67-31H/RSC-AZ0Z2B9Z5/BT

EVERLIGHT ELECTRONICS CO., LTD. Technical Data Sheet Power Top View LEDs with Lens 67-31H/RSC-AZ0Z2B9Z5/BT Features ․P-LCC-3 package. ․High flux output. ․High current capability. ․Optical indicator. ․Colorless clear window. ․Ideal for backlight and light pipe application. ․Inter reflector. ․Suitable for automatic placement equipment. ․Suitable for reflow and wave solder processes. ․Available on tape and reel (12mm Tape). ․Pb-free. ․The product itself will remain within RoHS compliant version. Descriptions ․ The 67-31H series is available in soft orange, red and yellow. Due to the package design, the LED has wide viewing angle and optimized light coupling by inter reflector. This feature makes the ideal for light pipe application. The low current requirement makes this device ideal for portable equipment or any other application where power is at a premium. Applications ․Indicator and backlight for audio and video equipment. ․Indicator and backlight in office and family equipment. ․Flat backlight for LCD’s, switches and symbols. ․Light pipe application. ․General use. Device Selection Guide Chip Emitted Color Resin Color Brilliant Red Water Clear Material AlGaInP Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 1 Page: 1 of 11 Device No. : DSE-0000675 Prepared date: 30-Dec-2008 Prepared by:Ruby Yang EVERLIGHT ELECTRONICS CO., LTD. Technical Data Sheet Power Top View LEDs with Lens 67-31H/RSC-AZ0Z2B9Z5/BT Package Dimensions ± ± ± ± Note: Tolerance unless mentioned is ±0.1mm; Unit = mm Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 1 Page: 2 of 11 Device No. : DSE-0000675 Prepared date: 30-Dec-2008 Prepared by:Ruby Yang EVERLIGHT ELECTRONICS CO., LTD. Technical Data Sheet Power Top View LEDs with Lens 67-31H/RSC-AZ0Z2B9Z5/BT Absolute Maximum Ratings (Ta=25℃) Parameter Symbol Rating Unit Reverse Voltage VR 5 V Forward Current IF 50 mA IFP 100 mA Power Dissipation Pd 120 mW Electrostatic Discharge(HBM) ESD 2000 V Operating Temperature Topr -40 ~ +85 ℃ Storage Temperature Tstg -40 ~ +90 ℃ Soldering Temperature Tsol Peak Forward Current (Duty 1/10 @1KHz) Reflow Soldering : 260 ℃ for 10 sec. Hand Soldering : 350 ℃ for 3 sec. Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 1 Page: 3 of 11 Device No. : DSE-0000675 Prepared date: 30-Dec-2008 Prepared by:Ruby Yang EVERLIGHT ELECTRONICS CO., LTD. Technical Data Sheet Power Top View LEDs with Lens 67-31H/RSC-AZ0Z2B9Z5/BT Electronic Optical Characteristics Parameter Symbol Min. Typ. Max. Unit Condition Luminous Intensity Iv 4500 ----- 18000 mcd IF=50mA Viewing Angle 2θ1/2 ----- 30 ----- deg IF=50mA Peak Wavelength λP ----- 632 ----- nm IF=50mA Dominant Wavelength λd 617.5 ----- 633.5 nm IF=50mA Spectrum Radiation Bandwidth △λ ----- 20 ----- nm IF=50mA Forward Voltage VF 2.15 ----- 2.75 V IF=50mA Reverse Current IR ----- ----- 10 µA VR=5V Notes: 1. Tolerance of Luminous Intensity: ±11% 2. Tolerance of Dominant Wavelength: ±1nm 3. Tolerance of Forward Voltage: ±0.1V Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 1 Page: 4 of 11 Device No. : DSE-0000675 Prepared date: 30-Dec-2008 Prepared by:Ruby Yang EVERLIGHT ELECTRONICS CO., LTD. Technical Data Sheet Power Top View LEDs with Lens 67-31H/RSC-AZ0Z2B9Z5/BT Bin Range of Luminous Intensity Bin Code Min. Max. Z0 4500 7200 Z1 7200 11500 Z2 11500 18000 Unit Condition mcd IF=50mA Unit Condition nm IF=50mA Unit Condition V IF=50mA Bin Range of Dominant Wavelengths Bin Code Min. Max. E4 617.5 621.5 E5 621.5 625.5 E6 625.5 629.5 E7 629.5 633.5 Bin Range of Forward Voltage Bin Code Min. Max. 2 2.15 2.35 3 2.35 2.55 4 2.55 2.75 Notes: 1. Tolerance of Luminous Intensity: ±11% 2. Tolerance of Dominant Wavelength: ±1nm 3. Tolerance of Forward Voltage: ±0.1V Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 1 Page: 5 of 11 Device No. : DSE-0000675 Prepared date: 30-Dec-2008 Prepared by:Ruby Yang EVERLIGHT ELECTRONICS CO., LTD. Technical Data Sheet Power Top View LEDs with Lens 67-31H/RSC-AZ0Z2B9Z5/BT Typical Electro-Optical Characteristic Curves Forward Current vs. Forward Voltage Ta=25°C 100 Forward Current IF (mA) Relative luminous intensity (%) Spectrum Distribution 75 50 25 0 500 550 600 650 Wavelength λ (nm) 60 50 40 30 20 700 1.0 1000 2.2 2.6 3.0 100 10 0 20 40 60 80 100 1000 f=1KHz Duty=1/10 100 10 1 0 10 10 1 10 2 Forward Current IF (mA) Ambient Temperature Ta (°C) Radiation Diagram 0° 10° Forward Current Derating Curve Forward Current IF (mA) 1.8 Relative Luminous Intensity vs. Forward Current Ta=25°C Relative luminous intensity (%) Relative luminous intensity (%) 1.4 Forward Voltage VF (V) Relative Luminous Intensity vs. Ambient Temperature 1 -60 -40 -20 Ta=25°C 70 80 Ta=25°C 20° 30° 70 60 40° 50 1.0 40 30 20 10 0 0.9 50° 0.8 60° 70° 0.7 20 40 60 85 100 80° 90° 0.5 0.3 0.1 0.2 0.4 0.6 Ambient Temperature Ta (°C) Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 1 Page: 6 of 11 Device No. : DSE-0000675 Prepared date: 30-Dec-2008 Prepared by:Ruby Yang EVERLIGHT ELECTRONICS CO., LTD. Technical Data Sheet Power Top View LEDs with Lens 67-31H/RSC-AZ0Z2B9Z5/BT Label Explanation (1) CPN：Customer’s Product Number (2) P/N：Product Number (3) QTY：Packing Quantity (4) CAT：Luminous Intensity Rank (5) HUE：Dom. Wavelength Rank (6) REF：Forward Voltage Rank (7) LOT No：Lot Number Reel Dimensions Note： ：Tolerance unless dimension ±0.1mm. Unit = mm Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 1 Page: 7 of 11 Device No. : DSE-0000675 Prepared date: 30-Dec-2008 Prepared by:Ruby Yang EVERLIGHT ELECTRONICS CO., LTD. Technical Data Sheet Power Top View LEDs with Lens 67-31H/RSC-AZ0Z2B9Z5/BT Carrier Tape Dimensions: Loaded Quantity 500 pcs Per Reel + + + - Note： ：Tolerance unless dimension ±0.1mm; Unit = mm Moisture Resistant Packing Label Aluminum moisture-proof bag Desiccant Label Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 1 Page: 8 of 11 Device No. : DSE-0000675 Prepared date: 30-Dec-2008 Prepared by:Ruby Yang EVERLIGHT ELECTRONICS CO., LTD. Technical Data Sheet Power Top View LEDs with Lens 67-31H/RSC-AZ0Z2B9Z5/BT Reliability Test Items and Conditions The reliability of products shall be satisfied with items listed below. Confidence level：90% LTPD：10% No. Items 1 Reflow Soldering Test Condition Test Hours/Cycles Sample Size Ac/Re 6 Min. 22 PCS 0/1 300 Cycles 22 PCS. 0/1 Temp. : 260℃±5℃ Min. 5 sec. H : +100℃ 15min 2 Temperature Cycle ∫ 5 min L : -40℃ 15min H : +100℃ 5min 3 Thermal Shock ∫ 10 sec L : -10℃ 5min 300 Cycles 22 PCS. 0/1 4 High Temperature Storage Temp. : 100℃ 1000 Hrs. 22 PCS. 0/1 5 Low Temperature Storage Temp. : -40℃ 1000 Hrs. 22 PCS. 0/1 6 DC Operating Life IF = 50 mA / 25℃ 1000 Hrs. 22 PCS. 0/1 7 High Temperature / High Humidity 85℃/85%RH 1000 Hrs. 22 PCS. 0/1 Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 1 Page: 9 of 11 Device No. : DSE-0000675 Prepared date: 30-Dec-2008 Prepared by:Ruby Yang EVERLIGHT ELECTRONICS CO., LTD. Technical Data Sheet Power Top View LEDs with Lens 67-31H/RSC-AZ0Z2B9Z5/BT Precautions for Use 1. Over-current-proof Customer must apply resistors for protection, otherwise slight voltage shift will cause big current change ( Burn out will happen ). 2. Storage 2.1 Do not open moisture proof bag before the products are ready to use. 2.2 Before opening the package: The LED should be kept at 30℃ or less and 90%RH or less. 2.3 After opening the package: The LED floor life is 1 year under 30℃ or less and 60% RH or less. If unused LED remain, it should be stored in moisture proof packages. 2.4 If the moisture absorbent material (silica gel) has faded away or the LED have exceeded the storage time, baking treatment should be performed using the following conditions. Baking treatment : 60±5℃ for 24 hours. 3. Soldering Condition 3.1 Pb-free solder temperature profile 1~5 °C / Sec. 260°C. Max. 10 Sec. Max. 1~5 °C / Sec. Pre-heating 180~200°C 60 Sec. Max. Above 220°C 120 Sec. Max. 3.2 Reflow soldering should not be done more than two times. 3.3 When soldering, do not put stress on the LEDs during heating. 3.4 After soldering, do not warp the circuit board. Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 1 Page: 10 of 11 Device No. : DSE-0000675 Prepared date: 30-Dec-2008 Prepared by:Ruby Yang EVERLIGHT ELECTRONICS CO., LTD. Technical Data Sheet Power Top View LEDs with Lens 67-31H/RSC-AZ0Z2B9Z5/BT 4. Soldering Iron Each terminal is to go to the tip of soldering iron temperature less than 350℃ for 3 seconds within once in less than the soldering iron capacity 25W. Leave two seconds and more intervals, and do soldering of each terminal. Be careful because the damage of the product is often started at the time of the hand solder. 5. Repairing Repair should not be done after the LEDs have been soldered. When repairing is unavoidable, a double-head soldering iron should be used. It should be confirmed beforehand whether the characteristics of the LEDs will or will not be damaged by repairing. EVERLIGHT ELECTRONICS CO., LTD. Office: No 25, Lane 76, Sec 3, Chung Yang Rd, Tucheng, Taipei 236, Taiwan, R.O.C Tel: 886-2-2267-2000, 2267-9936 Fax: 886-2267-6244, 2267-6189, 2267-6306 http://www.everlight.com Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 1 Page: 11 of 11 Device No. : DSE-0000675 Prepared date: 30-Dec-2008 Prepared by:Ruby Yang