7344-15UTC/S400-X9

LAMP 7344-15UTC/S400-X9 Features •Popular 5mm package •High luminous power •Typical chromaticity coordinates x=0.29, y=0.30 according to CIE1931 •Bulk, available taped on reel. •ESD-withstand voltage: up to 150V •The product itself will remain within RoHS compliant version Description •The series is designed for application required high luminous intensity. •The phosphor filled in the reflector converts the blue emission of InGaN chip to ideal white. Applications •Message panels •Optical Indicators •Backlighting •Marker Lights 1 Revision Copyright :1 © LifecyclePhase: 2010, Everlight All Rights Reserved. Release Date : MAY。2，2012. Issue No: DLE-0004704 _Rev.1 Release Date:2012-05-08 01:49:33.0 www.everlight.com Expired Period: Forever DATASHEET LAMP 7344-15UTC/S400-X9 YE Device Selection Guide Chip Emitted Color Materials InGaN Resin Color Water clear White Absolute Maximum Ratings (Ta=25℃) Parameter Symbol Rating Unit Continuous Forward Current IF 30 mA Peak Forward Current (Duty 1/10 @ 1KHZ) IFP 100 mA Reverse Voltage VR 5 V Power Dissipation Pd 100 mW Operating Temperature Topr -40 ~ +85 ℃ Storage Temperature Tstg -40 ~ +100 ℃ ESD ESDHBM 150 V Soldering Temperature Tsol 2 Revision Copyright :1 © LifecyclePhase: 260 ℃ for 5 sec. 2010, Everlight All Rights Reserved. Release Date : MAY。2，2012. Issue No: DLE-0004704 _Rev.1 Release Date:2012-05-08 01:49:33.0 www.everlight.com Expired Period: Forever DATASHEET LAMP 7344-15UTC/S400-X9 YE Electro-Optical Characteristics (Ta=25℃) Parameter Symbol Min. Typ. Max. Unit Condition Forward Voltage VF 2.8 ----- 3.8 V IF=20mA Reverse Current IR ----- ----- 50 uA VR=5V Luminous Intensity IV 4500 ---- 14250 mcd IF=20mA Viewing Angle 2θ1/2 ---- 15 ---- deg IF=20mA Chromaticity Coordinates x y ---- 0.29 ---- ---- ---- 0.30 ---- ---- IF=20mA Bin Range of Luminous Intensity Bin Code Min. Max. Unit Condition R S T U V 4500.0 5650.0 7150.0 9000.0 11250.0 5650.0 7150.0 9000.0 11250.0 14250.0 mcd IF =20mA Bin Code Min. Max. Unit Condition 0 1 2 3 4 2.8 3.0 3.2 3.4 3.6 3.0 3.2 3.4 3.6 3.8 V IF =20mA Note: Tolerance of Luminous Intensity: ±10% Forward Voltage Combination Note: Measurement Uncertainty of Forward Voltage：±0.05V 3 Revision Copyright :1 © LifecyclePhase: 2010, Everlight All Rights Reserved. Release Date : MAY。2，2012. Issue No: DLE-0004704 _Rev.1 Release Date:2012-05-08 01:49:33.0 www.everlight.com Expired Period: Forever DATASHEET LAMP 7344-15UTC/S400-X9 YE CIE Chromaticity Diagram Color Ranks A0 B3 B4 B5 B6 CIE X Y X Y X Y X Y X 0.264 0.267 0.283 0.305 0.304 0.33 0.287 0.295 0.307 0.283 0.305 0.304 0.33 0.33 0.36 0.307 0.315 0.33 Y 0.315 0.339 0.296 0.267 0.307 0.315 0.33 0.339 0.311 0.294 0.33 0.318 0.28 0.248 0.287 0.295 0.307 0.315 0.296 0.276 0.311 0.294 Note: Measurement uncertainty of the color coordinates：±0.01 4 Revision Copyright :1 © LifecyclePhase: 2010, Everlight All Rights Reserved. Release Date : MAY。2，2012. Issue No: DLE-0004704 _Rev.1 Release Date:2012-05-08 01:49:33.0 www.everlight.com Expired Period: Forever DATASHEET LAMP 7344-15UTC/S400-X9 YE Typical Electro-Optical Characteristics Curves Relative Intensity vs. Wavelength (Ta=25℃) Directivity (Ta=25℃) 0.8 Radiation Angle Relative Intensity (a.u.) 1.0 0.6 0.4 0.2 0.0 350 400 450 500 550 600 650 700 750 800 Wavelength (nm) Relative Intensity (a.u.) Forward Current vs. Forward Voltage (Ta=25℃) Relative Intensity vs. Forward Current (Ta=25℃) 1.5 Relative Intensity(a.u.) Forward Current (mA) 25 20 15 10 5 0 2.0 2.5 3.0 3.5 4.0 1.0 0.5 0.0 4.5 0 5 10 15 20 25 Forward Voltage(V) Forward Voltage (V) Forward Current (mA) Chromaticity Coordinate vs. Forward Current(Ta=25℃) Forward Current vs. Ambient Temp. 30 Forward Current (mA) Chromaticity Coordinate 0.300 x 0.290 y 0.280 0.270 0.260 0 10 20 30 40 Forward Current (mA) 5 Revision Copyright :1 © LifecyclePhase: 50 25 20 15 10 5 0 0 20 40 60 80 100 Ambient Temperature Ta(℃) 2010, Everlight All Rights Reserved. Release Date : MAY。