67-23/R6GHBHC-B05/2T

Top view LEDs 67-23/R6GHBHC-B05/2T Features ․P-LCC-4 package. ․White package. ․Optical indicator. ․Colorless clear window. ․Pb-free. ․The product itself will remain within RoHS compliant version. Applications ․Telecommunication: indicator and backlighting in telephone and fax. ․Flat backlight for LCD’s, switches and symbols. ․Light pipe application. ․General use. 1 Copyright © 2010, Everlight All Rights Reserved. Release Date : 25.Nov.2016. Issue No: DSE-0002487 www.everlight.com DATASHEET SMD  REFLECTOR 67-23/R6GHBHC-B05/2T Device Selection Guide Chip Emitted Color Materials R6 GH BH AlGaInP InGaN InGaN Resin Color Brilliant Red Brilliant Green Blue Water clear Absolute Maximum Ratings (Ta=25℃) Parameter Symbol Rating Unit Reverse Voltage VR V Topr 5 25 25 25 100 100 100 120 110 110 2000 150 150 -40 ~ +85 Forward Current IF Peak Forward Current IFP Power Dissipation Pd Electrostatic Discharge(HBM) ESD Operating Temperature Storage Temperature Tstg -40 ~ +90 ℃ Soldering Temperature Tsol 2 R6 GH BH R6 GH BH R6 GH BH R6 GH BH mA mA mW V ℃ Reflow Soldering : 260 ℃ for 10 sec. Hand Soldering : 350 ℃ for 3 sec. Copyright © 2010, Everlight All Rights Reserved. Release Date : 25.Nov.2016. Issue No: DSE-0002487 www.everlight.com DATASHEET SMD  REFLECTOR 67-23/R6GHBHC-B05/2T Electro-Optical Characteristics (Ta=25℃) Parameter Luminous Intensity Symbol IV Viewing Angle Peak Wavelength Dominant Wavelength Spectrum Radiation Bandwidth Forward Voltage Reverse Current Min. Typ. Max. R6 112 ----- 285 GH 180 ----- 715 BH 72 ----- 285 ----- 120 ----- R6 ----- 632 ----- GH ----- 518 ----- BH ----- 468 ----- R6 621 ----- 631 GH 520 ----- 530 BH 465 ----- 475 R6 ----- 20 ----- GH ----- 35 ----- BH ----- 35 ----- R6 ----- 2.0 2.4 GH ----- 3.4 3.95 BH ----- 3.4 3.95 R6 ----- ----- 10 GH ----- ----- 50 BH ----- ----- 50 2θ1/2 λp λd △λ VF IR Unit Condition mcd deg nm nm IF=20mA nm V μA VR=5V Note: 1. Tolerance of Luminous Intensity: ±11% 2. Tolerance of Dominant Wavelength: ±1nm 3. Tolerance of Forward Voltage: ±0.1V 3 Copyright © 2010, Everlight All Rights Reserved. Release Date : 25.Nov.2016. Issue No: DSE-0002487 www.everlight.com DATASHEET SMD  REFLECTOR 67-23/R6GHBHC-B05/2T Bin Range of Luminous Intensity Chip R6 GH BH Bin Min Max R 112 180 S 180 285 S 180 285 T 285 450 U 450 715 Q 72 112 R 112 180 S 180 285 Bin Min Max FF1 621 626 FF2 626 631 X 520 525 Y 525 530 X 465 470 Y 470 475 Unit Condition mcd IF=20mA Unit Condition nm IF=20mA Bin Range of Dominant Wavelength Chip R6 GH BH 1. Tolerance of Luminous Intensity: ±11% 2. Tolerance of Dominant Wavelength: ±1nm 3. Tolerance of Forward Voltage: ±0.1V 4 Copyright © 2010, Everlight All Rights Reserved. Release Date : 25.Nov.2016. Issue No: DSE-0002487 www.everlight.com DATASHEET SMD  REFLECTOR 67-23/R6GHBHC-B05/2T Typical Electro-Optical Characteristics Curves (R6) 5 Copyright © 2010, Everlight All Rights Reserved. Release Date : 25.Nov.2016. Issue No: DSE-0002487 www.everlight.com DATASHEET SMD  REFLECTOR 67-23/R6GHBHC-B05/2T Typical Electro-Optical Characteristics Curves (GH) 6 Copyright © 2010, Everlight All Rights Reserved. Release Date : 25.Nov.2016. Issue No: DSE-0002487 www.everlight.com DATASHEET SMD  REFLECTOR 67-23/R6GHBHC-B05/2T Typical Electro-Optical Characteristics Curves (BH) 7 Copyright © 2010, Everlight All Rights Reserved. Release Date : 25.Nov.2016. Issue No: DSE-0002487 www.everlight.com DATASHEET SMD  REFLECTOR 67-23/R6GHBHC-B05/2T Package Dimension Blue Green Red Note: Tolerances unless mentioned ±0.1mm. Unit = mm 8 Copyright © 2010, Everlight All Rights Reserved. Release Date : 25.Nov.2016. Issue No: DSE-0002487 www.everlight.com DATASHEET SMD  REFLECTOR 67-23/R6GHBHC-B05/2T Moisture Resistant Packing Materials Label Explanation ‧CPN: Customer’s Product Number ‧P/N: Product Number ‧QTY: Packing Quantity ‧CAT: Luminous Intensity Rank ‧HUE: Dom. Wavelength Rank ‧REF: Forward Voltage Rank ‧LOT No: Lot Number Reel Dimensions 9 Copyright © 2010, Everlight All Rights Reserved. Release Date : 25.Nov.2016. Issue No: DSE-0002487 www.everlight.com DATASHEET SMD  REFLECTOR 67-23/R6GHBHC-B05/2T Carrier Tape Dimensions: Loaded Quantity 2000 pcs Per Reel 2 1 + 3 4 Note: Tolerances unless mentioned ±0.1mm. Unit = mm Moisture Resistant Packing Process Note: Tolerances unless mentioned ±0.1mm. Unit = mm 10 Copyright © 2010, Everlight All Rights Reserved. Release Date : 25.Nov.2016. Issue No: DSE-0002487 www.everlight.com DATASHEET SMD  REFLECTOR 67-23/R6GHBHC-B05/2T Reliability Test Items and Conditions The reliability of products shall be satisfied with items listed below. Confidence level：90% LTPD：10% No. Items Test Condition Test Hours/Cycles Sample Size Ac/Re 1 Reflow Soldering Temp. : 260℃±5℃ Max 10 sec. 6 min 22 PCS. 0/1 2 Temperature Cycle H : +100℃ 15min ∫ 5 min L : -40℃ 15min 300 Cycles 22 PCS. 0/1 3 Thermal Shock H : +100℃ 5min ∫ 10 sec L : -10℃ 5min 300 Cycles 22 PCS. 0/1 4 High Temperature Storage Temp. : 100℃ 1000 Hrs. 22 PCS. 0/1 5 Low Temperature Storage Temp. : -40℃ 1000 Hrs. 22 PCS. 0/1 6 DC Operating Life IF = 20 mA 1000 Hrs. 22 PCS. 0/1 7 High Temperature / High Humidity 85℃/85%RH 1000 Hrs. 22 PCS. 0/1 11 Copyright © 2010, Everlight All Rights Reserved. Release Date : 25.Nov.2016. Issue No: DSE-0002487 www.everlight.com DATASHEET SMD  REFLECTOR 67-23/R6GHBHC-B05/2T Precautions for Use 1. Over-current-proof Customer must apply resistors for protection , otherwise slight voltage shift will cause big current change ( Burn out will happen ). 2. Storage 2.1 Do not open moisture proof bag before the products are ready to use. 2.2 Before opening the package, the LEDs should be kept at 30℃ or less and 90%RH or less. 2.3 After opening the package: The LED's floor life are 168 hours under 30℃ or less and 60% RH or less. If unused LEDs remain, it should be stored in moisture proof packages. 2.4 If the moisture absorbent material (silica gel) has faded away or the LEDs have exceeded the storage time, baking treatment should be performed using the following conditions. Baking treatment : 60±5℃ for 24 hours. 3. Soldering Condition 3.1 Pb-free solder temperature profile 260°C Max. 10sec. Max. Above255°C 30sec.Max. 3°C/sec.Max. 6°C/sec.Max. Pre-heating Above 217°C 60~150sec. 150~200°C 60~120sec. 3.2 Reflow soldering should not be done more than two times. 3.3 When soldering, do not put stress on the LEDs during heating. 3.4 After soldering, do not warp the circuit board. 4. Soldering Iron Each terminal is to go to the tip of soldering iron temperature less than 350℃ for 3 seconds within once in less than the soldering iron capacity 25W. Leave two seconds and more intervals, and do soldering of each terminal. Be careful because the damage of the product is often started at the time of the hand solder. 5. Repairing Repair should not be done after the LEDs have been soldered. When repairing is unavoidable, a double-head soldering iron should be used (as below figure). It should be confirmed beforehand whether the characteristics of the LEDs will or will not be damaged by repairing. 12 Copyright © 2010, Everlight All Rights Reserved. Release Date : 25.Nov.2016. Issue No: DSE-0002487 www.everlight.com DATASHEET SMD  REFLECTOR 67-23/R6GHBHC-B05/2T DISCLAIMER 1. EVERLIGHT reserves the right(s) on the adjustment of product material mix for the specification. 2. The product meets EVERLIGHT published specification for a period of twelve (12) months from date of shipment. 3. The graphs shown in this datasheet are representing typical data only and do not show guaranteed values. 4. When using this product, please observe the absolute maximum ratings and the instructions for using outlined in these specification sheets. EVERLIGHT assumes no responsibility for any damage resulting from the use of the product which does not comply with the absolute maximum ratings and the instructions included in these specification sheets. 5. These specification sheets include materials protected under copyright of EVERLIGHT. Reproduction in any form is prohibited without obtaining EVERLIGHT’s prior consent. 6. This product is not intended to be used for military, aircraft, automotive, medical, life sustaining or life saving applications or any other application which can result in human injury or death. Please contact authorized Everlight sales agent for special application request. 13 Copyright © 2010, Everlight All Rights Reserved. Release Date : 25.Nov.2016. Issue No: DSE-0002487 www.everlight.com