67-31A/T7C-AAW1X1MZ3/2T

EVERLIGHT ELECTRONICS CO.,LTD. Technical Data Sheet Top View LEDs 67-31A/T7C-AAW1X1MZ3/2T Features ․P-LCC-3 package. ․High flux output. ․High current capability. ․White package. ․Optical indicator. ․Colorless clear window. ․Ideal for backlight and light pipe application. ․Inter reflector. ․Wide viewing angle. ․Suitable for automatic placement equipment. ․Suitable for reflow and wave solder processes. ․Available on tape and reel (8mm Tape). ․Pb-free. ․The product itself will remain within RoHS compliant version. Descriptions ․The 67-31A series is available in soft orange, red and yellow. Due to the package design, the LED has wide viewing angle and optimized light coupling by inter reflector. ․This feature makes the ideal for light pipe application. The low current requirement makes this device ideal for portable equipment or any other application where power is at a premium. Applications ․Indicator and backlight for audio and video equipment. ․Indicator and backlight in office and family equipment. ․Flat backlight for LCD’s, switches and symbols. ․Light pipe application. ․General use. Device Selection Guide Chip Emitted Color Resin Color Pure White Water Clear Material InGaN Everlight Electronics Co., Ltd. http://www.everlight.com Rev.1 Page: 1 of 11 Device No. : DSE-0000743 Prepared date:02-Feb-2008 Prepared by:Teresa EVERLIGHT ELECTRONICS CO.,LTD. Technical Data Sheet Top View LEDs 67-31A/T7C-AAW1X1MZ3/2T Package Dimensions Polarity Recommended solding pad design Note: The tolerances unless mentioned is ±0.1mm ;Unit = mm Everlight Electronics Co., Ltd. http://www.everlight.com Rev.1 Page: 2 of 11 Device No. : DSE-0000743 Prepared date:02-Feb-2008 Prepared by:Teresa EVERLIGHT ELECTRONICS CO.,LTD. Technical Data Sheet Top View LEDs 67-31A/T7C-AAW1X1MZ3/2T Absolute Maximum Ratings (TA=25℃) Parameter Symbol Rating Unit Reverse Voltage VR 5 V Forward Current IF 30 mA Peak Forward Current (Duty 1/10 @1KHz) IFP 100 mA Power Dissipation Pd 110 mW Electrostatic Discharge(HBM) ESD 1000 V Operating Temperature Topr -40 ~ +85 ℃ Storage Temperature Tstg -40 ~ +90 ℃ Soldering Temperature Tsol Reflow Soldering : 260 ℃ for 10 sec. Hand Soldering : 350 ℃ for 3 sec. Electronic Optical Characteristics (TA=25℃) Parameter Symbol Min. Typ. Max. Unit Condition Luminous Intensity Iv 1120 ----- 2250 mcd IF=30mA Viewing Angle 2θ1/2 ----- 120 ----- deg IF=30mA Forward Voltage VF 2.75 ----- 3.95 V IF=30mA Reverse Current IR ----- ----- 50 μA VR=5V Notes: 1.Tolerance of Luminous Intensity : ±11% 2.Tolerance of Forward Voltage : ±0.1V Everlight Electronics Co., Ltd. http://www.everlight.com Rev.1 Page: 3 of 11 Device No. : DSE-0000743 Prepared date:02-Feb-2008 Prepared by:Teresa EVERLIGHT ELECTRONICS CO.,LTD. Technical Data Sheet Top View LEDs 67-31A/T7C-AAW1X1MZ3/2T Bin Range of Luminous Intensity Bin Min. Max. W1 1120 1420 W2 1420 1800 X1 1800 2250 Unit Condition mcd IF=30mA Unit Condition V IF=30mA Bin Range of Forward Voltage Bin Min. Max. 5 2.75 3.05 6 3.05 3.35 7 3.35 3.65 8 3.65 3.95 Notes: 1.Tolerance of Luminous Intensity : ±11% 2.Tolerance of Forward Voltage : ±0.1V Everlight Electronics Co., Ltd. http://www.everlight.com Rev.1 Page: 4 of 11 Device No. : DSE-0000743 Prepared date:02-Feb-2008 Prepared by:Teresa EVERLIGHT ELECTRONICS CO.,LTD. Technical Data Sheet Top View LEDs 67-31A/T7C-AAW1X1MZ3/2T Bin Range of Chromaticity Coordinates Specifications Group Bin Code 5K 6K AA 7K CIE_x CIE_y 0.2960 0.2910 0.2590 0.2680 0.3100 0.2970 0.3130 0.3130 0.3100 0.2840 0.2840 0.2970 0.3300 0.3300 0.3300 Bin Code CIE_x CIE_y 0.2910 0.2850 0.2680 0.2790 0.3070 0.3120 0.3100 0.3100 0.3070 0.2970 0.2970 0.3120 0.3300 0.3470 0.3100 0.3300 0.3300 0.3300 0.3100 0.3300 0.3300 0.3300 0.3300 0.3300 0.3470 0.3380 0.3420 0.3470 0.3710 0.3450 0.3450 0.3470 0.3670 0.3640 0.3520 0.3520 0.3710 0.4010 0.3800 5L 6L 7L 0.3520 0.3440 0.3520 0.3440 0.3380 0.3420 8K 0.3640 0.3800 0.3600 0.3570 Note: Tolerance of Chromaticity Coordinates: ±0.01 8L The C.I.E. 1931 Chromaticity Diagram 0.40 0.38 8L 0.36 8K 7L Y 0.34 7K 6L 0.32 6K 0.30 5L 0.28 5K 0.26 0.28 0.29 0.30 0.31 0.32 0.33 0.34 0.35 0.36 0.37 X Everlight Electronics Co., Ltd. http://www.everlight.com Rev.1 Page: 5 of 11 Device No. : DSE-0000743 Prepared date:02-Feb-2008 Prepared by:Teresa EVERLIGHT ELECTRONICS CO.,LTD. Technical Data Sheet Top View LEDs 67-31A/T7C-AAW1X1MZ3/2T Forward Current vs. Forward Voltage Ta=25°C 100 Forward Current IF (mA) Relative luminous intensity (%) Spectrum Distribution 75 50 25 0 400 500 600 40 30 20 10 0 2.4 800 700 2.6 Wavelength λ (nm) Relative luminous intensity (%) Relative luminous intensity (%) 3.4 3.2 Forward Current 100 10 0 20 40 60 80 100 1000 Ta=25°C f=1KHz Duty=1/10 100 10 1 0 10 10 1 10 2 Forward Current IF (mA) Ambient Temperature Ta (°C) Radiation Diagram 0° 10° Forward Current Derating Curve Forward Current IF (mA) 3.0 Relative Luminous Intensity vs. Ambient Temperature 1 -60 -40 -20 2.8 Forward Voltage VF (V) Relative Luminous Intensity vs. 1000 Ta=25°C 50 50 Ta=25°C 20° 30° 40 20 10 0 40° 1.0 30 0.9 50° 0.8 60° 70° 0.7 0 20 40 60 85 100 Ambient Temperature Ta (°C) 80° 90° 0.5 0.3 0.1 0.2 0.4 0.6 Everlight Electronics Co., Ltd. http://www.everlight.com Rev.1 Page: 6 of 11 Device No. : DSE-0000743 Prepared date:02-Feb-2008 Prepared by:Teresa EVERLIGHT ELECTRONICS CO.,LTD. Technical Data Sheet Top View LEDs 67-31A/T7C-AAW1X1MZ3/2T Label Explanation CAT: Luminous Intensity Rank HUE: Chromaticity Coordinates REF: Forward Voltage Rank Reel Dimensions Note: The tolerances unless mentioned is : ±0.1mm,Unit = mm Everlight Electronics Co., Ltd. http://www.everlight.com Rev.1 Page: 7 of 11 Device No. : DSE-0000743 Prepared date:02-Feb-2008 Prepared by:Teresa EVERLIGHT ELECTRONICS CO.,LTD. Technical Data Sheet Top View LEDs 67-31A/T7C-AAW1X1MZ3/2T Carrier Tape Dimensions; Loaded Quantity 2000 pcs Per Reel Note: The tolerances unless mentioned is : ±0.1mm,Unit = mm Moisture Resistant Packaging Label Aluminum moisture-proof bag Desiccant Label Everlight Electronics Co., Ltd. http://www.everlight.com Rev.1 Page: 8 of 11 Device No. : DSE-0000743 Prepared date:02-Feb-2008 Prepared by:Teresa EVERLIGHT ELECTRONICS CO.,LTD. Technical Data Sheet Top View LEDs 67-31A/T7C-AAW1X1MZ3/2T Reliability Test Items And Conditions The reliability of products