CLS15-22C-L213B-TR8

Surface - Mount RGB Color Sensor CLS15-22C/L213R/TR8 CLS15-22C/L213G/TR8 CLS15-22C/L213B/TR8 Features Surface-mount plastic package High sensitivity for Red, Green, and Blue light source CLS15-22C/L213R/TR8 (λp= 620nm, Red) CLS15-22C/L213G/TR8 (λp= 550nm, Green) CLS15-22C/L213B/TR8 (λp= 470nm, Blue) Good stable analog output with temperature shift Size: 3.2mm (L)*2.7mm (W)*1.1mm (H) Operating temperature performance, -40oC to 85oC Active area: 1.8 mm2 RoHS compliant and Pb free package Descriptions CLS15-22C/L213/TR8 series color sensor device is one channel Si photodiode sensitivity to Red, Green and Blue region spectrum in miniature SMD package. Everlight color sensor series product is the good effective and low cost solution to white color balance, color detection and color management applications. Applications Color adjustment for LED back light system Color adjustment for LED projector Color detection White balance adjustment Consumer and mobile appliances Everlight Electronics Co., Ltd. Document No: DCS-015-001 Rev2.0 ․ ․ ․ ․ ․ ․ ․ ․ ․ ․ ․ ․ 1 http:\\www.everlight.com Nov. 15, 2007 Surface - Mount RGB Color Sensor CLS15-22C/L213R/TR8 CLS15-22C/L213G/TR8 CLS15-22C/L213B/TR8 Package Dimensions Anode Cathode Unit: mm Tolerances: ± 0.1mm Everlight Electronics Co., Ltd. Document No: DCS-015-001 Rev2.0 2 http:\\www.everlight.com Nov. 15, 2007 Surface - Mount RGB Color Sensor CLS15-22C/L213R/TR8 CLS15-22C/L213G/TR8 CLS15-22C/L213B/TR8 Absolute Maximum Ratings (Ta=25°C) Parameter Reverse Breakdown Voltage Forward Voltage Operating Temperature Storage Temperature Soldering Temperature [Note] Symbol VBR VF Topr Tstg Tsol Condition IR = 100µA IF = 10mA － － － Rating 35 0.5~1.3 -40 ~ +85 -40 ~ +85 260 Units V V °C °C °C Electro-Optical Characteristics (Ta=25°C) Red Color Sensor: CLS15-22C/L213R/TR8 Parameter Peak Sensitivity Wavelength Short-Circuit Current Symbol λP ISC IL1 Reverse Light Current IL2 Reverse Dark Current Photo sensitivity ID S Condition － Ee=100Lux VR=0V Ee=100Lux VR=5V MIN. － － TYP. MAX. Unit 620 0.086 0.091 0.83 2 0.21 － － nm µA µA µA nA A/W Note: W hite Fluorescent light (Color Temperature = 6500K) is used as light source Everlight Electronics Co., Ltd. Document No: DCS-015-001 Rev2.0 ≦ Note: Soldering time 5 seconds [Note] [Note] － － － － － － 10 Ee=1000Lux VR=5V [Note] Ee=0 VR = 10 V Red (λP=630nm) － 3 http:\\www.everlight.com Nov. 15, 2007 Surface - Mount RGB Color Sensor CLS15-22C/L213R/TR8 CLS15-22C/L213G/TR8 CLS15-22C/L213B/TR8 Green Color Sensor: CLS15-22C/L213G/TR8 Parameter Peak Sensitivity Wavelength Short-Circuit Current Symbol λP ISC IL1 Reverse Light Current IL2 Reverse Dark Current Photo sensitivity ID S Condition － Ee=100Lux VR=0V Ee=100Lux VR=5V [Note] MIN. － － TYP. MAX. Unit 550 0.075 0.082 0.72 2 0.18 － － nm µA µA µA nA A/W [Note] － － － － － － 10 Ee=1000Lux VR=5V [Note] Ee=0 Lux VR = 10 V Green (λP=520nm) － Note: W hite Fluorescent light (Color Temperature = 6500K) is used as light source Blue Color Sensor: CLS15-22C/L213B/TR8 Parameter Peak Sensitivity Wavelength Short-Circuit Current Symbol λP ISC IL1 Reverse Light Current IL2 Reverse Dark Current Photo sensitivity ID S Condition － Ee=100Lux VR=0V Ee =100Lux VR=5V MIN. － － TYP. MAX. Unit 470 0.042 0.046 0.39 2 0.09 － － nm µA µA µA nA A/W [Note] [Note] － － － － － － 10 Ee =1000Lux VR=5V [Note] VR = 10 V Blue (λP=465nm) － Note: W hite Fluorescent light (Color Temperature = 6500K) is used as light source Everlight Electronics Co., Ltd. Document No: DCS-015-001 Rev2.0 4 http:\\www.everlight.com Nov. 15, 2007 Surface - Mount RGB Color Sensor CLS15-22C/L213R/TR8 CLS15-22C/L213G/TR8 CLS15-22C/L213B/TR8 Typical Electro-Optical Characteristics Curves Fig.1 Dark Current vs. Temperature (typ.) 1000 C LS15-22C/L123B/T R8 C LS15-22C/L123G/T R8 C LS15-22C/L123R/T R8 Fig.2 Light current vs. Illuminance (typ.) 10 V R =5V ; Ta=25 C C LS 15-22C /L213R C LS 15-22C /L213G C LS 15-22C /L213B o Average dark current (nA) 100 1 10 Ouput Current (mA) -20 0 20 40 60 80 100 VR = 10 V EV = 0 LUX 0.1 1 0.01 0.1 1E -3 0.01 -60 -40 1E -4 Fig.3 Light current vs. Voltage (typ.) 0.20 Average light current (uA) Average light current (uA) C LS 15-22C /L213R /TR 8 White Fluorescent light C LS 15-22C /L213G/T R 8 Ev = 100Lux C LS 15-22C /L213B/TR 8 0.15 0.10 0.05 0.00 1 2 3 4 Voltage (V) Fig.5 Spectral Response (Blue region) (typ.) Fig.6 Spectral Response (Green region) (typ.) Everlight Electronics Co., Ltd. Document No: DCS-015-001 Rev2.0 5 ℃ ℃ ℃ ℃ ℃ ℃ ℃ ℃ Temperature ( ) 1 10 100 1000 10000 Illum inance (Lux) Fig.4 10 Light current vs. Temperature (typ.) C LS 15-22C/L213R/TR8 C LS 15-22C/L213G/TR8 C LS 15-22C/L213B/TR8 Ev = 100Lux 1 0.1 0.01 5 6 7 -60 -40 -20 0 20 40 ) 60 80 100 Temperature ( http:\\www.everlight.com Nov. 15, 2007 Surface - Mount RGB Color Sensor CLS15-22C/L213R/TR8 CLS15-22C/L213G/TR8 CLS15-22C/L213B/TR8 Fig.7 Spectral Response (Red region) (typ.) Everlight Electronics Co., Ltd. Document No: DCS-015-001 Rev2.0 6 http:\\www.everlight.com Nov. 15, 2007 Surface - Mount RGB Color Sensor Recommended method of storage Reflow Terms: JEDEC Level 4 Specification CLS15-22C/L213R/TR8 CLS15-22C/L213G/TR8 CLS15-22C/L213B/TR8 Dry box storage is recommended as soon as the aluminum bag has been opened prevent moisture absorption. The following conditions should be observed, if dry boxes are not available: After more than 72 hours under these conditions moisture content will be too high for Reflow soldering. In case of moisture absorption, the devices will recover to former condition by drying under the following condition: 96 hours at 60 +5 24 hours at 125 +5 ESD Precaution: Proper storage and handing procedures should be followed to prevent ESD damage to the devices especially when they are removed from the Anti-static bag. Electro-Static Sensitive Devices warning labels are on the packing. Recommended Solder Profile Notice: (1) Reflow soldering should not be done more than two times. (2) When soldering, do not put stress on the devices during heating. (3) After soldering, do not warp the circuit board. Everlight Electronics Co., Ltd. Document No: DCS-015-001 Rev2.0 ℃℃ ℃℃ ℃℃℃ 192 hours at 40 +5 ≦ Storage humidity 60%RH max /-0 and 5%RH (dry air / nitrogen), or and < 5%RH for all device containers, or not suitable for reel or tubes ℃ 7 http:\\www.everlight.com Nov. 15, 2007 ℃ Storage temperature 10 to 30 Surface - Mount RGB Color Sensor Soldering Iron CLS15-22C/L213R/TR8 CLS15-22C/L213G/TR8 CLS15-22C/L213B/TR8 seconds within once in less than the soldering iron capacity 25W. Leave two seconds and more intervals, and do soldering of each terminal. Be careful because the damage of the product is often started at the time of the hand solder. Repairing Repair should not be done after the device have been soldered. When repairing is unavoidable, a double-head soldering iron should be used (as below figure). It should be confirmed beforehand whether the characteristics of the device will or will not be damaged by repairing. Everlight Electronics Co., Ltd. Document No: DCS-015-001 Rev2.0 8 http:\\www.everlight.com Nov. 15, 2007 ℃ Each terminal is to go to the tip of soldering iron temperature less than 350 for 3 Surface - Mount RGB Color Sensor CLS15-22C/L213R/TR8 CLS15-22C/L213G/TR8 CLS15-22C/L213B/TR8 Packing Quantity Specification 2000 PCS/ 1 Reel Label Format xxxxxx xxxxxx RoHS xxxxxxxxxxxx xxxx xxxxxxxx Reel Dimensions Unit: mm Tolerance: ±0.1mm Everlight Electronics Co., Ltd. Document No: DCS-015-001 Rev2.0 9 http:\\www.everlight.com Nov. 15, 2007 Surface - Mount RGB Color Sensor CLS15-22C/L213R/TR8 CLS15-22C/L213G/TR8 CLS15-22C/L213B/TR8 Tape Dimensions Unit: mm Tolerance: ±0.1mm Moisture Resistant Packaging LLabel abel Aluminum moistue-proof bag Aluminum moisture-proof bag Desiccant Desiccant Label Label Everlight Electronics Co., Ltd. Document No: DCS-015-001 Rev2.0 10 http:\\www.everlight.com Nov. 15, 2007 Surface - Mount RGB Color Sensor CLS15-22C/L213R/TR8 CLS15-22C/L213G/TR8 CLS15-22C/L213B/TR8 Notes 1. Above specification may be changed without notice. EVERLIGHT will reserve authority onmaterial change for above specification. 2. When using this product, please observe the absolute maximum ratings and the instructions for using outlined in these specification sheets. EVERLIGHT assumes no responsibility for any damage resulting from use of the product which does not comply with the absolute maximum ratings and the instructions included in these specification sheets. 3. These specification sheets include materials protected under copyright of EVERLIGHT corporation. Please don’t reproduce or cause anyone to reproduce them without EVERLIGHT’s consent. Everlight Electronics Co., Ltd. Document No: DCS-015-001 Rev2.0 11 http:\\www.everlight.com Nov. 15, 2007