67-31A-B7C-AT1U2MZ3-2T

Technical Data Sheet Power Top View LED 67-31A/B7C-AT1U2MZ3/2T Features ˙P-LCC-3 package. ․High flux output. ․High current capability. ․White package. ․Optical indicator. ․Colorless clear window. ․Ideal for backlight and light pipe application. ․Inter reflector. ․Wide viewing angle. ․Suitable for automatic placement equipment. ․Suitable for reflow and wave solder processes. ․Available on tape and reel (8mm Tape). ․Pb-free. ․The product itself will remain within RoHS compliant version. Descriptions ․The 67-31A series is available in soft orange, red and yellow. Due to the package design, the LED has wide viewing angle and optimized light coupling by inter reflector. ․This feature makes the ideal for light pipe application. The low current requirement makes this device ideal for portable equipment or any other application where power is at a premium. Applications ․Indicator and backlight for audio and video equipment. ․Indicator and backlight in office and family equipment. ․Flat backlight for LCD’ switches and symbols. s, ․Light pipe application. ․General use. Device Selection Guide Chip Emitted Color Material InGaN Blue Water Clear Resin Color Everlight Electronics Co., Ltd. Device No. : DSE-0002485 http://www.everlight.com Pepared date:28ep-2009 Rev.1 Page: 1 of 10 Prepared by: Ya_Hui Fang Revision :1 Release Date:2009-09-29 20:31:55.0 Expired Period: Forever LifecyclePhase: Technical Data Sheet Power Top View LED 67-31A/B7C-AT1U2MZ3/2T Package Dimensions Polarity Recommended solding pad design Note: The tolerances unless mentioned is ±0.1mm ;Unit = mm Everlight Electronics Co., Ltd. Device No. : DSE-0002485 http://www.everlight.com Pepared date:28ep-2009 Rev.1 Page: 2 of 10 Prepared by: Ya_Hui Fang Revision :1 Release Date:2009-09-29 20:31:55.0 Expired Period: Forever LifecyclePhase: Technical Data Sheet Power Top View LED 67-31A/B7C-AT1U2MZ3/2T Absolute Maximum Ratings (TA=25℃) Parameter Reverse Voltage Forward Current Peak Forward Current (Duty 1/10 @1KHz) Power Dissipation Electrostatic Discharge(HBM) Operating Temperature Storage Temperature Symbol VR IF IFP Pd ESD Topr Tstg Tsol Rating 5 30 100 110 150 -40 ~ +85 -40 ~ +90 Unit V mA mA mW V ℃ ℃ Soldering Temperature Reflow Soldering : 260 ℃ for 10 sec. Hand Soldering : 350 ℃ for 3 sec. Electronic Optical Characteristics : Parameter Luminous Intensity Viewing Angle Peak Wavelength Dominant Wavelength Symbol IV 2θ1/2 λP λd △λ VF IR Min. 285 --------464.5 ----2.75 ----- Typ. ----120 468 ----35 --------- Max. 715 --------476.5 ----3.95 10 Unit mcd deg nm nm nm V μA Condition IF=30mA IF=30mA IF=30mA IF=30mA IF=30mA IF=30mA VR=5V Spectrum Radiation Bandwidth Forward Voltage Reverse Current Notes: 1.Tolerance of Luminous Intensity ±11% 2.Tolerance of Dominant Wavelength ±1nm 3.Tolerance of Forward Voltage ±0.1V Everlight Electronics Co., Ltd. Device No. : DSE-0002485 http://www.everlight.com Pepared date:28ep-2009 Rev.1 Page: 3 of 10 Prepared by: Ya_Hui Fang Revision :1 Release Date:2009-09-29 20:31:55.0 Expired Period: Forever LifecyclePhase: Technical Data Sheet Power Top View LED 67-31A/B7C-AT1U2MZ3/2T Bin Range of Dominant Wavelengths Group Bin Code A9 A10 A A11 A12 470.5 473.5 473.5 476.5 Min. 464.5 467.5 Max. 467.5 470.5 nm IF=30mA Unit Condition Bin Range of Luminous Intensity Bin T1 T2 U1 U2 Min 285 360 450 565 Max 360 450 mcd 565 715 IF=30mA Unit Condition Bin Range of Forward Voltage Group Bin 5 6 M 7 8 Notes: 1.Tolerance of Luminous Intensity ±11% 2.Tolerance of Dominant Wavelength ±1nm 3.Tolerance of Forward Voltage ±0.1V 3.35 3.65 3.65 3.95 Min 2.75 3.05 Max 3.05 3.35 V IF=30mA Unit Condition Everlight Electronics Co., Ltd. Device No. : DSE-0002485 http://www.everlight.com Pepared date:28ep-2009 Rev.1 Page: 4 of 10 Prepared by: Ya_Hui Fang Revision :1 Release Date:2009-09-29 20:31:55.0 Expired Period: Forever LifecyclePhase: Technical Data Sheet Power Top View LED 67-31A/B7C-AT1U2MZ3/2T Typical Electro-Optical Characteristic Curves Everlight Electronics Co., Ltd. Device No. : DSE-0002485 http://www.everlight.com Pepared date:28ep-2009 Rev.1 Page: 5 of 10 Prepared by: Ya_Hui Fang Revision :1 Release Date:2009-09-29 20:31:55.0 Expired Period: Forever LifecyclePhase: Technical Data Sheet Power Top View LED 67-31A/B7C-AT1U2MZ3/2T Label Explanation CAT: Luminous Intensity Rank HUE: Dom. Wavelength Rank REF: Forward Voltage Rank XXXXXXXXXXXXX QTY : XXX CAT : XXX