67-22-R6Y2C-B31-2T

EVERLIGHT ELECTRONICS CO., LTD. Technical Data Sheet Top View LEDs 67-22/R6Y2C-B31/2T Features ․P-LCC-4 package ․Optical indicator ․Colorless clear window ․Ideal for backlight and light pipe application ․Inter reflector ․Wide viewing angle ․Suitable for vapor-phase reflow, Infrared reflow and wave solder processes. ․Computable with automatic placement equipment ․Available on tape and reel (8mm Tape) ․Pb-free ․The product itself will remain within RoHS compliant version Descriptions ․The 67-22 series is available in soft orange, green,blue and yellow. Due to the package design, the LED has wide viewing angle and optimized light coupling by inter reflector. This feature makes ideal for light pipe application. The low current requirement makes this device ideal for portable equipment or any other application where power is at a premium. Applications ․Telecommunication: indicator and backlighting in telephone and fax ․Flat backlight for LCD’s, switches and symbols ․Light pipe application ․General use Device Selection Guide Chip Type R6 Y2 Material AlGaInP AlGaInP Emitted Color Brilliant Red Brilliant Yellow Resin Color Water Clear Everlight Electronics Co., Ltd. Device No.：DSE-672-120 http://www.everlight.com Prepared date：31-Jan.-2008 Rev. 1 Page：1 of 12 Prepared by：Rita Shen Revision :1 Release Date:2008-09-20 00:15:58.0 Expired Period: Forever LifecyclePhase: EVERLIGHT ELECTRONICS CO., LTD. Technical Data Sheet Top View LEDs 67-22/R6Y2C-B31/2T Package Dimensions 0.7±0.1 2.2±0.1 2 3.2±0.2 3.5±0.2 2.4±0.1 4 2.8±0.2 1 C L 3 1 2 3 4 Yellow Red 0.5±0.1 2.8±0.2 0.15±0.05 0.8±0.1 1.9±0.2 2.7±0.2 For reflow soldering(propose) 0.8±0.1 1.8 1.6 1.8 Note: The tolerance unless mentioned is ±0.1mm. Everlight Electronics Co., Ltd. Device No.：DSE-672-120 http://www.everlight.com Prepared date：31-Jan.-2008 0.7 Rev. 1 Page：2 of 12 Prepared by：Rita Shen Revision :1 Release Date:2008-09-20 00:15:58.0 Expired Period: Forever LifecyclePhase: 2.2 EVERLIGHT ELECTRONICS CO., LTD. Technical Data Sheet Top View LEDs 67-22/R6Y2C-B31/2T Absolute Maximum Ratings (Ta=25℃) Parameter Reverse Voltage Forward Current IF Y2 R6 Peak Forward Current(Duty 1/10 @ 1KHz) IFP Y2 R6 Power Dissipation Pd Y2 R6 Electrostatic Discharge(HBM) Operating Temperature Storage Temperature Soldering Temperature ESD Y2 Topr Tstg Tsol 2000 -40 ~ +85 -40~ +95 ℃ ℃ 60 2000 V 60 60 mW 25 60 mA Symbol VR R6 Rating 5 25 mA Unit V Reflow soldering：260 ℃ for 10 sec. Hand soldering：350 ℃ for 3 sec. Everlight Electronics Co., Ltd. Device No.：DSE-672-120 http://www.everlight.com Prepared date：31-Jan.-2008 Rev. 1 Page：3 of 12 Prepared by：Rita Shen Revision :1 Release Date:2008-09-20 00:15:58.0 Expired Period: Forever LifecyclePhase: EVERLIGHT ELECTRONICS CO., LTD. Technical Data Sheet Top View LEDs 67-22/R6Y2C-B31/2T Electro-Optical Characteristics (Ta=25℃) Parameter Luminous Intensity Viewing Angle Peak Wavelength Symbol IV R6 Y2 Min. 72 ------------621 586 --------1.75 Typ. ----------120 632 591 --------20 15 ----Max. 285 ------------631 594 --------2.35 Unit mcd deg nm IF=20mA Condition 2θ1/2 λp R6 Y2 R6 Y2 R6 Y2 R6 Y2 R6 Y2 Dominant Wavelength λd nm Spectrum Radiation Bandwidth △λ nm Forward Voltage VF V Reverse Current IR ----- ----- 10 μA VR=5V Notes: 1. Tolerance of Luminous Intensity：±11% 2. Tolerance of Dominant Wavelength：±1nm 3. Tolerance of Forward Voltage：±0.1V Everlight Electronics Co., Ltd. Device No.：DSE-672-120 http://www.everlight.com Prepared date：31-Jan.