2，2012. Issue No: DLE-0004704 _Rev.1 Release Date:2012-05-08 01:49:33.0 www.everlight.com Expired Period: Forever DATASHEET LAMP 7344-15UTC/S400-X9 YE Package Dimension Note: Note: 1.All dimensions are in millimeters, and tolerance is 0.25mm except being specified. 2.Lead spacing is measured where the lead emerges from the package. 3.Protruded resin under flange is 1.5mm Max. LED. 6 Revision Copyright :1 © LifecyclePhase: 2010, Everlight All Rights Reserved. Release Date : MAY。2，2012. Issue No: DLE-0004704 _Rev.1 Release Date:2012-05-08 01:49:33.0 www.everlight.com Expired Period: Forever DATASHEET LAMP 7344-15UTC/S400-X9 YE Moisture Resistant Packing Materials Label Explanation Pb EVERLIGHT X RoHS ‧CPN: Customer’s Production Number ‧P/N : Production Number ‧QTY: Packing Quantity ‧CAT: Ranks of Luminous Intensity and Forward Voltage ‧HUE: Color Rank ‧REF: Reference ‧LOT No: Lot Number Packing Specification ■ Anti-electrostatic bag ■ Inner Carton ■ Outside Carton Pb EL ECTR OSTATIC ELECTR ONAGNET IC MAGNETIC OR RADIOACTIVE RELDS anti-static for 750 ■ Packing Quantity 1. 500 PCS/1 Bag, 5Bags/1 Inner Carton 2. 10 Inner Cartons/1 Outside Carton 7 Revision Copyright :1 © LifecyclePhase: 2010, Everlight All Rights Reserved. Release Date : MAY。2，2012. Issue No: DLE-0004704 _Rev.1 Release Date:2012-05-08 01:49:33.0 www.everlight.com Expired Period: Forever DATASHEET LAMP 7344-15UTC/S400-X9 YE Notes 1. Lead Forming  During lead formation, the leads should be bent at a point at least 3mm from the base of the epoxy bulb.  Lead forming should be done before soldering.  Avoid stressing the LED package during leads forming. The stress to the base may damage the LED’s characteristics or it may break the LEDs.  Cut the LED leadframes at room temperature. Cutting the leadframes at high temperatures may cause failure of the LEDs.  When mounting the LEDs onto a PCB, the PCB holes must be aligned exactly with the lead position of the LED. If the LEDs are mounted with stress at the leads, it causes deterioration of the epoxy resin and this will degrade the LEDs. 2. Storage  The LEDs should be stored at 30°C or less and 70%RH or less after being shipped from Everlight and the storage life limits are 3 months. If the LEDs are stored for 3 months or more, they can be stored for a year in a sealed container with a nitrogen atmosphere and moisture absorbent material.  Please avoid rapid transitions in ambient temperature, especially, in high humidity environments where condensation can occur. 3. Soldering  Careful attention should be paid during soldering. When soldering, leave more then 3mm from solder joint to epoxy bulb, and soldering beyond the base of the tie bar is recommended.  Recommended soldering conditions: Hand Soldering 300℃ Max. (30W Temp. at tip of iron Max.) Soldering time 3 sec Max. Distance 3mm Min.