67-22-G3G3C-B45-2T

Technical Data Sheet Top View LEDs 67-22/G3G3C-B45/2T Features ․P-LCC-4 package ․Optical indicator ․Colorless clear window ․Ideal for backlight and light pipe application ․Inter reflector ․Wide viewing angle ․Suitable for vapor-phase reflow, Infrared reflow and wave solder processes. ․Computable with automatic placement equipment ․Available on tape and reel (8mm Tape) ․Pb-free ․The product itself will remain within RoHS compliant version Descriptions ․The 67-22 series is available in soft orange, green,blue and yellow. Due to the package design, the LED has wide viewing angle and optimized light coupling by inter reflector. This feature makes ideal for light pipe application. The low current requirement makes this device ideal for portable equipment or any other application where power is at a premium. Applications ․Telecommunication: indicator and backlighting in telephone and fax ․Flat backlight for LCD’s, switches and symbols ․Light pipe application ․General use Device Selection Guide Chip Type G3 G3 Everlight Electronics Co., Ltd. Device No.：DSE-0000324 Material GaP GaP Emitted Color Pale Green Pale Green http://www.everlight.com Prepared date：22-Dec-2008 Resin Color Water Clear Rev. 3 Page：1 of 11 Prepared by：Teresa Technical Data Sheet Top View LEDs 67-22/G3G3C-B45/2T Package Dimensions 0.7±0.1 2.2±0.1 2 3.2±0.2 3.5±0.2 2.4±0.1 4 2.8±0.2 1 C L 3 1 2 3 4 YellowChip1 Green Green Red Chip2 0.5±0.1 2.8±0.2 0.15±0.05 0.8±0.1 1.9±0.2 2.7±0.2 For reflow soldering(propose) 0.8±0.1 1.8 1.6 1.8 Note: The tolerance unless mentioned is ±0.1mm. Everlight Electronics Co., Ltd. Device No.：DSE-0000324 http://www.everlight.com Prepared date：22-Dec-2008 0.7 Rev. 3 Page：2 of 11 Prepared by：Teresa 2.2 Technical Data Sheet Top View LEDs 67-22/G3G3C-B45/2T Absolute Maximum Ratings (Ta=25℃) Parameter Reverse Voltage Forward Current Symbol VR G3 IF G3 Peak Forward Current (Duty 1/10 @ 1KHz) G3 IFP G3 G3 Pd G3 Operating Temperature Storage Temperature Soldering Temperature Topr Tstg Tsol -40 ~ +85 -40~ +90 ℃ ℃ 100 mW 60 mA Rating 5 30 Unit V mA Power Dissipation Reflow soldering：260 ℃ for 10 sec. Hand soldering：350 ℃ for 3 sec. Everlight Electronics Co., Ltd. Device No.：DSE-0000324 http://www.everlight.com Prepared date：22-Dec-2008 Rev. 3 Page：3 of 11 Prepared by：Teresa Technical Data Sheet Top View LEDs 67-22/G3G3C-B45/2T Electro-Optical Characteristics (Ta=25℃) Parameter Luminous Intensity Viewing Angle Peak Wavelength Symbol IV G3 G3 Min. 4.5 --------Typ. 10.0 120 565 Max. 36.0 --------Unit mcd deg nm IF =10mA Condition 2θ1/2 λp G3 G3 G3 G3 G3 G3 G3 G3 G3 G3 Dominant Wavelength λd 563.5 ----- 571.5 nm Spectrum Radiation Bandwidth △λ ----- 30 ----- nm Forward Voltage VF 1.7 2.0 2.4 V Reverse Current IR ----- ----- 10 μA VR=5V Notes: 1. Tolerance of Luminous Intensity：±11% 2. Tolerance of Dominant Wavelength：±1nm 3. Tolerance of Forward Voltage：±0.1V Everlight Electronics Co., Ltd. Device No.：DSE-0000324 http://www.everlight.com Prepared date：22-Dec-2008 Rev. 3 Page：4 of 11 Prepared by：Teresa Technical Data Sheet Top View LEDs 67-22/G3G3C-B45/2T Bin Range of Dominant Wavelength Chip Bin Code C13 G3 C14 C15 C16 Notes: 1. Tolerance of Dominant Wavelength: ±1nm Min. 563.5 565.5 567.5 569.5 Max. 565.5 567.5 569.5 571.5 nm IF=10mA Unit Condition Everlight Electronics Co., Ltd. Device No.：DSE-0000324 http://www.everlight.com Prepared date：22-Dec-2008 Rev. 3 Page：5 of 11 Prepared by：Teresa Technical Data Sheet Top View LEDs 67-22/G3G3C-B45/2T Typical Electro-Optical Characteristics Curve Forward Current vs. Forward Voltage Spectrum Distribution Relative Luminous Intensity (%) 100 75 Ta=25°C Forward Current I (mA) F 50 40 30 20 10 0 Ta=25°C 50 25 0 500 600 650 550 Wavelength λ (nm) 700 1.6 1.8 2.0 2.2 2.4 2.6 Forward Voltage V (V) F Relative Luminous Intensity vs. Forward Current Ta=25°C Relative Luminous Intensity (%) 1000 f=1KHz Duty=1/10 Relative Luminous Intensity vs. Ambient Temperature Relative Luminous Intensity (%) 1000 100 100 10 10 1 -60 -40 -20 1 0 20 40 60 80 100 0 10 Ambient Temperature Ta (°C) Forward Current Derating Curve 40 Forward Current IF (mA) 30 1.0 20 10 0 0.9 0.8 0.7 2 1 10 10 Forward Current I F (mA) 3 10 Radiation Diagram 0° 10° Ta=25°C 20° 30° 40° 50° 60° 70° 80° 90° Everlight Electronics Co., Ltd. Device No.