67-23/R6GHBHC-B06/2T

Technical Data Sheet Full Color Top View LEDs 67-23/R6GHBHC-B06/2T Features ․P-LCC-4 package. ․White package. ․Optical indicator. ․Colorless clear window. ․Pb free ․The product itself will remain within RoHS compliant version.. Descriptions ․The 67-23 series is available in soft orange, green,blue and yellow. Due to the package design, the LED has wide viewing angle and optimized light coupling by inter reflector. This feature makes the ideal for light pipe application. The low current requirement makes this device ideal for portable equipment or any other application where power is at a premium. Applications ․Telecommunication: indicator and backlighting in telephone and fax. ․Flat backlight for LCD’s, switches and symbols. ․Light pipe application. ․General use. Device Selection Guide Chip Lens Color Type R6 Material AlGaInP Emitted Color Brilliant Red GH InGaN Brilliant Green BH InGaN Blue Water Clear Everlight Electronics Co., Ltd. http://www.everlight.com Rev.1 Page: 1 of 13 Device No : Prepared date:05-Jan-2006 Prepared by: Venis Wu 67-23/R6GHBHC-B06/2T Package Outline Dimensions CL 1 4 2.8±0.2 CL 2 0.7±0.1 2.2±0.1 3 1 2 4 3 3.5±0.2 2.8±0.2 0.15±0.05 0.8±0.1 1.9±0.2 2.4±0.1 0.5±0.1 3.2±0.2 2.7±0.2 For reflow soldering(propose) 1.6 1.8 0.7 1.8 2.2 0.8±0.1 Note: The tolerances unless mentioned is ±0.1mm ;Unit = mm Everlight Electronics Co., Ltd. http://www.everlight.com Rev.1 Page: 2 of 13 Device No : Prepared date:05-Jan-2006 Prepared by: Venis Wu 67-23/R6GHBHC-B06/2T Absolute Maximum Ratings (Ta=25℃) Parameter Symbol Rating Unit Reverse Voltage VR 5 V Forward Current IF R6 25 GH 25 BH 25 mA Operating Temperature Topr -40 ~ +85 ℃ Storage Temperature Tstg -40~ +100 ℃ Electrostatic Discharge(HBM) Power Dissipation Peak Forward Current(Duty 1/10 @ 1KHZ) ESD Pd IFP R6 2000 GH 1000 BH 1000 R6 60 GH 110 BH 110 R6 60 GH 100 BH 100 V mW mA Reflow Soldering : 260 ℃ for 10 sec. Soldering Temperature Tsol Hand Soldering : 350 ℃ for 3 sec. Everlight Electronics Co., Ltd. http://www.everlight.com Rev.1 Page: 3 of 13 Device No : Prepared date:05-Jan-2006 Prepared by: Venis Wu 67-23/R6GHBHC-B06/2T Electro-Optical Characteristics (Ta=25℃) Parameter Symbol Luminous Intensity IV λp Peak Wavelength λd Dominant Wavelength Spectrum Radiation Bandwidth △λ Forward Voltage Viewing Angle Reverse Current VF R6 GH BH R6 GH BH R6 GH BH R6 GH BH R6 GH BH 2θ1/2 IR R6 GH BH Min. Typ. Max 180 ----- 360 285 ----- 565 90 ----- 180 ----- 632 ----- ----- 518 ----- ----- 468 ----- 621 ----- 626 520 ----- 525 470 ----- 475 ----- 20 ----- ----- 35 ----- ----- 35 ----- 1.75 ----- 2.35 2.9 ----- 3.5 2.9 ----- 3.5 ----- 120 ----- ----- ----- 10 ----- ----- 50 ----- ----- 50 Unit Condition mcd *IF=20mA nm IF=20mA nm IF=20mA nm IF=20mA V IF=20mA deg IF=20mA μA VR=5V *For each die Notes: 1.Tolerance of Luminous Intensity ±11% 2.Tolerance of Dominant Wavelength ±1nm 3.Tolerance of Forward Voltage ±0.1V Everlight Electronics Co., Ltd. http://www.everlight.com Rev.1 Page: 4 of 13 Device No : Prepared date:05-Jan-2006 Prepared by: Venis Wu 67-23/R6GHBHC-B06/2T Bin Range Of Luminous Intensity Chip Bin R6 GH BH S1 S2 T1 T1 T2 U1 Q2 R1 R2 Min Max Unit Condition 180 225 285 285 360 450 90 112 140 225 285 360 360 450 565 112 140 180 mcd IF=20mA Min 1.75 1.95 2.15 2.90 3.10 3.30 2.90 3.10 3.30 Max 1.95 2.15 2.35 3.10 3.30 3.50 3.10 3.30 3.50 Unit Condition V IF=20mA Bin Range Of Forward Voltage Chip R6 GH BH Bin 0 1 2 11 12 13 11 12 13 Notes: 1.Tolerance of Luminous Intensity ±11% 2.Tolerance of Forward Voltage ±0.1V Everlight Electronics Co., Ltd. http://www.everlight.com Rev.1 Page: 5 of 13 Device No : Prepared date:05-Jan-2006 Prepared by: Venis Wu 67-23/R6GHBHC-B06/2T Typical Electro-Optical Characteristics Curves (R6) Everlight Electronics Co., Ltd. http://www.everlight.com Rev.1 Page: 6 of 13 Device No : Prepared date:05-Jan-2006 Prepared by: Venis Wu 67-23/R6GHBHC-B06/2T Typical Electro-Optical Characteristics Curves (GH) Everlight