-2008 Rev. 1 Page：4 of 12 Prepared by：Rita Shen Revision :1 Release Date:2008-09-20 00:15:58.0 Expired Period: Forever LifecyclePhase: EVERLIGHT ELECTRONICS CO., LTD. Technical Data Sheet Top View LEDs 67-22/R6Y2C-B31/2T Bin Range of Luminous Intensity Symbol Bin Code Q1 Q2 R6 R1 R2 S1 S2 Q1 Q2 Y2 R1 R2 S1 S2 Min. 72 90 112 140 180 225 72 90 112 140 180 225 Max. 90 112 140 180 225 285 90 112 140 180 225 285 mcd IF=20mA Unit Condition Bin Range of Dominant Wavelength Symbol R6 Bin Code FF1 FF2 DD1 Y2 DD2 DD3 DD4 Min. 621 626 586 588 590 592 Max. 626 631 588 590 592 594 nm IF=20mA Unit Condition Notes: 1. Tolerance of Luminous Intensity：±11% 2. Tolerance of Dominant Wavelength：±1nm Everlight Electronics Co., Ltd. Device No.：DSE-672-120 http://www.everlight.com Prepared date：31-Jan.-2008 Rev. 1 Page：5 of 12 Prepared by：Rita Shen Revision :1 Release Date:2008-09-20 00:15:58.0 Expired Period: Forever LifecyclePhase: EVERLIGHT ELECTRONICS CO., LTD. Technical Data Sheet Top View LEDs 67-22/R6Y2C-B31/2T Typical Electro-Optical Characteristics Curve (R6) Spectrum Distribution Forward Current IF (mA) 100 75 Ta=25°C 50 40 30 20 10 0 Forward Current vs. Forward Voltage Ta=25°C Relative luminous intensity (%) 50 25 0 550 600 650 700 Wavelength λ (nm) 750 1.4 1.6 1.8 2.0 2.2 2.4 Forward Voltage VF (V) Relative Luminous Intensity vs. Forward Current Relative luminous intensity (%) 1000 f=1KHz Duty=1/10 Relative Luminous Intensity vs. Relative luminous intensity (%) 1000 Ambient Temperature Ta=25°C 100 100 10 10 1 -60 -40 -20 0 20 40 60 80 100 10 10 10 1 10 2 Ambient Temperature Ta (°C) Forward Current Derating Curve Forward Current IF (mA) 40 30 20 10 1.0 0.9 0.8 0.7 0 20 40 60 85 100 Forward Current IF (mA) Radiation Diagram 0° 10° Ta=25°C 20° 30° 40° 50° 60° 70° 80° 90° 0.5 0.3 0.1 0.2 0.4 0.6 Ambient Temperature Ta (°C) Everlight Electronics Co., Ltd. Device No.：DSE-672-120 http://www.everlight.com Prepared date：31-Jan.-2008 Rev. 1 Page：6 of 12 Prepared by：Rita Shen Revision :1 Release Date:2008-09-20 00:15:58.0 Expired Period: Forever LifecyclePhase: EVERLIGHT ELECTRONICS CO., LTD. Technical Data Sheet Top View LEDs 67-22/R6Y2C-B31/2T Typical Electro-Optical Characteristics Curves (Y2) Spectrum Distribution Relative luminous intensity (%) 100 75 Ta=25°C Forward Current I F (mA) 50 40 30 20 10 Forward Current vs. Forward Voltage Ta=25°C 50 25 0 500 550 600 650 Wavelength λ (nm) 700 0 1.2 1.6 2.0 2.4 2.8 3.0 Forward Voltage VF (V) Relative Luminous Intensity vs. Forward Current Ta=25°C Relative luminous intensity (%) 1000 f=1KHz Duty=1/10 Relative Luminous Intensity vs. Ambient Temperature Relative luminous intensity (%) 1000 100 100 10 10 1 -60 -40 -20 1 0 20 40 60 80 100 Ambient Temperature T a (°C) Forward Current Derating Curve 50 Forward Current I (mA) F 40 30 0 10 2 1 10 10 Forward Current I F (mA) Radiation Diagram 0° 10° 3 10 Ta=25°C 20° 30° 1.0 20 10 0 20 40 60 80 100 Ambient Temperature Ta (°C) 0.9 0.8 0.7 0.5 0.3 0.1 0.2 0.4 0.6 40° 50° 60° 70° 80° 90° Everlight Electronics Co., Ltd. Device No.：DSE-672-120 http://www.everlight.com Prepared date：31-Jan.-2008 Rev. 1 Page：7 of 12 Prepared by：Rita Shen Revision :1 Release Date:2008-09-20 00:15:58.0 Expired Period: Forever LifecyclePhase: EVERLIGHT ELECTRONICS CO., LTD. Technical Data Sheet Top View LEDs 67-22/R6Y2C-B31/2T Label Explanation CAT: Luminous Intensity Rank HUE: Dom. Wavelength Rank REF: Forward Voltage Rank Reel Dimensions Note: The tolerance unless mentioned is ±0.1mm. Everlight Electronics Co., Ltd. Device No.：DSE-672-120 http://www.everlight.com Prepared date：31-Jan.-2008 Rev. 1 Page：8 of 12 Prepared by：Rita Shen Revision :1 Release Date:2008-09-20 00:15:58.0 Expired Period: Forever LifecyclePhase: EVERLIGHT ELECTRONICS CO., LTD. Technical Data Sheet Top View LEDs 67-22/R6Y2C-B31/2T Carrier Tape Dimensions: Loaded Quantity 2000 pcs Per Reel Note: The tolerance unless mentioned is ±0.1mm. Moisture Resistant Packaging Label Aluminum moistue-proof bag Desiccant Label Everlight Electronics Co., Ltd. Device No.