-2267-2000, 2267-9936 Fax: 886-2267-6244, 2267-6189, 2267-6306 http://www.everlight.com Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 1 Page: 11 of 11 Revision Device No. : DSE-0001216 :1 LifecyclePhase: Prepared date: 03-Nov-2008Release Date:2009-04-17 Prepared by: Teresa 23:19:10.0 Expired Period: Forever