Electronics Co., Ltd. http://www.everlight.com Rev.1 Page: 7 of 13 Device No : Prepared date:05-Jan-2006 Prepared by: Venis Wu 67-23/R6GHBHC-B06/2T Typical Electro-Optical Characteristics Curves (BH) Everlight Electronics Co., Ltd. http://www.everlight.com Rev.1 Page: 8 of 13 Device No : Prepared date:05-Jan-2006 Prepared by: Venis Wu 67-23/R6GHBHC-B06/2T Label Explanation CAT: Luminous Intensity Rank HUE: Dom. Wavelength Rank REF: Forward Voltage Rank Reel Dimensions Note: The tolerances unless mentioned is ±0.1mm,Unit = mm Everlight Electronics Co., Ltd. http://www.everlight.com Rev.1 Page: 9 of 13 Device No : Prepared date:05-Jan-2006 Prepared by: Venis Wu 67-23/R6GHBHC-B06/2T Carrier Tape Dimensions: Loaded quantity 2000 PCS per reel. Note: Tolerances Unless Dimension ±0.1mm Unit = mm Moisture Resistant Packaging Label Aluminum moisture-proof bag Desiccant Label Everlight Electronics Co., Ltd. http://www.everlight.com Rev.1 Page: 10 of 13 Device No : Prepared date:05-Jan-2006 Prepared by: Venis Wu 67-23/R6GHBHC-B06/2T Reliability Test Items And Conditions The reliability of products shall be satisfied with items listed below. Confidence level：90% LTPD：10% No. Items 1 Reflow Soldering 2 Temperature Cycle 3 Thermal Shock High Temperature Storage Low Temperature Storage 4 5 Test Condition Temp. : 260℃±5℃ Min. 5sec. H : +100℃ 15min ∫ 5 min L : -40℃ 15min Test Sample Ac/Re Hours/Cycles Size 6 min 22 PCS. 0/1 300 Cycles 22 PCS. 0/1 H : +100℃ 5min ∫ 10 sec L : -10℃ 5min 300 Cycles 22 PCS. 0/1 Temp. : 100℃ 1000 Hrs. 22 PCS. 0/1 Temp. : -40℃ 1000 Hrs. 22 PCS. 0/1 6 DC Operating Life IF = 20 mA 1000 Hrs. 22 PCS. 0/1 7 High Temperature / High Humidity 85℃/ 85%RH 1000 Hrs. 22 PCS. 0/1 Everlight Electronics Co., Ltd. http://www.everlight.com Rev.1 Page: 11 of 13 Device No : Prepared date:05-Jan-2006 Prepared by: Venis Wu 67-23/R6GHBHC-B06/2T Precautions For Use 1. Over-current-proof Customer must apply resistors for protection, otherwise slight voltage shift will cause big current change ( Burn out will happen ). 2. Storage 2.1 Do not open moisture proof bag before the products are ready to use. 2.2 Before opening the package: The LEDs should be kept at 30℃ or less and 90%RH or less. 2.3 After opening the package: The LED's floor life are 72 hours under 30℃ or less and 60% RH or less.If unused LEDs remain, it should be stored in moisture proof packages. 2.4 If the moisture absorbent material (silica gel) has faded away or the LEDs have exceeded the storage time, baking treatment should be performed using the following conditions. Baking treatment : 60±5℃ for 24 hours. 3. Soldering Condition 3.1 Pb-free solder temperature profile 3.2 Reflow soldering should not be done more than two times. 3.3 When soldering, do not put stress on the LEDs during heating. 3.4 After soldering, do not warp the circuit board. 4.Soldering Iron Each terminal is to go to the tip of soldering iron temperature less than 350℃ for 3 seconds within once in less than the soldering iron capacity 25W. Leave two seconds and more intervals, and do soldering of each terminal. Be careful because the damage of the product is often started at the time of the hand solder. Everlight Electronics Co., Ltd. http://www.everlight.com Rev.1 Page: 12 of 13 Device No : Prepared date:05-Jan-2006 Prepared by: Venis Wu 67-23/R6GHBHC-B06/2T 5.Repairing Repair should not be done after the LEDs have been soldered. When repairing is unavoidable, a double-head soldering iron should be used (as below figure). It should be confirmed beforehand whether the characteristics of the LEDs will or will not be damaged by repairing. b EVERLIGHT ELECTRONICS CO., LTD. Office: No 25, Lane 76, Sec 3, Chung Yang Rd, Tucheng, Taipei 236, Taiwan, R.O.C Tel: 886-2-2267-2000, 2267-9936 Fax: 886-2267-6244, 2267-6189, 2267-6306 http://www.everlight.com Everlight Electronics Co., Ltd. http://www.everlight.com Rev.1 Page: 13 of 13 Device No : Prepared date:05-Jan-2006 Prepared by: Venis Wu