ALS-PDIC243-3B

Ambient Light Sensor 5mm T-1 3/4 ALS-PDIC243-3B Features ‧Excellent IR-Cut performance ‧Close responsively to the human eye spectrum ‧Light to Current, analog output ‧Good output linearity across wide illumination range ‧Low sensitivity variation across various light sources o o ‧Operation temperature performance, -40 C to 85 C ‧Wide supply voltage range, 1.8V to 5.5V ‧Size: 5mm Lamp (Flat lens) ‧The product itself will remain within RoHS compliant version ‧Compliance with EU REACH ‧Compliance Halogen Free(Br < 900ppm, Cl < 900ppm, Br+Cl < 1500ppm) Description The ALS-PDIC243-3B is an ambient light sensor, which incorporates a photodiode and a current amplifier IC in DIP package. EVERLIGHT ALS series products are a good effective solution to the power saving of display backlighting of mobile appliances, such as the mobile phones, NB and PDAs. Due to the high rejection ratio of infrared radiation, the spectral response of the ambient light sensor is close to human eyes. Also, it is very suitable to use ALS product for opto-switch application. Applications ‧Ambient light monitoring device for daylight and artificial light – CCD camera/CCTV security equipment, Street light ‧Detection of ambient light to control display backlighting Computing device – TFT LCD monitor for Notebook computer Consumer device – TFT LCD TV, video camera, digital camera, toys 1 Copyright © 2012, Everlight All Rights Reserved. Release Date : 03.15.2017. Issue No: DLS-0000010 Rev.5 www.everlight.com DATASHEET Ambient Light Sensor 5mm T-1 3/4 ALS-PDIC243-3B Package Dimensions Notes: 1.All dimensions are in millimeters 2.Tolerances unless dimensions ±0.1mm 2 Copyright © 2012, Everlight All Rights Reserved. Release Date : 03.15.2017. Issue No: DLS-0000010 Rev.5 www.everlight.com DATASHEET Ambient Light Sensor 5mm T-1 3/4 ALS-PDIC243-3B Absolute Maximum Ratings Parameter Symbol Rating Unit Supply Voltage VCC -0.7 ~ 6.5 V Operating Temperature Range Ta -40 ~ +85 °C Storage Temperature Range TS -40 ~ +100 °C Soldering Temperature TSOL 260 °C [Note1] Recommended Operating Conditions Parameter Symbol Min. Max. Unit Operating Temperature Ta -40 +85 °C Supply Voltage VCC 1.8 5.5 V Rankings Min. Max. 1 10 16 2 14 23 Bin Symbol IPH2 3 3 20 30 4 26 35 Unit Test Condition uA VCC=3V EV = 100Lux Copyright © 2012, Everlight All Rights Reserved. Release Date : 03.15.2017. Issue No: DLS-0000010 Rev.5 www.everlight.com DATASHEET Ambient Light Sensor 5mm T-1 3/4 ALS-PDIC243-3B Electrical and Optical Characteristics (Ta=25℃) Parameter Symbol MIN TYP MAX. Unit Dark Current ID --- 0.05 0.1 uA VCC=3V, Ev= 0Lux IPH1 1 --- 3.5 uA VCC=3V, Ev= 10Lux IPH2 10 --- 35 uA VCC=3V, Ev= 100Lux IPH3 100 --- 350 uA VCC=3V, Ev= 1000Lux IPH4 100 300 --- uA VCC=3V, Ev= 1000Lux Photocurrent Ratio IPH4 / IPH3 --- 1.2 --- --- VCC=3V, Ev= 1000Lux Peak Sensitivity Wavelength λp --- 560 --- nm --- Sensitivity Wavelength Range λ 390 --- 700 nm --- Rise time tr --- 0.36 --- ms Light Current Test Condition [Note1] [Note1] [Note1] [Note2] VCC = 3 V RL = 27KΩ Fall time tf --- 1.13 --- ms Angle of half Sensitivity 2θ1/2 --- 143 --- Deg. IF=20mA Note: 1. White Fluorescent light (Color Temperature = 6500K) is used as light source. However, White LED is substituted in mass production. 