：DSE-0000324 http://www.everlight.com Prepared date：22-Dec-2008 Rev. 3 Page：6 of 11 Prepared by：Teresa Technical Data Sheet Top View LEDs 67-22/G3G3C-B45/2T Label Explanation CAT: Luminous Intensity Rank HUE: Dom. Wavelength Rank REF: Forward Voltage Rank Pb EVERLIGHT RoHS CAT : XXX HUE : XXX REF : XXX CPN : P N : XXXXXXXXXXXXX XXXXXXXXXXXXX QTY : XXX LOT NO : XXXXXXXXXX Reference : XXXXXXXX MSL-4 MADE IN TAIWAN Reel Dimensions Note: The tolerance unless mentioned is ±0.1mm. Everlight Electronics Co., Ltd. Device No.：DSE-0000324 http://www.everlight.com Prepared date：22-Dec-2008 Rev. 3 Page：7 of 11 Prepared by：Teresa Technical Data Sheet Top View LEDs 67-22/G3G3C-B45/2T Carrier Tape Dimensions: Loaded Quantity 2000 pcs. Per Reel Note: The tolerance unless mentioned is ±0.1mm. Moisture Resistant Packaging Label Aluminum moistue-proof bag Desiccant Label Everlight Electronics Co., Ltd. Device No.：DSE-0000324 http://www.everlight.com Prepared date：22-Dec-2008 Rev. 3 Page：8 of 11 Prepared by：Teresa Technical Data Sheet Top View LEDs 67-22/G3G3C-B45/2T Reliability Test Items and Conditions The reliability of products shall be satisfied with items listed below. Confidence level：90% LTPD：10% No. 1 2 3 4 5 6 7 Items Reflow Soldering Temperature Cycle Thermal Shock High Temperature Storage Low Temperature Storage DC Operating Life High Temperature / High Humidity Test Condition Temp. : 260℃±5℃Min. 10sec. H : +100℃ 15min ∫ 5 min L : -40℃ 15min H : +100℃ 5min ∫ 10 sec L : -10℃ 5min Temp. : 100℃ Temp. : -40℃ IF = 10 mA 85℃/85%RH. Test Hours/Cycles 6 Min. 300 Cycles 300 Cycles 1000 Hrs. 1000 Hrs. 1000 Hrs. 1000 Hrs. Sample Size 22 PCS. 22 PCS. 22 PCS. 22 PCS. 22 PCS. 22 PCS. 22 PCS. Ac/Re 0/1 0/1 0/1 0/1 0/1 0/1 0/1 Everlight Electronics Co., Ltd. Device No.：DSE-0000324 http://www.everlight.com Prepared date：22-Dec-2008 Rev. 3 Page：9 of 11 Prepared by：Teresa Technical Data Sheet Top View LEDs 67-22/G3G3C-B45/2T Precautions for Use 1. Over-current-proof Customer must apply resistors for protection , otherwise slight voltage shift will cause big current change ( Burn out will happen ). 2. Storage 2.1 Do not open moisture proof bag before the products are ready to use. 2.2 Before opening the package, the LEDs should be kept at 30℃ or less and 90%RH or less. 2.3 After opening the package: The LED's floor life are 72 hours under 30℃ or less and 60% RH or less. If unused LEDs remain, it should be stored in moisture proof packages. 2.4 If the moisture absorbent material (silica gel) has faded away or the LEDs have exceeded the storage time, baking treatment should be performed using the following conditions. Baking treatment : 60±5℃ for 24 hours. 3. Soldering Condition 3.1 Pb-free solder temperature profile 1~5 °C / Sec. 260 °C Max 10 Sec. Max. 1~5 °C / Sec. Pre-heating 180~200°C 60 Sec. Max. Above 220°C 120 Sec. Max. 3.2 Reflow soldering should not be done more than two times. 3.3 When soldering, do not put stress on the LEDs during heating. 3.4 After soldering, do not warp the circuit board. Everlight Electronics Co., Ltd. Device No.：DSE-0000324 http://www.everlight.com Prepared date：22-Dec-2008 Rev. 3 Page：10 of 11 Prepared by：Teresa Technical Data Sheet Top View LEDs 67-22/G3G3C-B45/2T 4. Soldering Iron Each terminal is to go to the tip of soldering iron temperature less than 350℃ for 3 seconds within once in less than the soldering iron capacity 25W. Leave two seconds and more intervals, and do soldering of each terminal. Be careful because the damage of the product is often started at the time of the hand solder. 5. Repairing Repair should not be done after the LEDs have been soldered. When repairing is unavoidable, a double-head soldering iron should be used (as below figure). It should be confirmed beforehand whether the characteristics of the LEDs will or will not be damaged by repairing. EVERLIGHT ELECTRONICS CO., LTD. Office: No 25, Lane 76, Sec 3, Chung Yang Rd, Tucheng, Taipei 236, Taiwan, R.O.C Tel: 886-2-2267-2000, 2267-9936 Fax: 886-2267-6244, 2267-6189, 2267-6306 http://www.everlight.com Everlight Electronics Co., Ltd. Device No.：DSE-0000324 http://www.everlight.com Prepared date：22-Dec-2008 Rev. 3 Page：11 of 11 Prepared by：Teresa