67-21BSYGC-S530-E5-TR8

EVERLIGHTELECTRONICS CO.,LTD. Technical Data Sheet Top View LED With Lens 67-21BSYGC/S530-XX/TR8 Features ․P-LCC-2 package. ․High flux output. ․High current capability. ․White package. ․Optical indicator. ․Colorless clear window. ․Ideal for backlight and light pipe application. ․Inter reflector. ․Suitable for automatic placement equipment. ․Suitable for reflow and wave solder processes. ․Available on tape and reel (12mm Tape). ․Pb-free. Descriptions The 67-21B series is available in soft orange, red and yellow. Due to the package design, the LED has optimized light coupling by inter reflector. This feature makes the 67-21B series LED ideal for light pipe application. The low current requirement makes this device ideal for portable equipment or any other application where power is at a premium. Applications ․Indicator and backlight for audio and video equipment. ․Indicator and backlight in office and family equipment. ․Flat backlight for LCD’s, switches and symbols. ․Light pipe application. ․General use. Device Selection Guide Chip Emitted Color Material AlGaInP Brilliant Yellow Green Water Clear Resin Color Everlight Electronics Co., Ltd. Device No. :DSE-67B-013 http://www.everlight.com prepared date:29-June-2007 Rev. 2 Page: 1 of 9 Prepared by: Ray Yuan EVERLIGHTELECTRONICS CO.,LTD. Technical Data Sheet Top View LED With Lens 67-21BSYGC/S530-XX/TR8 Package Dimensions C L 2.2±0.1 2.9±0.2 + Polarity - C L 3.25±0.2 2.9±0.2 For reflow soldering (propose) Note: The tolerances unless mentioned is ±0.1mm ;Unit = mm Everlight Electronics Co., Ltd. Device No. :DSE-67B-013 http://www.everlight.com prepared date:29-June-2007 Rev. 2 Page: 2 of 9 Prepared by: Ray Yuan EVERLIGHTELECTRONICS CO.,LTD. Technical Data Sheet Top View LED With Lens 67-21BSYGC/S530-XX/TR8 Absolute Maximum Ratings (Ta=25℃) Parameter Reverse Voltage Forward Current Peak Forward Current(Duty 1/10 @ 1KHz) Power Dissipation Electrostatic Discharge Operating Temperature Storage Temperature Soldering Temperature Symbol VR IF IFP Pd ESD Topr Tstg Tsol Rating 5 25 60 60 2000 -40 ~ +85 -40~ +90 Unit V mA mA mW V ℃ ℃ Reflow Soldering : 260 ℃ for 10 sec. Hand Soldering : 350 ℃ for 3 sec. Electronic Optical Characteristics (Ta=25℃) : Parameter Symbol Rank E3 Luminous Intensity Iv E4 E5 Viewing Angle Peak Wavelength Dominant Wavelength Spectrum Radiation Bandwidth Forward Voltage Reverse Current Min. 105 140 175 --------567.5 ----1.7 ----- Typ. ------------60 575 ----20 2.0 ----- Max. 285 450 565 --------577.5 ----2.4 10 Unit Condition mcd IF=20mA 2θ1/2 λp λd △λ VF IR ------------------------- deg nm nm nm V μA IF=20mA IF=20mA IF=20mA IF=20mA IF=20mA VR=5V Everlight Electronics Co., Ltd. Device No. :DSE-67B-013 http://www.everlight.com prepared date:29-June-2007 Rev. 2 Page: 3 of 9 Prepared by: Ray Yuan EVERLIGHTELECTRONICS CO.,LTD. Technical Data Sheet Top View LED With Lens 67-21BSYGC/S530-XX/TR8 Typical Electro-Optical Characteristics Curves Everlight Electronics Co., Ltd. Device No. :DSE-67B-013 http://www.everlight.com prepared date:29-June-2007 Rev. 2 Page: 4 of 9 Prepared by: Ray Yuan EVERLIGHTELECTRONICS CO.,LTD. Technical Data Sheet Top View LED With Lens 67-21BSYGC/S530-XX/TR8 Label explanation CAT: Luminous Intensity Rank HUE: Dom. Wavelength Rank REF: Forward Voltage Rank Reel Dimensions Note: The tolerances unless mentioned is ±0.1mm ,Unit = mm Everlight Electronics Co., Ltd. Device No. :DSE-67B-013 http://www.everlight.com prepared date:29-June-2007 Rev. 2 Page: 5 of 9 Prepared by: Ray Yuan EVERLIGHTELECTRONICS CO.,LTD. Technical Data Sheet Top View LED With Lens 67-21BSYGC/S530-XX/TR8 Carrier Tape Dimensions: Loaded quantity 500 