67-21SYGC/S530-E4/TR8

EVERLIGHT ELECTRONICS CO.,LTD. Technical Data Sheet TOP View LEDs 67-21SYGC/S530-XX/TR8 Features ․P-LCC-2 package. ․White package. ․Optical indicator. ․Colorless clear window. ․Wide viewing angle. ․Suitable for vapor-phase reflow, Infrared reflow and wave solder processes. ․Computable with automatic placement equipment. ․Available on tape and reel (8mm Tape). ․Pb-free. ․RoHS refer to SMD C Type test report. ․The product itself will remain within RoHS compliant version. Descriptions ․The 67-21 series is available in soft orange, green,blue and yellow. Due to the package design, the LED has wide viewing angle and optimized light coupling by inter reflector. This feature 、 makes the SMT TOP LED ideal for light pipe application. The low current requirement makes this device ideal for portable equipment or any other application where power is at a premium. Applications ․Automotive: backlighting in dashboard and switch. ․Telecommunication: indicator and backlighting in telephone and fax. ․Flat backlight for LCD, switch and symbol. ․Light pipe application. ․General use. Device Selection Guide Chip Material Emitted Color AlGaInP Brilliant Yellow Green Lens Color Water Clear Everlight Electronics Co., Ltd. http://www.everlight.com Device No. : DSE-671-159 prepared date: 07-29-2005 Rev. 3 Page: 1 of 9 Prepared by: Teresa EVERLIGHT ELECTRONICS CO.,LTD. 67-21SYGC/S530-XX/TR8 Package Dimensions Everlight Electronics Co., Ltd. http://www.everlight.com Device No. : DSE-671-159 prepared date: 07-29-2005 Rev. 3 Page: 2 of 9 Prepared by: Teresa EVERLIGHT ELECTRONICS CO.,LTD. 67-21SYGC/S530-XX/TR8 Absolute Maximum Ratings (Ta=25℃) Parameter Symbol Rating Unit Reverse Voltage VR 5 V Forward Current IF 25 mA Operating Temperature Topr -40 ~ +85 ℃ Storage Temperature Tstg -40 ~ +90 ℃ Electrostatic Discharge ESD 2000 V Power Dissipation Pd 60 mW IFP 60 mA Peak Forward Current (Duty 1/10 @1KHz) Reflow Soldering : 260 ℃ for 10 sec. Soldering Temperature Tsol Hand Soldering : 350 ℃ for 3 sec. Electro-Optical Characteristics (Ta=25℃) Parameter Symbol *Chip Rank E1 E2 E3 E4 Min. Typ. Max. Unit Condition 16 25 32 41 22 37 51 61 ----------------- mcd IF=20mA Luminous Intensity IV Viewing Angle 2θ1/2 ----- ----- 120 ----- deg IF=20mA Peak Wavelength Dominant Wavelength λp ----- ----- 575 ----- nm IF=20mA λd ----- ----- 573 ----- nm IF=20mA △λ ----- ----- 20 ----- nm IF=20mA VF IR --------- --------- 2.0 ----- 2.4 V μA IF=20mA Spectrum Radiation Bandwidth Forward Voltage Reverse Current 10 *67-21SYGC/S530-XX/TR8 Chip Rank Everlight Electronics Co., Ltd. http://www.everlight.com Device No. : DSE-671-159 prepared date: 07-29-2005 Rev. 3 Page: 3 of 9 Prepared by: Teresa VR=5V EVERLIGHT ELECTRONICS CO.,LTD. 67-21SYGC/S530-XX/TR8 Typical Electro-Optical Characteristics Curves Everlight Electronics Co., Ltd. http://www.everlight.com Device No. : DSE-671-159 prepared date: 07-29-2005 Rev. 3 Page: 4 of 9 Prepared by: Teresa EVERLIGHT ELECTRONICS CO.,LTD. 67-21SYGC/S530-XX/TR8 ■ Label explanation CAT: Luminous Intensity Rank HUE: Dom. Wavelength Rank REF: Forward Voltage Rank ■ Reel Dimensions Note: Tolerances Unless Dimension ±0.1mm , Unit = mm Everlight Electronics Co., Ltd. http://www.everlight.com Device No. : DSE-671-159 prepared date: 07-29-2005 Rev. 3 Page: 5 of 9 Prepared by: Teresa EVERLIGHT ELECTRONICS CO.,LTD. 67-21SYGC/S530-XX/TR8 Carrier Tape