：DSE-672-120 http://www.everlight.com Prepared date：31-Jan.-2008 Rev. 1 Page：9 of 12 Prepared by：Rita Shen Revision :1 Release Date:2008-09-20 00:15:58.0 Expired Period: Forever LifecyclePhase: EVERLIGHT ELECTRONICS CO., LTD. Technical Data Sheet Top View LEDs 67-22/R6Y2C-B31/2T Reliability Test Items and Conditions The reliability of products shall be satisfied with items listed below. Confidence level：90% LTPD：10% No. 1 2 3 4 5 6 7 Items Reflow Soldering Temperature Cycle Thermal Shock High Temperature Storage Low Temperature Storage DC Operating Life High Temperature / High Humidity Test Condition Temp. : 260℃±5℃Min. 10sec. H : +100℃ 15min ∫ 5 min L : -40℃ 15min H : +100℃ 5min ∫ 10 sec L : -10℃ 5min Temp. : 100℃ Temp. : -40℃ IF = 20 mA 85℃/85%RH. Test Hours/Cycles 6 Min. 300 Cycles 300 Cycles 1000 Hrs. 1000 Hrs. 1000 Hrs. 1000 Hrs. Sample Size 22 PCS. 22 PCS. 22 PCS. 22 PCS. 22 PCS. 22 PCS. 22 PCS. Ac/Re 0/1 0/1 0/1 0/1 0/1 0/1 0/1 Everlight Electronics Co., Ltd. Device No.：DSE-672-120 http://www.everlight.com Prepared date：31-Jan.-2008 Rev. 1 Page：10 of 12 Prepared by：Rita Shen Revision :1 Release Date:2008-09-20 00:15:58.0 Expired Period: Forever LifecyclePhase: EVERLIGHT ELECTRONICS CO., LTD. Technical Data Sheet Top View LEDs 67-22/R6Y2C-B31/2T Precautions for Use 1. Over-current-proof Customer must apply resistors for protection , otherwise slight voltage shift will cause big current change ( Burn out will happen ). 2. Storage 2.1 Do not open moisture proof bag before the products are ready to use. 2.2 Before opening the package, the LEDs should be kept at 30℃ or less and 90%RH or less. 2.3 After opening the package: The LED's floor life is 1 year under 30℃ or less and 60% RH or less. If unused LEDs remain, it should be stored in moisture proof packages. 2.4 If the moisture absorbent material (silica gel) has faded away or the LEDs have exceeded the storage time, baking treatment should be performed using the following conditions. Baking treatment : 60±5℃ for 24 hours. 3. Soldering Condition 3.1 Pb-free solder temperature profile 1~5 °C / Sec. 260 °C Max. 10 Sec. Max. 1~5 °C / Sec. Pre-heating 180~200°C 60 Sec. Max. Above 220°C 120 Sec. Max. 3.2 Reflow soldering should not be done more than two times. 3.3 When soldering, do not put stress on the LEDs during heating. 3.4 After soldering, do not warp the circuit board. Everlight Electronics Co., Ltd. Device No.：DSE-672-120 http://www.everlight.com Prepared date：31-Jan.-2008 Rev. 1 Page：11 of 12 Prepared by：Rita Shen Revision :1 Release Date:2008-09-20 00:15:58.0 Expired Period: Forever LifecyclePhase: EVERLIGHT ELECTRONICS CO., LTD. Technical Data Sheet Top View LEDs 67-22/R6Y2C-B31/2T 4. Soldering Iron Each terminal is to go to the tip of soldering iron temperature less than 350℃ for 3 seconds within once in less than the soldering iron capacity 25W. Leave two seconds and more intervals, and do soldering of each terminal. Be careful because the damage of the product is often started at the time of the hand solder. 5. Repairing Repair should not be done after the LEDs have been soldered. When repairing is unavoidable, a double-head soldering iron should be used (as below figure). It should be confirmed beforehand whether the characteristics of the LEDs will or will not be damaged by repairing. EVERLIGHT ELECTRONICS CO., LTD. Office: No 25, Lane 76, Sec 3, Chung Yang Rd, Tucheng, Taipei 236, Taiwan, R.O.C Tel: 886-2-2267-2000, 2267-9936 Fax: 886-2267-6244, 2267-6189, 2267-6306 http://www.everlight.com Everlight Electronics Co., Ltd. Device No.：DSE-672-120 http://www.everlight.com Prepared date：31-Jan.-2008 Rev. 1 Page：12 of 12 Prepared by：Rita Shen Revision :1 Release Date:2008-09-20 00:15:58.0 Expired Period: Forever LifecyclePhase: