EAPL2214YA2

Mini Top View LEDs EAPL2214YA2 PRELIMINARY Features ․White SMT package. ․Optical indicator. ․Wide viewing angle. ․Soldering methods: reflow soldering ․Available on tape and reel ․Pb-free ․The product itself will remain within RoHS compliant version. Applications ․Optical indicators. ․Coupling into light guides. ․Backlighting (LCD, cellular phones, switches, keys, displays, illuminated advertising, general lighting). ․Coupling into light guides; Interior automotive lighting (e.g. dashboard backlighting, etc.). 1 Copyright © 2010, Everlight Americas All Rights Reserved. Release Date : Apr.30.2014. Issue No: XXXXXXX www.everlightamericas.com DATASHEET SMD  REFLECTOR EAPL2214YA2 Device Selection Guide Chip Materials AlGaInP Emitted Color Resin Color Brilliant Yellow Water Clear Absolute Maximum Ratings (Ta=25℃) Parameter Symbol Rating Unit Reverse Voltage VR 5 V Forward Current IF 50 mA Peak Forward Current IFP 100 mA (Duty 1/10 @1KHz) Power Dissipation Pd 120 mW Electrostatic Discharge (HBM) ESD 2000 V Operating Temperature Topr -40 ~ +85 ℃ Storage Temperature Tstg -40 ~ +90 ℃ Soldering Temperature Tsol Reflow Soldering : 260 ℃ for 10 sec. Hand Soldering : 350 ℃ for 3 sec. 2 Copyright © 2010, Everlight Americas All Rights Reserved. Release Date : Apr.30.2014. Issue No: XXXXXXX www.everlightamericas.com DATASHEET SMD  REFLECTOR EAPL2214YA2 Electro-Optical Characteristics (Ta=25℃) Symbol Min. Typ. Max. Unit Condition Luminous Intensity Iv 140 ----- 225 mcd IF=20mA Viewing Angle 2θ1/2 ----- 120 ----- deg IF=20mA Peak Wavelength λp ----- 591 ----- nm IF=20mA Dominant Wavelength λd 586 ----- 594 nm IF=20mA Spectrum Radiation Bandwidth Δλ ----- 15 ----- nm IF=20mA Forward Voltage VF 1.75 ----- 2.35 V IF=20mA Reverse Current IR ----- ----- 10 μA VR=5V Parameter Note: 1. Tolerance of Luminous Intensity: ±11% 2. Tolerance of Dominant Wavelength: ±1nm 3. Tolerance of Forward Voltage: ±0.1V Bin Range of Luminous Intensity Bin Min Max R2 140 180 S1 180 225 Unit Condition mcd IF=20mA Note: Tolerance of Luminous Intensity: ±11% Bin Range of Dominant Wavelength Group Bin Code Min. Max. DD1 586 588 DD2 588 590 DD3 590 592 DD4 592 594 F Note: 3 Unit Condition nm IF=20mA Tolerance of Dominant Wavelength: ±1nm Copyright © 2010, Everlight Americas All Rights Reserved. Release Date : Apr.30.2014. Issue No: XXXXXXX www.everlightamericas.com DATASHEET SMD  REFLECTOR EAPL2214YA2 Bin Rang of Forward Voltage Group B Bin 0 1 2 Min 1.75 1.95 2.15 Max 1.95 2.15 2.35 Unit Condition V IF=20mA Note: Tolerance of Forward Voltage ±0.1V 4 Copyright © 2010, Everlight Americas All Rights Reserved. Release Date : Apr.30.2014. Issue No: XXXXXXX www.everlightamericas.com DATASHEET SMD  REFLECTOR EAPL2214YA2 Typical Electro-Optical Characteristics Curves Forward Current vs. Forward Voltage Spectrum Distribution Ta=25°C 50 Forward Current IF (mA) Relative luminous intensity (%) 100 75 50 25 0 500 40 30 20 10 0 600 650 550 Wavelength λ (nm) 1.6 700 1000 100 2.2 2.4 2.6 10 1000 f=1KHz Duty=1/10 100 10 1 0 10 0 20 40 60 80 100 Ambient Temperature Ta (°C) 2 1 10 10 Forward Current I F (mA) 3 10 Radiation Diagram Forward Current Derating Curve 0° 50 Forward Current I F (mA) 2.0 Relative Luminous Intensity vs. Forward Current Ta=25°C Relative luminous intensity (%) Relative luminous intensity (%) 1.8 Forward Voltage V (V) F Relative Luminous Intensity vs. Ambient Temperature 1 -60 -40 -20 Ta=25°C Ta=25°C 10° 20° 30° 40 40° 1.0 30 0.9 50° 20 0.8 60° 10 0.7 0 0 20 40 60 80 100 70° 80° 90° 0.5 0.3 0.1 0.2 0.4 0.6 Ambient Temperature Ta (°C) 5 Copyright © 2010, Everlight Americas All Rights Reserved. Release Date : Apr.30.2014. Issue No: XXXXXXX www.everlightamericas.com DATASHEET SMD  REFLECTOR EAPL2214YA2 Package Dimension Note: Tolerances unless mentioned ±0.1mm. Unit = mm 6 Copyright © 2010, Everlight Americas All Rights Reserved. Release Date : Apr.30.2014. Issue No: XXXXXXX www.everlightamericas.com DATASHEET SMD  REFLECTOR EAPL2214YA2 Moisture Resistant Packing Materials Label Explanation ‧CPN: Customer’s Product Number ‧P/N: Product Number ‧QTY: Packing Quantity ‧CAT: Luminous Intensity Rank ‧HUE: Dom. Wavelength Rank ‧REF: Forward Voltage Rank ‧LOT No: Lot Number Reel Dimensions Carrier Tape Dimensions: Loaded Quantity 2000 pcs Per Reel ② ① Note: Tolerances unless mentioned ±0.1mm. Unit = mm 7 Copyright © 2010, Everlight Americas All Rights Reserved. Release Date : Apr.30.2014. Issue No: XXXXXXX www.everlightamericas.com DATASHEET SMD  REFLECTOR EAPL2214YA2 Moisture Resistant Packing Process Note: Tolerances unless mentioned ±0.1mm. Unit = mm Precautions for Use 1. Over-current-proof Customer must apply resistors for protection; otherwise slight voltage shift will cause big current change (Burn out will happen). 2. Storage 2.1 Do not open moisture proof bag before the products are ready to use. 2.2 Before opening the package, the LEDs should be kept at 30℃ or less and 90%RH or less. 2.3 After opening the package: The LED's floor life are 168 hours under 30℃ or less and 60% RH or less. If unused LEDs remain, it should be stored in moisture proof packages. 2.4 If the moisture absorbent material (silica gel) has faded away or the LEDs have exceeded the storage time, baking treatment should be performed using the following conditions. Baking treatment : 60±5℃ for 24 hours. 3. Soldering Condition 3.1 Pb-free solder temperature profile . 3.2 Reflow soldering should not be done more than two times. 3.3 When soldering, do not put stress on the LEDs during heating. 3.4 After soldering, do not warp the circuit board. 1~5 °C / Sec. 260°C. Max. 10 Sec. Max. 1~5 °C / Sec. Pre-heating 180~200°C 60 Sec. Max. Above 220°C 120 Sec. Max. 8 Copyright © 2010, Everlight Americas All Rights Reserved. Release Date : Apr.30.2014. Issue No: XXXXXXX www.everlightamericas.com DATASHEET SMD  REFLECTOR EAPL2214YA2 4. Soldering Iron Each terminal is to go to the tip of soldering iron temperature less than 280℃ for 3 seconds within once in less than the soldering iron capacity 25W. Leave two seconds and more intervals, and do soldering of each terminal. Be careful because the damage of the product is often started at the time of the hand solder. 5. Repairing Repair should not be done after the LEDs have been soldered. When repairing is unavoidable, a double-head soldering iron should be used (as below figure). It should be confirmed beforehand whether the characteristics of the LEDs will or will not be damaged by repairing. 9 Copyright © 2010, Everlight Americas All Rights Reserved. Release Date : Apr.30.2014. Issue No: XXXXXXX www.everlightamericas.com