Dimensions: Loaded quantity 2000 PCS per reel Note: Tolerances Unless Dimension ±0.1mm ,Unit = mm Moisture Resistant Packaging Label Aluminum moisture-proof bag Everlight Electronics Co., Ltd. http://www.everlight.com Device No. : DSE-671-159 prepared date: 07-29-2005 Desiccant Rev. 3 Label Page: 6 of 9 Prepared by: Teresa EVERLIGHT ELECTRONICS CO.,LTD. 67-21SYGC/S530-XX/TR8 Reliability Test Items And Conditions The reliability of products shall be satisfied with items listed below. Confidence level：90% LTPD：10% No. Items 1 Reflow Soldering 2 Temperature Cycle 3 4 5 6 7 Thermal Shock High Temperature Storage Low Temperature Storage DC Operating Life High Temperature / High Humidity Test Sample Ac/Re Hours/Cycles Size Test Condition Temp. : 260℃±5℃ Min. 5sec. H : +100℃ 15min ∫ 5 min L : -40℃ 15min 6 Min. 22 PCS. 0/1 300 Cycles 22 PCS. 0/1 H : +100℃ 5min ∫ 10 sec L : -10℃ 5min 300 Cycles 22 PCS. 0/1 Temp. : 100℃ 1000 Hrs. 22 PCS. 0/1 Temp. : -40℃ 1000 Hrs. 22 PCS. 0/1 IF = 20 mA 1000 Hrs. 22 PCS. 0/1 85℃/ 85%RH 1000 Hrs. 22 PCS. 0/1 67-21SYGC/S530-XX/TR8 Everlight Electronics Co., Ltd. http://www.everlight.com Device No. : DSE-671-159 prepared date: 07-29-2005 Rev. 3 Page: 7 of 9 Prepared by: Teresa EVERLIGHT ELECTRONICS CO.,LTD. Precautions For Use 1. Over-current-proof Customer must apply resistors for protection, otherwise slight voltage shift will cause big current change ( Burn out will happen ). 2. Storage 2.1 Do not open moisture proof bag before the products are ready to use. 2.2 Before opening the package: The LEDs should be kept at 30℃ or less and 90%RH or less. 2.3 After opening the package: The LED's floor life is 1 year under 30 deg C or less and 60% RH or less. If unused LEDs remain, it should be stored in moisture proof packages. 2.4 If the moisture absorbent material (silica gel) has faded away or the LEDs have exceeded the storage time, baking treatment should be performed using the following conditions. Baking treatment : 60±5℃ for 24 hours. 3. Soldering Condition 3.1 Pb-free solder temperature profile 3.2 Reflow soldering should not be done more than two times. 3.3 When soldering, do not put stress on the LEDs during heating. 3.4 After soldering, do not warp the circuit board. 4.Soldering Iron Each terminal is to go to the tip of soldering iron temperature less than 350℃ for 3 seconds within once in less than the soldering iron capacity 25W. Leave two seconds and more intervals, and do soldering of each terminal. Be careful because the damage of the product is often started at the time of the hand solder. Everlight Electronics Co., Ltd. http://www.everlight.com Device No. : DSE-671-159 prepared date: 07-29-2005 Rev. 3 Page: 8 of 9 Prepared by: Teresa EVERLIGHT ELECTRONICS CO.,LTD. 67-21SYGC/S530-XX/TR8 5.Repairing Repair should not be done after the LEDs have been soldered. When repairing is unavoidable, a double-head soldering iron should be used (as below figure). It should be confirmed beforehand whether the characteristics of the LEDs will or will not be damaged by repairing. EVERLIGHT ELECTRONICS CO., LTD. Office: No 25, Lane 76, Sec 3, Chung Yang Rd, Tucheng, Taipei 236, Taiwan, R.O.C Tel: 886-2-2267-2000, 2267-9936 Fax: 886-2267-6244, 2267-6189, 2267-6306 http://www.everlight.com Everlight Electronics Co., Ltd. http://www.everlight.com Device No. : DSE-671-159 prepared date: 07-29-2005 Rev. 3 Page: 9 of 9 Prepared by: Teresa