PCS per reel. Moisture Resistant Packaging + Note: The tolerances unless mentioned is ±0.1mm Unit = mm Label Everlight Electronics Co., Ltd. Device No. :DSE-67B-013 Polarity Aluminum moisture-proof bag Desiccant Label http://www.everlight.com prepared date:29-June-2007 Rev. 2 Page: 6 of 9 Prepared by: Ray Yuan EVERLIGHTELECTRONICS CO.,LTD. Technical Data Sheet Top View LED With Lens 67-21BSYGC/S530-XX/TR8 Reliability Test Items And Conditions The reliability of products shall be satisfied with items listed below. Confidence level：90% LTPD：10% No. Items Test Condition Temp. : 260℃±5℃ Min. 5sec. H : +100℃ 15min ∫ 5 min L : -40℃ 15min H : +100℃ 5min ∫ 10 sec L : -10℃ 5min Temp. : 100℃ Test Sample Hours/Cycles Size 6 Min. 22 PCS. Ac/Re 1 Reflow Soldering 0/1 2 Temperature Cycle 300 Cycles 22 PCS. 0/1 3 Thermal Shock High Temperature Storage Low Temperature Storage DC Operating Life High Temperature / High Humidity 300 Cycles 22 PCS. 0/1 4 1000 Hrs. 22 PCS. 0/1 5 Temp. : -40℃ 1000 Hrs. 22 PCS. 0/1 6 IF = 20 mA 1000 Hrs. 22 PCS. 0/1 7 85℃/ 85%RH 1000 Hrs. 22 PCS. 0/1 Everlight Electronics Co., Ltd. Device No. :DSE-67B-013 http://www.everlight.com prepared date:29-June-2007 Rev. 2 Page: 7 of 9 Prepared by: Ray Yuan EVERLIGHTELECTRONICS CO.,LTD. Technical Data Sheet Top View LED With Lens 67-21BSYGC/S530-XX/TR8 Precautions For Use 1. Over-current-proof Customer must apply resistors for protection , otherwise slight voltage shift will cause big current change ( Burn out will happen ). 2. Storage 2.1 Do not open moisture proof bag before the products are ready to use. 2.2 Before opening the package: The LEDs should be kept at 30℃ or less and 90%RH or less. 2.3 After opening the package: The LED's floor life is 1 year under 30℃ or less and 60% RH or less. If unused LEDs remain, it should be stored in moisture proof packages. 2.4 If the moisture absorbent material (silica gel) has faded away or the LEDs have exceeded the storage time, baking treatment should be performed using the following conditions. Baking treatment : 60±5℃ for 24 hours. 3. Soldering Condition 3.1 Pb-free solder temperature profile 1~5 °C / Sec. 260°C. Max. 10 Sec. Max. 1~5 °C / Sec. Pre-heating 180~200°C 60 Sec. Max. Above 220°C 120 Sec. Max. 3.2 Reflow soldering should not be done more than two times. 3.3 When soldering, do not put stress on the LEDs during heating. 3.4 After soldering, do not warp the circuit board. Everlight Electronics Co., Ltd. Device No. :DSE-67B-013 http://www.everlight.com prepared date:29-June-2007 Rev. 2 Page: 8 of 9 Prepared by: Ray Yuan EVERLIGHTELECTRONICS CO.,LTD. Technical Data Sheet Top View LED With Lens 67-21BSYGC/S530-XX/TR8 4.Soldering Iron Each terminal is to go to the tip of soldering iron temperature less than 350℃ for 3 seconds within once in less than the soldering iron capacity 25W. Leave two seconds and more intervals, and do soldering of each terminal. Be careful because the damage of the product is often started at the time of the hand solder. 5.Repairing Repair should not be done after the LEDs have been soldered. When repairing is unavoidable, a double-head soldering iron should be used (as below figure). It should be confirmed beforehand whether the characteristics of the LEDs will or will not be damaged by repairing. EVERLIGHT ELECTRONICS CO., LTD. Office: No 25, Lane 76, Sec 3, Chung Yang Rd, Tucheng, Taipei 236, Taiwan, R.O.C Reliability Test Items And Conditions Tel: 886-2-2267-2000, 2267-9936 Fax: 886-2267-6244, 2267-6189, 2267-6306 http://www.everlight.com Everlight Electronics Co., Ltd. Device No. :DSE-67B-013 http://www.everlight.com prepared date:29-June-2007 Rev. 2 Page: 9 of 9 Prepared by: Ray Yuan