EAHE2835WD43

SMD
PLCC EAHE2835WD43 Features ‧PLCC-2 package ‧Top view white LED ˙High luminous intensity output ˙Wide viewing angle ˙Pb-free ˙RoHS compliant ˙ANSI Binning Description The Everlight EAHE2835WD43 package has high efficacy, high CRI, low power consumption, wide viewing angle and a compact form factor. These features make this package an ideal LED for all lighting applications. Applications ‧ General lighting ‧ Decorative and Entertainment Lighting ‧ Indicators ‧ Illumination ‧ Switch lights 1 Copyright © 2015, Everlight Americas Inc.. Release Date: 15.Dec. 2015. Issue No: Issue No: www.everlightamericas.com DATASHEET SMD
PLCC EAHE2835WD43 Mass Production List Product CRI Min.(1) CCT(K) Φ(lm) Min. (2) Φ(lm) Max. (2) EAHE2835WD43 80 5000K 30 40 Notes: 1. Tolerance of Color Rendering Index: ±2 2. Tolerance of Luminous flux: ±11%. 2 Copyright © 2015, Everlight Americas Inc.. Release Date: 15.Dec. 2015. Issue No: Issue No: www.everlightamericas.com DATASHEET SMD
PLCC EAHE2835WD43 Device Selection Guide Chip Emitted Color Materials Resin Color Cool White InGaN Neutral White Water Clear Warm White Absolute Maximum Ratings (TSoldering=25℃ ℃) Parameter Symbol Rating Unit Forward Current IF 180 mA Peak Forward Current (Duty 1/10 @10ms) IFP 300 mA Power Dissipation Pd 580 mW Operating Temperature Topr -40 ~ +85 Storage Temperature Tstg -40 ~ +100 Rth J-S 30 Junction Temperature Tj 115 Soldering Temperature Tsol Thermal Resistance (Junction / Soldering point) ℃ ℃ ℃/W ℃ ℃ for 10 sec. Hand Soldering : 350 ℃ for 3 sec. Reflow Soldering : 260 Note: The products are sensitive to static electricity and must be carefully taken when handling products Electro-Optical Characteristics (TSoldering=25℃ ℃) Parameter Symbol Min. Typ. Max. Unit Luminous Flux(1) Φ 27 ----- 40 lm IF=65mA Forward Voltage(2) VF 2.5 ----- 3.2 V IF=65mA Color Rendering Index(3) Ra 80 ----- ----- Efficacy(1) (4) ----- ----- 180 ----- lm/W IF=65mA Viewing Angle 2θ1/2 ----- 120 ----- deg IF=65mA IR ----- ----- 50 µΑ VR =5V Reverse Current Condition IF=65mA Notes: 1. Tolerance of Luminous flux: ±11%. 2. Tolerance of Forward Voltage: ±0.1V. 3. Tolerance of Color Rendering Index: ±2 4. Efficacy characteristics under the condition of 65mA and 5000K . 3 Copyright © 2015, Everlight Americas Inc.. Release Date: 15.Dec. 2015. Issue No: Issue No: www.everlightamericas.com DATASHEET SMD
PLCC EAHE2835WD43 Bin Range of Luminous Flux 2700K---Bin Code Min. Max. T1 27 29 T2 29 31 T3 31 33 T4 33 35 T5 35 37 Bin Code Min. Max. T1 28 30 T2 30 32 T3 32 34 T4 34 36 T5 36 38 Bin Code Min. Max. T1 29 31 T2 31 33 T3 33 35 T4 35 37 T5 37 39 Unit Condition lm IF=65mA Unit Condition lm IF=65mA Unit Condition lm IF=65mA 3000K---- 4000K---- 4 Copyright © 2015, Everlight Americas Inc.. Release Date: 15.Dec. 2015. Issue No: Issue No: www.everlightamericas.com DATASHEET SMD
PLCC EAHE2835WD43 5000K--Bin Code Min. Max. T1 30 32 T2 32 34 T3 34 36 T4 36 38 T5 38 40 Bin Code Min. Max. T1 30 32 T2 32 34 T3 34 36 T4 36 38 T5 38 40 Bin Code Min. Max. T1 29 31 T2 31 33 T3 33 35 T4 35 37 T5 37 39 Unit Condition lm IF=65mA Unit Condition lm IF=65mA Unit Condition lm IF=65mA 5700K--- 6500K--- Notes: Tolerance of Luminous flux: ±11% 5 Copyright © 2015, Everlight Americas Inc.. Release Date: 15.Dec. 2015. Issue No: Issue No: www.everlightamericas.com DATASHEET SMD
PLCC EAHE2835WD43 Bin Range of Forward Voltage Group 2532 Bin Code Min. Max. 32 2.5 2.6 33 2.6 2.7 34 2.7 2.8 35 2.8 2.9 36 2.9 3.0 37 3.0 3.1 38 3.1 3.2 Unit Condition V IF=65mA Note: Tolerance of Forward Voltage: ±0.1V. 6 Copyright © 2015, Everlight Americas Inc.. Release Date: 15.Dec. 2015. Issue No: Issue No: www.everlightamericas.com DATASHEET SMD