2. Illuminance by CIE standard illuminant-A / 2856K, incandescent lamp. 4 Copyright © 2012, Everlight All Rights Reserved. Release Date : 03.15.2017. Issue No: DLS-0000010 Rev.5 www.everlight.com DATASHEET Ambient Light Sensor 5mm T-1 3/4 ALS-PDIC243-3B Typical Electrical and Optical Characteristics Curves Fig.1 Light Current vs. Illuminance Fig.2 1000 10 Ta = 25 ℃ Vcc = 3V VCC = 3V 1 Output voltage (V) 100 Light current (uA) Output Voltage vs. Illuminance 10 1 0.1 0.01 Fluorence Fluorence Fluorence Fluorence 1E-3 light R L light R L light R L light R L = 1 KΩ = 7.5 KΩ = 27 KΩ = 75 KΩ 0.1 1 10 100 1000 Illuminance (Lux) 1E-4 1 10 100 1000 10000 Illuminance (Lux) Fig.3 Spectral Response Fig.4 Light current vs. Supply Voltage 1000 Light current (uA) EV = 100 Lux 100 10 1 1 2 3 4 5 6 Supply voltage (V) Fig.5 Fig.6 Light Current vs. Temperature Dark Current vs. Temperature 2.0 1.8 Relative light current 1.6 VCC = 3V EV = 100 Lux 1.4 1.2 1.0 0.8 0.6 0.4 0.2 0.0 -60 -40 -20 0 20 40 60 80 100 Temperature (℃ ) 5 Copyright © 2012, Everlight All Rights Reserved. Release Date : 03.15.2017. Issue No: DLS-0000010 Rev.5 www.everlight.com DATASHEET Ambient Light Sensor 5mm T-1 3/4 ALS-PDIC243-3B Converting Photocurrent to Voltage ALS-PDIC 243-3B Note: 1. The output voltage (VOUT) is the product of photocurrent (IPH) and loading resistor (RL) 2. A right loading resistor shall be chosen to meet the requirement of maximum ambient light, and output saturation voltage: VOUT (max.) = IOUT (max.) × RL ≦VOUT (saturation)＝VCC－0.4V 6 Copyright © 2012, Everlight All Rights Reserved. Release Date : 03.15.2017. Issue No: DLS-0000010 Rev.5 www.everlight.com DATASHEET Ambient Light Sensor 5mm T-1 3/4 ALS-PDIC243-3B Packing Quantity Specification 1.500PCS/1Bag，5Bags/1Box 2.10Boxes/1Carton Label Format Pb EVERLIGHT CPN : P N : XXXXXXXXXXXXX RoHS XXXXXXXXXXXXX QTY : XXX LOT NO : XXXXXXXXXX CAT : XXX HUE : XXX REF : XXX CPN: Customer’s Production Number P/N : Production Number QTY: Packing Quantity CAT: Ranks HUE: Peak Wavelength REF: Reference LOT No: Lot Number MADE IN TAIWAN: Production Place Reference : XXXXXXXX 7 Copyright © 2012, Everlight All Rights Reserved. Release Date : 03.15.2017. Issue No: DLS-0000010 Rev.5 www.everlight.com DATASHEET Ambient Light Sensor 5mm T-1 3/4 ALS-PDIC243-3B DISCLAIMER 1. EVERLIGHT reserves the right(s) on the adjustment of product material mix for the specification. 2. The product meets EVERLIGHT published specification for a period of twelve (12) months from date of shipment. 3. The graphs shown in this datasheet are representing typical data only and do not show guaranteed values. 4. When using this product, please observe the absolute maximum ratings and the instructions for using outlined in these specification sheets. EVERLIGHT assumes no responsibility for any damage resulting from the use of the product which does not comply with the absolute maximum ratings and the instructions included in these specification sheets. 5. These specification sheets include materials protected under copyright of EVERLIGHT. Reproduction in any form is prohibited without obtaining EVERLIGHT’s prior consent. 6. This product is not intended to be used for military, aircraft, automotive, medical, life sustaining or life saving applications or any other application which can result in human injury or death. Please contact authorized Everlight sales agent for special application request. 8 Copyright © 2012, Everlight All Rights Reserved. Release Date : 03.15.2017. Issue No: DLS-0000010 Rev.5 www.everlight.com