shall be satisfied with items listed below. Confidence level：90% LTPD：10% No. Items Test Condition Test Hours/Cycles Sample Size Ac/Re 1 Reflow Soldering Temp. : 260℃±5℃ Min. 5 sec. 6 Min. 22 PCS 0/1 2 Temperature Cycle 300 Cycles 22 PCS. 0/1 3 Thermal Shock 300 Cycles 22 PCS. 0/1 4 High Temperature Storage Temp. : 100℃ 1000 Hrs. 22 PCS. 0/1 5 Low Temperature Storage Temp. : -40℃ 1000 Hrs. 22 PCS. 0/1 6 DC Operating Life IF = 30 mA / 25℃ 1000 Hrs. 22 PCS. 0/1 7 High Temperature / High Humidity 85℃/85%RH 1000 Hrs. 22 PCS. 0/1 H : +100℃ 15min ∫ 5 min L : -40℃ 15min H : +100℃ 5min ∫ 10 sec L : -10℃ 5min Everlight Electronics Co., Ltd. http://www.everlight.com Rev.1 Page: 9 of 11 Device No. : DSE-0000743 Prepared date:02-Feb-2008 Prepared by:Teresa EVERLIGHT ELECTRONICS CO.,LTD. Technical Data Sheet Top View LEDs 67-31A/T7C-AAW1X1MZ3/2T Precautions For Use 1. Over-current-proof Customer must apply resistors for protection, otherwise slight voltage shift will cause big current change ( Burn out will happen ). 2. Storage 2.1 Do not open moisture proof bag before the products are ready to use. 2.2 Before opening the package: The LEDs should be kept at 30℃ or less and 90%RH or less. 2.3 After opening the package: The LED's floor life are 168 hours under 30℃ or less and 60% RH or less.If unused LEDs remain, it should be stored in moisture proof packages. 2.4 If the moisture absorbent material (silica gel) has faded away or the LEDs have exceeded the storage time, baking treatment should be performed using the following conditions. Baking treatment : 60±5℃ for 24 hours. 3. Soldering Condition 3.1 Pb-free solder temperature profile 1~5 °C / Sec. 260°C. Max. 10 Sec. Max. 1~5 °C / Sec. Pre-heating 180~200°C 60 Sec. Max. Above 220°C 120 Sec. Max. 3.2 Reflow soldering should not be done more than two times. 3.3 When soldering, do not put stress on the LEDs during heating. 3.4 After soldering, do not warp the circuit board. 4. Soldering Iron Each terminal is to go to the tip of soldering iron temperature less than 350℃ for 3 seconds within once in less than the soldering iron capacity 25W. Leave two seconds and more intervals, and do soldering of each terminal. Be careful because the damage of the product is often started at the time of the hand solder. Everlight Electronics Co., Ltd. http://www.everlight.com Rev.1 Page: 10 of 11 Device No. : DSE-0000743 Prepared date:02-Feb-2008 Prepared by:Teresa EVERLIGHT ELECTRONICS CO.,LTD. Technical Data Sheet Top View LEDs 67-31A/T7C-AAW1X1MZ3/2T 5. Repairing Repair should not be done after the LEDs have been soldered. When repairing is unavoidable, a double-head soldering iron should be used (as below figure). It should be confirmed beforehand whether the characteristics of the LEDs will or will not be damaged by repairing. EVERLIGHT ELECTRONICS CO., LTD. Office: No 25, Lane 76, Sec 3, Chung Yang Rd, Tucheng, Taipei 236, Taiwan, R.O.C Tel: 886-2-2267-2000, 2267-9936 Fax: 886-2267-6244, 2267-6189, 2267-6306 http://www.everlight.com Everlight Electronics Co., Ltd. http://www.everlight.com Rev.1 Page: 11 of 11 Device No. : DSE-0000743 Prepared date:02-Feb-2008 Prepared by:Teresa