HUE : XXX REF : XXX Pb EVERLIGHT RoHS CPN : P N : XXXXXXXXXXXXX LOT NO : XXXXXXXXXX Reference : XXXXXXXX MADE IN TAIWAN Reel Dimensions Note: The tolerances unless mentioned is ±0.1mm,Unit = mm Everlight Electronics Co., Ltd. Device No. : DSE-0002485 http://www.everlight.com Pepared date:28ep-2009 Rev.1 Page: 6 of 10 Prepared by: Ya_Hui Fang Revision :1 Release Date:2009-09-29 20:31:55.0 Expired Period: Forever LifecyclePhase: Technical Data Sheet Power Top View LED 67-31A/B7C-AT1U2MZ3/2T Carrier Tape Dimensions; Loaded Quantity 2000 pcs Per Reel Note: Tolerances Unless Dimension ±0.1mm Unit = mm Moisture Resistant Packaging Label Aluminum moisture-proof bag Desiccant Label Everlight Electronics Co., Ltd. Device No. : DSE-0002485 http://www.everlight.com Pepared date:28ep-2009 Rev.1 Page: 7 of 10 Prepared by: Ya_Hui Fang Revision :1 Release Date:2009-09-29 20:31:55.0 Expired Period: Forever LifecyclePhase: Technical Data Sheet Power Top View LED 67-31A/B7C-AT1U2MZ3/2T Reliability Test Items And Conditions The reliability of products shall be satisfied with items listed below. Confidence level：90% LTPD：10% No. Items Test Condition Test Hours/Cycles Sample Size Ac/Re 1 Reflow Soldering Temp. : 260℃±5℃ Min. 5 sec. H : +100℃ 15min ∫ 5 min L : -40℃ 15min H : +100℃ 5min ∫ 10 sec L : -10℃ 5min Temp. : 100℃ 6 Min. 22 PCS 0/1 2 Temperature Cycle 300 Cycles 22 PCS. 0/1 3 Thermal Shock 300 Cycles 22 PCS. 0/1 4 High Temperature Storage 1000 Hrs. 22 PCS. 0/1 5 Low Temperature Storage Temp. : -40℃ 1000 Hrs. 22 PCS. 0/1 6 DC Operating Life IF = 30 mA / 25℃ 1000 Hrs. 22 PCS. 0/1 7 High Temperature / High Humidity 85℃/85%RH 1000 Hrs. 22 PCS. 0/1 Everlight Electronics Co., Ltd. Device No. : DSE-0002485 http://www.everlight.com Pepared date:28ep-2009 Rev.1 Page: 8 of 10 Prepared by: Ya_Hui Fang Revision :1 Release Date:2009-09-29 20:31:55.0 Expired Period: Forever LifecyclePhase: Technical Data Sheet Power Top View LED 67-31A/B7C-AT1U2MZ3/2T Precautions For Use 1. Over-current-proof Customer must apply resistors for protection, otherwise slight voltage shift will cause big current change ( Burn out will happen ). 2. Storage 2.1 Do not open moisture proof bag before the products are ready to use. 2.2 Before opening the package: The LEDs should be kept at 30℃ or less and 90%RH or less. 2.3 After opening the package: The LED's floor life are 168 hours under 30℃ or less and 60% RH or less. If unused LEDs remain, it should be stored in moisture proof packages. 2.4 If the moisture absorbent material (silica gel) has faded away or the LEDs have exceeded the storage time, baking treatment should be performed using the following conditions. Baking treatment : 60±5℃ for 24 hours. 3. Soldering Condition 3.1 Pb-free solder temperature profile 1~5 °C / Sec. 260°C. Max. 10 Sec. Max. 1~5 °C / Sec. Pre-heating 180~200°C 60 Sec. Max. Above 220°C 120 Sec. Max. 3.2 Reflow soldering should not be done more than two times. 3.3 When soldering, do not put stress on the LEDs during heating. 3.4 After soldering, do not warp the circuit board. 4.Soldering Iron Each terminal is to go to the tip of soldering iron temperature less than 350℃ for 3 seconds within once in less than the soldering iron capacity 25W. Leave two seconds and more intervals, and do soldering of each terminal. Be careful because the damage of the product is often started at the time of the hand solder. Everlight Electronics Co., Ltd. Device No. : DSE-0002485 http://www.everlight.com Pepared date:28ep-2009 Rev.1 Page: 9 of 10 Prepared by: Ya_Hui Fang Revision :1 Release Date:2009-09-29 20:31:55.0 Expired Period: Forever LifecyclePhase: Technical Data Sheet Power Top View LED 67-31A/B7C-AT1U2MZ3/2T 5.Repairing Repair should not be done after the LEDs have been soldered. When repairing is unavoidable, a double-head soldering iron should be used (as below figure). It should be confirmed beforehand whether the characteristics of the LEDs will or will not be damaged by repairing. EVERLIGHT ELECTRONICS CO., LTD. Office: No 25, Lane 76, Sec 3, Chung Yang Rd, Tucheng, Taipei 236, Taiwan, R.O.C Tel: 886-2-2267-2000, 2267-9936 Fax: 886-2267-6244, 2267-6189, 2267-6306 http://www.everlight.com Everlight Electronics Co., Ltd. Device No. : DSE-0002485 http://www.everlight.com Pepared date:28ep-2009 Rev.1 Page: 10 of 10 Prepared by: Ya_Hui Fang Revision :1 Release Date:2009-09-29 20:31:55.0 Expired Period: Forever LifecyclePhase: