7343-G1C2-ASVA

EVERLIGHT ELECTRONICS CO.,LTD. Technical Data Sheet 7343/G1C2-ASVA/MS Features ˙Popular T-1 3/4 diameter package. ˙Choice of various viewing angles. ˙Available on tape and reel. ˙Reliable and robust. ˙The product itself will remain within RoHS compliant version. Descriptions ˙The series is specially designed for applications requiring higher brightness. ˙The LED lamps are available with different colors, intensities, epoxy colors, etc. ˙Superior performance in outdoor environment Applications ˙Color Graphic Signs ˙Message boards ˙Variable message signs (VMS) ˙Commercial outdoor advertising Device Selection Guide LED Part No. 7343/G1C2-ASVA/MS 7343/G1C2-ASVA/P/MS Chip Material InGaN InGaN Emitted Color Brilliant Green Brilliant Green Lens Color Water Clear Water Clear Stopper No Yes Everlight Electronics Co., Ltd. Device Number : DLE-734-118 http\\:www.everlight.com Prepared date:06-09-2006 Rev :1 Page: 1 of 7 Prepared : Grace shen EVERLIGHT ELECTRONICS CO.,LTD. Technical Data Sheet 7343/G1C2-ASVA/MS Package Dimensions No Stopper type Stopper type Notes: ˙All dimensions are in millimeters, tolerance is 0.25mm except being specified. ˙Lead spacing is measured where the lead emerges from the package. ˙Protruded resin under flange is 1.5mm Max LED. Everlight Electronics Co., Ltd. Device Number : DLE-734-118 http\\:www.everlight.com Prepared date:06-09-2006 Rev :1 Page: 2 of 7 Prepared : Grace shen EVERLIGHT ELECTRONICS CO.,LTD. Technical Data Sheet 7343/G1C2-ASVA/MS Absolute Maximum Ratings (Ta=25℃) Parameter Forward Current Pulse Forward Current*1 Operating Temperature Storage Temperature Electrostatic Discharge Soldering Temperature*2 Power Dissipation Reverse Voltage *2:Soldering time≦5 seconds. Symbol IF IFP Topr Tstg ESD Tsol Pd VR Rating 30 100 -40 ~ +85 -40 ~ +100 1K 260 ±5 120 5 Units mA mA ℃ ℃ V ℃ mW V Notes: *1:IFP Conditions--Pulse Width≦10msec and Duty≦1/10. Electro-Optical Characteristics (Ta=25℃) Parameter Forward Voltage Luminous Intensity Viewing Angle Peak Wavelength Dominant Wavelength Spectrum Radiation Bandwidth Reverse Current Symbol VF IV 2θ1/2 λp λd Δλ IR Condition IF=20mA IF=20mA IF=20mA IF=20mA IF=20mA IF=20mA VR=5V Min. 2.8 5650 --520 --Typ. 3.2 9000 25 518 525 35 -Max. 3.6 14250 --532 -50 Units V mcd deg nm nm nm μA Everlight Electronics Co., Ltd. Device Number : DLE-734-118 http\\:www.everlight.com Prepared date:06-09-2006 Rev :1 Page: 3 of 7 Prepared : Grace shen EVERLIGHT ELECTRONICS CO.,LTD. Technical Data Sheet 7343/G1C2-ASVA/MS Rank Combination (IF=20mA) Rank Luminous Intensity S 5650~7150 ± T 7150~9000 15% U 9000~11250 V 11250~14250 Unit: :mcd *Measurement Uncertainty of Luminous Intensity: Rank Forward Voltage 0 2.8~3.0 ± 0.1V 1 3.0~3.2 2 3.2~3.4 3 3.4~3.6 Unit:V *Measurement Uncertainty of Forward Voltage: Rank Dominant Wavelength 1 ± 2 Unit:nm 525~530 530~535 *Measurement Uncertainty of Dominant Wavelength 1.0nm *The quantity ratio of the ranks is decided by EVERLIGHT. Everlight Electronics Co., Ltd. Device Number : DLE-734-118 http\\:www.everlight.com Prepared date:06-09-2006 Rev :1 Page: 4 of 7 Prepared : Grace shen EVERLIGHT ELECTRONICS CO.,LTD. Technical Data Sheet 7343/G1C2-ASVA/MS Typical Electro-Optical Characteristics Curves Everlight Electronics Co., Ltd. Device Number : DLE-734-118 http\\:www.everlight.com Prepared date:06-09-2006 Rev :1 Page: 5 of 7 Prepared : Grace shen EVERLIGHT ELECTRONICS CO.,LTD. Technical Data Sheet 7343/G1C2-ASVA/MS Packing Quantity Specification 1.500PCS/1Bag，5Bags/1Box 2.10Boxes/1Carton Label Form Specification EVERLIGHT CPN: P/N: 7343/G1C2-ASVA/MS QTY： LOT NO： CPN: Customer’s Production Number P/N : Production Number QTY: Packing Quantity CAT: Ranks of Luminous Intensity and Forward Voltage HUE: Ranks of Dominant Wavelength REF: Reference CAT: HUE: REF: LOT No: Lot Number MADE IN TAIWAN: Production Place MADE IN TAIWAN Everlight Electronics Co., Ltd. Device Number : DLE-734-118 http\\:www.everlight.com Prepared date:06-09-2006 Rev :1 Page: 6 of 7 Prepared : Grace shen EVERLIGHT ELECTRONICS CO.,LTD. Technical Data Sheet 7343/G1C2-ASVA/MS Notes 1. Above specification may be changed without notice. EVERLIGHT will reserve authority on material change for above specification. 2. When using this product, please observe the absolute maximum ratings and the instructions for using outlined in these specification sheets. EVERLIGHT assumes no responsibility for any damage resulting from use of the product which does not comply with the absolute maximum ratings and the instructions included in these specification sheets. 3. These specification sheets include materials protected under copyright of EVERLIGHT corporation. Please don’t reproduce or cause anyone to reproduce them without EVERLIGHT’s consent. 4. Soldering Condition Careful attention should be paid during soldering. When soldering, leave more then 3mm from solder joint to case, and soldering beyond the base of the tie bar is recommended. Avoiding applying any stress to the lead frame while the LEDs are at high temperature particularly when soldering. Recommended soldering conditions: Hand Soldering Temp. at tip of iron Soldering time Distance 400℃ Max. (30W Max.) 3 sec Max. 3mm Min.(From solder joint to case) Preheat temp. Bath temp. Bath time. Distance DIP Soldering 100℃ Max. (60 sec Max.) 265 Max. 5 sec Max. 3mm Min. EVERLIGHT ELECTRONICS CO., LTD. Office: No 25, Lane 76, Sec 3, Chung Yang Rd, Tucheng, Taipei 236, Taiwan, R.O.C Tel: 886-2-2267-2000, 2267-9936 Fax: 886-2267-6244, 2267-6189, 2267-6306 http:\\www.everlight.com Everlight Electronics Co., Ltd. Device Number : DLE-734-118 http\\:www.everlight.com Prepared date:06-09-2006 Rev :1 Page: 7 of 7 Prepared : Grace shen