67-31AUBC-B001-TR8

EVERLIGHT ELECTRONICS CO.,LTD. Technical Data Sheet (Preliminary) Power Top View LED 67-31AUBC/B001/TR8 Features ․P-LCC-3 package. ․High flux output. ․High current capability. ․White package. ․Optical indicator. ․Colorless clear window. ․Ideal for backlight and light pipe application. ․Inter reflector. ․Wide viewing angle. ․Suitable for automatic placement equipment. ․Suitable for reflow and wave solder processes. ․Available on tape and reel (8mm Tape). ․Pb-free. ․The product itself will remain within RoHS compliant version. Descriptions The 67-31A series is available in soft orange, red and yellow. Due to the package design, the LED has wide viewing angle and optimized light coupling by inter reflector. This feature makes the ideal for light pipe application. The low current requirement makes this device ideal for portable equipment or any other application where power is at a premium. Applications ․Indicator and backlight for audio and video equipment. ․Indicator and backlight in office and family equipment. ․Flat backlight for LCD’s, switches and symbols. ․Light pipe application. ․General use. Device Selection Guide Chip Material InGaN/SiC Emitted Color Blue Lens Color Water Clear Everlight Electronics Co., Ltd. Device No. : http://www.everlight.com prepared date:28-Sep-2006 Rev. 2 Page: 1 of 9 Prepared by:Rita Shen EVERLIGHT ELECTRONICS CO.,LTD. 67-31AUBC/B001/TR8 Package Dimensions Note: The tolerances unless mentioned is ±0.1mm ;Unit = mm Everlight Electronics Co., Ltd. Device No. : http://www.everlight.com prepared date:28-Sep-2006 Rev. 2 Page: 2 of 9 Prepared by:Rita Shen EVERLIGHT ELECTRONICS CO.,LTD. 67-31AUBC/B001/TR8 Absolute Maximum Ratings (TA=25℃) Parameter Reverse Voltage Forward Current Peak Forward Current (Duty 1/10 @1KHz) Power Dissipation Junction Temperature Electrostatic Discharge(HBM) Operating Temperature Storage Temperature Soldering Temperature Symbol VR IF IFP Pd Tj ESD Topr Tstg Tsol Rating 5 30 100 120 125 2000 -40 ~ +100 -40~ +110 Unit V mA mA mW ℃ V ℃ ℃ Reflow Soldering : 260 ℃ for 10 sec. Hand Soldering : 350 ℃ for 3 sec. Electronic Optical Characteristics : Parameter Luminous Intensity Viewing Angle Peak Wavelength Dominant Wavelength Symbol Iv 2θ1/2 λP λd △λ VF IR Min. 140 --------463.0 ------------- Typ. ----120 468 ----26 3.7 ----- Max. 285 --------472.0 ----4.0 10 Unit Condition mcd deg nm nm nm V μA IF=30mA IF=30mA IF=30mA IF=30mA IF=30mA IF=30mA VR=5V Spectrum Radiation Bandwidth Forward Voltage Reverse Current Notes: 1.Tolerance of Luminous Intensity ±11% 2.Tolerance of Dominant Wavelength ±1nm Everlight Electronics Co., Ltd. Device No. : http://www.everlight.com prepared date:28-Sep-2006 Rev. 2 Page: 3 of 9 Prepared by:Rita Shen EVERLIGHT ELECTRONICS CO.,LTD. 67-31AUBC/B001/TR8 Bin Range Of Dominant Wavelength Bin Code Min. Max. Unit nm Condition IF=30mA 1 2 463.0 467.5 467.5 472.0 Bin Range Of Luminous Intensity Bin Min Max Unit mcd Condition IF=30mA R2 S1 S2 Notes: 140 180 225 180 225 285 1.Tolerance of Luminous Intensity ±11% 2.Tolerance of Dominant Wavelength ±1nm Everlight Electronics Co., Ltd. Device No. : http://www.everlight.com prepared date:28-Sep-2006 Rev. 2 Page: 4 of 9 Prepared by:Rita Shen EVERLIGHT ELECTRONICS CO.,LTD. 67-31AUBC/B001/TR8 Typical Electro-Optical Characteristics Curves