PLCC EAHE2835WD43 Bin Code of Macadam 3 step and 5 step Step 3 7 CCT Cx Cy a b theta 2700 0.4583 0.4104 0.00810 0.00420 49.70 3000 0.4345 0.4033 0.00834 0.00408 50.22 3500 0.4080 0.3919 0.00927 0.00414 51.00 4000 0.3827 0.3803 0.00939 0.00402 54.80 5000 0.3451 0.3559 0.00822 0.00354 64.12 5700 0.3293 0.3423 0.00747 0.00321 66.51 6500 0.3131 0.3290 0.00669 0.00285 64.57 Copyright © 2015, Everlight Americas Inc.. Release Date: 15.Dec. 2015. Issue No: Issue No: www.everlightamericas.com DATASHEET SMD
PLCC EAHE2835WD43 The C.I.E. 1931 Chromaticity Diagram 0.43 0.42 CIE_y 0.41 27-M3 30-M3 0.40 35-M3 0.39 0.38 0.37 0.39 0.40 0.41 0.42 0.43 0.44 0.45 0.46 0.47 0.48 CIE_x The C.I.E. 1931 Chromaticity Diagram 0.41 0.40 CIE_y 0.39 0.38 40-M3 0.37 0.36 0.35 0.36 0.37 0.38 0.39 0.40 0.41 CIE_x 8 Copyright © 2015, Everlight Americas Inc.. Release Date: 15.Dec. 2015. Issue No: Issue No: www.everlightamericas.com DATASHEET SMD
PLCC EAHE2835WD43 The C.I.E. 1931 Chromaticity Diagram 0.38 0.37 0.36 CIE_y 50-M3 0.35 57-M3 0.34 0.33 65-M3 0.32 0.31 0.30 0.31 0.32 0.33 0.34 0.35 0.36 CIE_x Note: 1. The value is based on driving current by 65mA. 2. Tolerance of Chromaticity Coordinates: ±0.01. 9 Copyright © 2015, Everlight Americas Inc.. Release Date: 15.Dec. 2015. Issue No: Issue No: www.everlightamericas.com DATASHEET SMD
PLCC EAHE2835WD43 Spectrum Distribution Typical Electro-Optical Characteristics Curves Fig.2 - Relative Luminous Intensity vs. Forward Current Fig.1 – Forward Voltage Shift vs. Junction Temperature 2.4 Relative Luminous Intensity Forward Voltage Shift (V) 0.10 0.05 0.00 -0.05 -0.10 -0.15 -0.20 -0.25 2.0 1.6 1.2 0.8 0.4 0.0 -0.30 25 35 45 55 65 75 85 95 105 0 115 o Tj - Junction Temperature ( C) 10 Copyright © 2015, Everlight Americas Inc.. Release Date: 15.Dec. 2015. Issue No: Issue No: 20 40 60 80 100 120 140 160 180 Forward Current(mA) www.everlightamericas.com DATASHEET SMD
PLCC EAHE2835WD43 Typical Electro-Optical Characteristics Curves Fig.4 - Forward Current vs. Forward Voltage Fig.3 - Relative Luminous Intensity vs. Junction Temperature o TS=25 C 180 1.0 IF-Forward Current(mA) Relative Luminous Flux 1.2 0.8 0.6 0.4 0.2 160 140 120 100 80 60 40 20 0.0 25 40 55 70 85 100 115 o Tj - Junction Temperature( C ) 0 2.6 2.7 2.8 2.9 3.0 3.1 3.2 VF- Forward Voltage (V) Fig.5 – Max. Driving Forward Current vs. Soldering Temperature 。 Rth j-s=30 C/W Fig.6 – Radiation Diagram 0° 10° 20° 30° 210 Forward Current (mA) 180 150 120 90 0.9 0.8 50° 0.7 70° 80° 90° 60° 60 30 0 11 40° 1.0 0 20 40 60 o Soldering Temperature ( C) 80 100 Copyright © 2015, Everlight Americas Inc.. Release Date: 15.Dec. 2015. Issue No: Issue No: 0.5 0.3 0.1 0.2 0.4 0.6 www.everlightamericas.com DATASHEET SMD
PLCC EAHE2835WD43 Package Dimension Note: Tolerance unless mentioned is ±0.15mm; Unit = mm 12 Copyright © 2015, Everlight Americas Inc.. Release Date: 15.Dec. 2015. Issue No: Issue No: www.everlightamericas.com DATASHEET SMD
PLCC EAHE2835WD43 Moisture Resistant Packing Materials Label Explanation ‧CPN: Customer’s Product Number ‧P/N: Product Number ‧QTY: Packing Quantity ‧CAT: Luminous Intensity Rank ‧HUE: Dom. Wavelength Rank ‧REF: Forward Voltage Rank ‧LOT No: Lot Number Reel Dimensions Note: Tolerances unless mentioned ±0.1mm. Unit = mm 13 Copyright © 2015, Everlight Americas Inc.. Release Date: 15.Dec. 2015. Issue No: Issue No: www.everlightamericas.com DATASHEET SMD
PLCC EAHE2835WD43 Carrier Tape Dimensions: Loaded Quantity 2000 pcs Per Reel Progressive direction 1.5+0.1 Note: 1.Tolerance unless mentioned is ±0.1mm; Unit = mm Moisture Resistant Packing Process Label 14 Aluminum moisture-proof bag Desiccant Copyright © 2015, Everlight Americas Inc.. Release Date: 15.Dec. 2015. Issue No: Issue No: Label www.everlightamericas.com DATASHEET SMD
PLCC EAHE2835WD43 Reliability Test Items and Conditions The reliability of products shall be satisfied with items listed below. Confidence level 90% LTPD 10% ： ： No. Items 1 Reflow Soldering 2 Thermal Shock 3 Temperature Cycle 4 High Temperature/Humidity Reverse Bias 5 High Temperature/Humidity Operation 6 Low Temperature Storage 7 High Temperature Storage 8 Low Temperature Operation Life High Temperature Operation/ Life#1 9 High Temperature Operation/ Life#2 10 High Temperature Operation/ Life#3 11 15 Test Condition ℃/10sec. H : +100℃ 20min ∫ 10 sec L : -10℃ 20min H : +100℃ 30min ∫ 5 min L : -40℃ 30min Ta=85℃,85%RH Ta=85℃,85%RH, I = 100 mA Ta=-40℃ Ta=85℃ Ta=-40℃, I = 180 mA Ta=25℃, I = 180 mA Ta=55℃, I =180 mA Ta=85℃, Test Hours/Cycles Sample Size Ac/Re 6 Min. 22 PCS. 0/1 22 PCS. 0/1 200 Cycles 22 PCS. 0/1 1000 Hrs. 22 PCS. 0/1 1000 Hrs. 22 PCS. 0/1 1000 Hrs. 22 PCS. 0/1 1000 Hrs. 22 PCS. 0/1 1000 Hrs. 22 PCS. 0/1 1000 Hrs. 22 PCS. 0/1 1000 Hrs. 22 PCS. 0/1 1000 Hrs. 22 PCS. 0/1 Temp. : 260 F F F F IF = 100 mA Copyright © 2015, Everlight Americas Inc.. Release Date: 15.Dec. 2015. Issue No: Issue No: 200 Cycles www.everlightamericas.com DATASHEET SMD
PLCC EAHE2835WD43 Precautions for Use 1. Over-current-proof Customer must apply resistors for protection; otherwise slight voltage shift will cause big current change (Burn out will happen). 2. Storage 2.1 Do not open moisture proof bag before the products are ready to use. ℃ or less and 90%RH or less. 2.3 After opening the package: The LED's floor life is 168 Hrs under 30℃ or less and 60% RH or less. If unused 2.2 Before opening the package: The LEDs should be kept at 30 LEDs remain, it should be stored in moisture proof packages. 2.4 If the moisture absorbent material (silica gel) has faded away or the LEDs have exceeded the storage time, baking treatment should be performed using the following conditions. ℃ Baking treatment: 60±5 for 24 hours. 3. Soldering Condition 3.1 Pb-free solder temperature profile 260 C Max. 10sec. Max. Above255 C 30sec.Max. 3 C/sec.Max. 6 C/sec.Max. Pre-heating Above 217 60~150 sec. 150~200 C 60~120sec. 3.2 Reflow soldering should not be done more than two times. 3.3 When soldering, do not put stress on the LEDs during heating. 3.4 After soldering, do not warp the circuit board. 4. Soldering Iron 16 Copyright © 2015, Everlight Americas Inc.. Release Date: 15.Dec. 2015. Issue No: Issue No: www.everlightamericas.com DATASHEET SMD
PLCC EAHE2835WD43 ℃ Each terminal is to go to the tip of soldering iron temperature less than 350 for 3 seconds within once in less than the soldering iron capacity 25W. Leave two seconds and more intervals, and do soldering of each terminal. Be careful because the damage of the product is often started at the time of the hand solder. 5. Repairing Repair should not be done after the LEDs have been soldered. When repairing is unavoidable, a double-head soldering iron should be used (as below figure). It should be confirmed beforehand whether the characteristics of the LEDs will or will not be damaged by repairing. 17 Copyright © 2015, Everlight Americas Inc.. Release Date: 15.Dec. 2015. Issue No: Issue No: www.everlightamericas.com