67-21B-G6C-BR1S2B-BT

EVERLIGHTELECTRONICS CO.,LTD. Technical Data Sheet TOP View LEDs With Lens 67-21B/G6C-BR1S2B/BT Features ․P-LCC-2 package. ․High flux output. ․High current capability. ․White package. ․Optical indicator. ․Colorless clear window. ․Ideal for backlight and light pipe application. ․Inter reflector. ․Suitable for automatic placement equipment. ․Suitable for reflow and wave solder processes. ․Available on tape and reel (12mm Tape). ․Pb-free. ․The product itself will remain within RoHS compliant version. Descriptions ․The 67-21B series is available in soft orange, green, blue and yellow. Due to the package design, the LED has wide viewing angle and optimized light coupling by inter reflector. This feature makes the ideal for light pipe application. The low current requirement makes this device ideal for portable equipment or any other application where power is at a premium. Applications ․Telecommunication: indicator and backlighting in telephone and fax. ․Flat backlight for LCD, switch and symbol. ․Light pipe application. ․General use. Device Selection Guide Chip Material AlGaInP Brilliant Yellow Green Water Clear Emitted Color Lens Color Everlight Electronics Co., Ltd. Device No. :DSE-67B-056 http://www.everlight.com prepared date:29-May-2007 Rev. 1 Page: 1 of 10 prepared by: Tracy EVERLIGHTELECTRONICS CO.,LTD. 67-21B/G6C-BR1S2B/BT Package Dimensions C L 2.2±0.1 2.8±0.2 + Polarity - C L 3.25±0.2 3.0 For reflow soldering (propose) Notes: Tolerances Unless Dimension ±0.1mm,Unit = mm Everlight Electronics Co., Ltd. Device No. :DSE-67B-056 http://www.everlight.com prepared date:29-May-2007 Rev. 1 Page: 2 of 10 prepared by: Tracy EVERLIGHTELECTRONICS CO.,LTD. 67-21B/G6C-BR1S2B/BT Absolute Maximum Ratings (Ta=25℃) Parameter Reverse Voltage Forward Current Peak Forward Current (Duty 1/10 @1KHz) Power Dissipation Electrostatic Discharge(HBM) Operating Temperature Storage Temperature Soldering Temperature Symbol VR IF IFP Pd ESD Topr Tstg Tsol Rating 5 25 60 60 2000 -40 ~ +85 -40 ~ +90 Unit V mA mA mW V ℃ ℃ Reflow Soldering : 260 ℃ for 10 sec. Hand Soldering : 350 ℃ for 3 sec. Electronic Optical Characteristics (Ta=25℃) : Parameter Luminous Intensity Viewing Angle Peak Wavelength Dominant Wavelength Spectrum Radiation Bandwidth Forward Voltage Reverse Current Symbol Iv 2θ1/2 λp λd △λ VF IR Min. 112 --------567.5 ----1.75 ----Typ. ----60 575 ----20 --------Max. 285 --------575.5 ----2.35 10 Unit mcd deg nm nm nm V μA Condition IF=20mA IF=20mA IF=20mA IF=20mA IF=20mA IF=20mA VR=5V Notes: 1.Tolerance of Dominant Wavelength: ±1nm 2.Tolerance of Luminous Intensity: ±11% 3.Tolerance of Forward Voltage: ±0.05V Everlight Electronics Co., Ltd. Device No. :DSE-67B-056 http://www.everlight.com prepared date:29-May-2007 Rev. 1 Page: 3 of 10 prepared by: Tracy EVERLIGHTELECTRONICS CO.,LTD. 67-21B/G6C-BR1S2B/BT Bin Range of Dom. Wavelength Group Bin Code C15 B C16 C17 C18 Min 567.5 569.5 571.5 573.5 Max 569.5 571.5 573.5 575.5 nm IF=20mA Unit Condition Bin Range of Luminous Intensity Bin Code R1 R2 S1 S2 Min. 112 140 180 225 Max. 140 180 225 285 mcd IF=20mA Unit Conduction Bin Range of Forward Voltage Group Bin 0 B 1 2 Min 1.75 1.95 2.15 Max 1.95 2.15 2.35 V IF=20mA Unit Condition Notes: 1.Tolerance of Dominant Wavelength: ±1nm 2.Tolerance of Luminous Intensity: ±11% 3.Tolerance of Forward Voltage: ±0.05V Everlight Electronics Co., Ltd. Device No. :DSE-67B-056 http://www.everlight.com prepared date:29-May-2007 Rev. 1 Page: 4 of 10 prepared by: Tracy EVERLIGHTELECTRONICS CO.,LTD. 67-21B/G6C-BR1S2B/BT Typical Electro-Optical Characteristics Curves Everlight Electronics Co., Ltd. Device No. :DSE-67B-056 http://www.everlight.com prepared date:29-May-2007 Rev. 1 Page: 5 of 10 prepared by: Tracy EVERLIGHTELECTRONICS CO.,LTD. 67-21B/G6C-BR1S2B/BT Label explanation CAT: Luminous Intensity Rank HUE: Dom. Wavelength Rank REF: Forward Voltage Rank Reel Dimensions Note: The tolerances unless mentioned is ±0.1mm ,Unit = mm Everlight Electronics Co., Ltd. Device No. :DSE-67B-056 http://www.everlight.com prepared date:29-May-2007 Rev. 1 Page: 6 of 10 prepared by: Tracy EVERLIGHTELECTRONICS CO.,LTD. 67-21B/G6C-BR1S2B/BT Carrier Tape Dimensions: Loaded quantity 500 PCS per reel. Polarity Note: The tolerances unless mentioned is ±0.1mm Unit = mm Moisture Resistant Packaging + Label Everlight Electronics Co., Ltd. Device No. :DSE-67B-056 Aluminum moisture-proof bag Desiccant Label http://www.everlight.com prepared date:29-May-2007 Rev. 1 Page: 7 of 10 prepared by: Tracy EVERLIGHTELECTRONICS CO.,LTD. 67-21B/G6C-BR1S2B/BT Reliability Test Items And Conditions The reliability of products shall be satisfied with items listed below. Confidence level：90% LTPD：10% No. 1 2 Items Reflow Soldering Temperature Cycle Test Condition Temp. : 260℃±5℃ Min. 5sec. H : +100℃ 15min ∫ 5 min L : -40℃ 15min H : +100℃ 5min ∫ 10 sec L : -10℃ 5min Temp. : 100℃ Temp. : -40℃ IF = 20 mA 85℃/ 85%RH Test Sample Hours/Cycles Size 6 Min. 300 Cycles 22 PCS. 22 PCS. Ac/Re 0/1 0/1 3 4 5 6 7 Thermal Shock High Temperature Storage Low Temperature Storage DC Operating Life High Temperature / High Humidity 300 Cycles 1000 Hrs. 1000 Hrs. 1000 Hrs. 1000 Hrs. 22 PCS. 22 PCS. 22 PCS. 22 PCS. 22 PCS. 0/1 0/1 0/1 0/1 0/1 Everlight Electronics Co., Ltd. Device No. :DSE-67B-056 http://www.everlight.com prepared date:29-May-2007 Rev. 1 Page: 8 of 10 prepared by: Tracy EVERLIGHTELECTRONICS CO.,LTD. 67-21B/G6C-BR1S2B/BT Precautions For Use 1. Over-current-proof Customer must apply resistors for protection, otherwise slight voltage shift will cause big current change ( Burn out will happen ). 2. Storage 2.1 Do not open moisture proof bag before the products are ready to use. 2.2 Before opening the package: The LEDs should be kept at 30℃ or less and 90%RH or less. 2.3 After opening the package: The LED's floor life is 1 year under 30℃ or less and 60% RH or less. If unused LEDs remain, it should be stored in moisture proof packages. 2.4 If the moisture absorbent material (silica gel) has faded away or the LEDs have exceeded the storage time, baking treatment should be performed using the following conditions. Baking treatment : 60±5℃ for 24 hours. 3. Soldering Condition 3.1 Pb-free solder temperature profile 1~5 °C / Sec. 260°C. Max. 10 Sec. Max. 1~5 °C / Sec. Pre-heating 180~200°C 60 Sec. Max. Above 220°C 120 Sec. Max. 3.2 Reflow soldering should not be done more than two times. 3.3 When soldering, do not put stress on the LEDs during heating. 3.4 After soldering, do not warp the circuit board. 4.Soldering Iron Each terminal is to go to the tip of soldering iron temperature less than 350℃ for 3 seconds within once in less than the soldering iron capacity 25W. Leave two seconds and more intervals, and do soldering of each terminal. Be careful because the damage of the product is often started at the time of the hand solder. Everlight Electronics Co., Ltd. Device No. :DSE-67B-056 http://www.everlight.com prepared date:29-May-2007 Rev. 1 Page: 9 of 10 prepared by: Tracy EVERLIGHTELECTRONICS CO.,LTD. 67-21B/G6C-BR1S2B/BT 5.Repairing Repair should not be done after the LEDs have been soldered. When repairing is unavoidable, a double-head soldering iron should be used (as below figure). It should be confirmed beforehand whether the characteristics of the LEDs will or will not be damaged by repairing. EVERLIGHT ELECTRONICS CO., LTD. Office: No 25, Lane 76, Sec 3, Chung Yang Rd, Tucheng, Taipei 236, Taiwan, R.O.C Tel: 886-2-2267-2000, 2267-9936 Fax: 886-2267-6244, 2267-6189, 2267-6306 http://www.everlight.com Everlight Electronics Co., Ltd. Device No. :DSE-67B-056 http://www.everlight.com prepared date:29-May-2007 Rev. 1 Page: 10 of 10 prepared by: Tracy