Typical curve of spectral distribution: V(λ)=Standard eye response curve 100 Blue V(λ) Relative Intensity (%) 50 0 400 450 500 550 600 650 700 Wp (nm) Diagram characteristics of radiation : 20 30 40 50 View Angle 60 70 80 90 o o o o o o o o 10 o 0 o 1.0 Relative Intensity 0.8 0.6 0.4 0.2 0 1.0 0.8 0.6 0.4 0.2 0 20 o Relative Intensity 60 40 V iew Angle o o 80 o Everlight Electronics Co., Ltd. Device No. : http://www.everlight.com prepared date:28-Sep-2006 Rev. 2 Page: 5 of 9 Prepared by:Rita Shen EVERLIGHT ELECTRONICS CO.,LTD. 67-31AUBC/B001/TR8 Forward Current vs. Forward Voltage 100 Ta=25℃ Forward Current I F ( mA) 10 1 2.5 2.7 2.9 3.1 3.3 3.5 3.7 3.9 For war d Voltage V F ( V) Forward Current v.s. Ambient Temp. 40 30 IF (mA) 20 10 0 0 20 40 60 80 100 120 T (degree C) Everlight Electronics Co., Ltd. Device No. : http://www.everlight.com prepared date:28-Sep-2006 Rev. 2 Page: 6 of 9 Prepared by:Rita Shen EVERLIGHT ELECTRONICS CO.,LTD. 67-31AUBC/B001/TR8 Label explanation CAT: Luminous Intensity Rank HUE: Dom. Wavelength Rank REF: Forward Voltage Rank RoHS Reel Dimensions Note: The tolerances unless mentioned is ±0.1mm,Unit = mm Everlight Electronics Co., Ltd. Device No. : http://www.everlight.com prepared date:28-Sep-2006 Rev. 2 Page: 7 of 9 Prepared by:Rita Shen EVERLIGHT ELECTRONICS CO.,LTD. 67-31AUBC/B001/TR8 Carrier Tape Dimensions; Loaded quantity per reel 2000 PCS/reel Note: Tolerances Unless Dimension ±0.1mm Unit = mm Moisture Resistant Packaging Label Aluminum moisture-proof bag Desiccant Label Everlight Electronics Co., Ltd. Device No. : http://www.everlight.com prepared date:28-Sep-2006 Rev. 2 Page: 8 of 9 Prepared by:Rita Shen EVERLIGHT ELECTRONICS CO.,LTD. 67-31AUBC/B001/TR8 Precautions For Use 1. Over-current-proof Customer must apply resistors for protection, otherwise slight voltage shift will cause big current change ( Burn out will happen ). 2. Storage 2.1 Do not open moisture proof bag before the products are ready to use. 2.2 Before opening the package: The LEDs should be kept at 30℃ or less and 90%RH or less. 2.3 After opening the package: The LED's floor life is 1 year under 30 deg C or less and 60% RH or less. If unused LEDs remain, it should be stored in moisture proof packages. 2.4 If the moisture absorbent material (silica gel) has faded away or the LEDs have exceeded the storage time, baking treatment should be performed using the following conditions. Baking treatment : 60±5℃ for 24 hours. 3. Soldering Condition 3.1 Pb-free solder temperature profile 1~5 °C / Sec. 260°C. Max. 10 Sec. Max. 1~5 °C / Sec. Pre-heating 180~200°C 60 Sec. Max. Above 220°C B. Recommend soldering pad 120 Sec. Max. 3.2 Reflow soldering should not be done more than two times. 3.3 When soldering, do not put stress on the LEDs during heating. 3.4 After soldering, do not warp the circuit board. 4.Soldering Iron Each terminal is to go to the tip of soldering iron temperature less than 350℃ for 3 seconds within once in less than the soldering iron capacity 25W. Leave two seconds and more intervals, and do soldering of each terminal. Be careful because the damage of the product is often started at the time of the hand solder. Everlight Electronics Co., Ltd. Device No. : http://www.everlight.com prepared date:28-Sep-2006 Rev. 2 Page: 9 of 9 Prepared by:Rita Shen