(From solder joint to epoxy bulb) 8 Revision Copyright :1 © LifecyclePhase: DIP Soldering 100℃ Max. (60 sec Preheat temp. Max.) 260 Max., 5 sec Bath temp. & time Max 3mm Min. (From Distance solder joint to epoxy bulb) 2010, Everlight All Rights Reserved. Release Date : MAY。2，2012. Issue No: DLE-0004704 _Rev.1 Release Date:2012-05-08 01:49:33.0 www.everlight.com Expired Period: Forever DATASHEET LAMP 7344-15UTC/S400-X9 YE  Recommended soldering profile laminar wave Fluxing Prehead  Avoiding applying any stress to the lead frame while the LEDs are at high temperature particularly when soldering.  Dip and hand soldering should not be done more than one time  After soldering the LEDs, the epoxy bulb should be protected from mechanical shock or vibration until the LEDs return to room temperature.  A rapid-rate process is not recommended for cooling the LEDs down from the peak temperature.  Although the recommended soldering conditions are specified in the above table, dip or handsoldering at the lowest possible temperature is desirable for the LEDs.  Wave soldering parameter must be set and maintain according to recommended temperature and dwell time in the solder wave. 4. Cleaning  When necessary, cleaning should occur only with isopropyl alcohol at room temperature for a duration of no more than one minute. Dry at room temperature before use.  Do not clean the LEDs by the ultrasonic. When it is absolutely necessary, the influence of ultrasonic cleaning on the LEDs depends on factors such as ultrasonic power and the assembled condition. Ultrasonic cleaning shall be pre-qualified to ensure this will not cause damage to the LED 9 Revision Copyright :1 © LifecyclePhase: 2010, Everlight All Rights Reserved. Release Date : MAY。2，2012. Issue No: DLE-0004704 _Rev.1 Release Date:2012-05-08 01:49:33.0 www.everlight.com Expired Period: Forever DATASHEET LAMP 7344-15UTC/S400-X9 YE 5. Heat Management  Heat management of LEDs must be taken into consideration during the design stage of LED application. The current should be de-rated appropriately by referring to the de-rating curve found in each product specification.  The temperature surrounding the LED in the application should be controlled. Please refer to the data sheet de-rating curve. 6. ESD (Electrostatic Discharge)  Electrostatic discharge (ESD) or surge current (EOS) can damage LEDs.  An ESD wrist strap, ESD shoe strap or antistatic gloves must be worn whenever handling LEDs.  All devices, equipment and machinery must be properly grounded.  Use ion blower to neutralize the static charge which might have built up on surface of the LEDs plastic lens as a result of friction between LEDs during storage and handing. 7. Other  Above specification may be changed without notice. EVERLIGHT will reserve authority on material change for above specification.  When using this product, please observe the absolute maximum ratings and the instructions for using outlined in these specification sheets. EVERLIGHT assumes no responsibility for any damage resulting from use of the product which does not comply with the absolute maximum ratings and the instructions included in these specification sheets.  These specification sheets include materials protected under copyright of EVERLIGHT corporation. Please don’t reproduce or cause anyone to reproduce them without EVERLIGHT’s consent. 10 Revision Copyright :1 © LifecyclePhase: 2010, Everlight All Rights Reserved. Release Date : MAY。2，2012. Issue No: DLE-0004704 _Rev.1 Release Date:2012-05-08 01:49:33.0 www.everlight.com Expired Period: Forever