EAPL3527GA1-AM

SMD  Power Top View LEDs EAPL3527GA1-AM PRELIMINARY Features P-LCC-3 package. Colorless clear resin. o Wide viewing angle 120 . Inner reflector and white package. Brightness: 56 to 140mcd at 50mA Precondition: Bases on JEDEC J-STD 020D Level 2 Qualification according to AEC-Q101 rev C. Automotive reflow profile (IR reflow or wave soldering) Applications Automotive backlighting or indicator: Dashboard, switch, audio and video equipments…etc. Backlight: LCD, switches, symbol, mobile phone and illuminated advertising. Display for indoor and outdoor application. Ideal for coupling into light guides. Substitution of traditional light. Optical indicator. 1 Copyright © 2010, Everlight Americas Inc. All Rights Reserved. Release Date : 08.May.2014. Issue No: 1 www.everlightamericas.com DATASHEET SMD  Power Top View LEDs EAPL3527GA1-AM Device Selection Guide Chip Materials AlGaInP Emitted Color Resin Color Pale Green Water Clear Absolute Maximum Ratings (Ta=25℃) Parameter Symbol Rating Unit Reverse Voltage VR 12 V Forward Current IF 50 mA IFP 100 mA Power Dissipation Pd 120 mW Junction Temperature Tj 125 ℃ Topr -40 ~ +100 ℃ Tstg -40 ~ +110 ℃ Rth J-A 500 K/W Rth J-S 300 K/W ESD ESDHBM 2000 V (Classification acc. AEC Q101) ESDMM 200 V Soldering Temperature Tsol Peak Forward Current (Duty 1/10 @1KHz) Operating Temperature Storage Temperature Thermal Resistance 2 Reflow Soldering : 260 ℃ for 30 sec. Hand Soldering : 350 ℃ for 3 sec. Copyright © 2010, Everlight Americas Inc. All Rights Reserved. Release Date : 08.May.2014. Issue No: 1 www.everlightamericas.com DATASHEET SMD  Power Top View LEDs EAPL3527GA1-AM Electro-Optical Characteristics (Ta=25℃) Parameter Symbol Min. Typ. Max. Luminous Intensity Iv 56 ----- 140 mcd IF=50mA Viewing Angle 2θ1/2 ----- 120 ----- deg IF=50mA Peak Wavelength λp ----- 561 ----- nm IF=50mA Dominant Wavelength λd 559 ---- 568 nm IF=50mA Spectrum Radiation Bandwidth ∆λ ----- 25 ----- nm IF=50mA Forward Voltage VF IR 1.7 ---- 2.4 V IF=50mA ----- ----- 10 μA VR=12V Reverse Current Unit Condition Note: 1. Tolerance of Luminous Intensity: ±11% 2. Tolerance of Dominant Wavelength: ±1nm 3. Tolerance of Forward Voltage: ±0.1V Bin Range of Luminous Intensity Bin Code Min. Max. Unit Condition P2 Q1 Q2 R1 56 71 90 112 71 90 112 140 mcd IF =50mA Note: Tolerance of Luminous Intensity: ±11% Bin Range of Dominant Wavelength Bin Code Min. Max. Unit Condition 1 2 3 559 562 565 562 565 568 nm IF =50mA Note: Tolerance of Dominant Wavelength: ±1nm 3 Copyright © 2010, Everlight Americas Inc. All Rights Reserved. Release Date : 08.May.2014. Issue No: 1 www.everlightamericas.com DATASHEET SMD  Power Top View LEDs EAPL3527GA1-AM Bin Range of Forward Voltage Bin Code Min. Max. Unit Condition 1 2 3 4 5 6 7 1.7 1.8 1.9 2.0 2.1 2.2 2.3 1.8 1.9 2.0 2.1 2.2 2.3 2.4 V IF =50mA Note: Tolerance of Forward Voltage：±0.05V 4 Copyright © 2010, Everlight Americas Inc. All Rights Reserved. Release Date : 08.May.2014. Issue No: 1 www.everlightamericas.com DATASHEET SMD  Power Top View LEDs EAPL3527GA1-AM Typical Electro-Optical Characteristics Curves Relative Intensity (%) Typical Curve of Spectral Distribution λp (nm) Note: V(λ)=Standard eye response curve; IF =50mA Relative Intensity (%) Diagram Characteristics of Radiation Relative Intensity 5 Copyright © 2010, Everlight Americas Inc. All Rights Reserved. Release Date : 08.May.2014. Issue No: 1 www.everlightamericas.com DATASHEET SMD  Power Top View LEDs EAPL3527GA1-AM Dominant Wavelength vs. Forward Current (Ta=25℃) Forward Current (mA) Dominant Wavelength (nm) Forward Current vs. Forward Voltage (Ta=25℃) Forward Voltage (V) Relative Luminous Intensity vs. Forward Current Max. Permissible Forwarded Current(Ta=25 ) Forward Current (mA) Relative Luminous Intensity (Ta=25℃) Forward Current (mA) Forward Current (mA) 6 Copyright © 2010, Everlight Americas Inc. All Rights Reserved. Release Date : 08.May.2014. Issue No: 1 Temperature ( ) www.everlightamericas.com DATASHEET SMD  Power Top View LEDs EAPL3527GA1-AM Package Dimension Note: Tolerances unless mentioned ±0.1mm. Unit = mm 7 Copyright © 2010, Everlight Americas Inc. All Rights Reserved. Release Date : 08.May.2014. Issue No: 1 www.everlightamericas.com DATASHEET SMD  Power Top View LEDs EAPL3527GA1-AM Moisture Resistant Packing Materials Label Explanation ‧CPN: Customer’s Product Number ‧P/N: Product Number ‧QTY: Packing Quantity ‧CAT: Luminous Intensity Rank ‧HUE: Dom. Wavelength Rank ‧REF: Forward Voltage Rank ‧LOT No: Lot Number Reel Dimensions Carrier Tape Dimensions: Loaded Quantity 2000 pcs Per Reel Note: Tolerances unless mentioned ±0.1mm. Unit = mm 8 Copyright © 2010, Everlight Americas Inc. All Rights Reserved. Release Date : 08.May.2014. Issue No: 1 www.everlightamericas.com DATASHEET SMD  Power Top View LEDs EAPL3527GA1-AM Moisture Resistant Packing Process Note: Tolerances unless mentioned ±0.1mm. Unit = mm Precautions for Use 1. Soldering Condition (Reference: IPC/JEDEC J-STD-020D) 1.1 (A) Maximum Body Case Temperature Profile for evaluation of Reflow Profile 300 Temperature(℃) max. 260℃ 245℃ 255℃ 240℃ 217℃ 250 200 max. 30s 150 max. 100s max. 120s 100 max. Ramp Up 3 ℃ /s 50 max. Ramp Down 6 ℃ /s 0 0 50 100 150 200 250 300 Times(s) (B)Recommend soldering pad Note: Tolerances unless mentioned ±0.1mm. Unit = mm 9 Copyright © 2010, Everlight Americas Inc. All Rights Reserved. Release Date : 08.May.2014. Issue No: 1 www.everlightamericas.com DATASHEET SMD  Power Top View LEDs EAPL3527GA1-AM 2. Current limiting A resistor should be used to limit current spikes that can be caused by voltage fluctuations. Otherwise damage could occur. 3. Storage 3.1 Moisture proof bag should only be opened immediately prior to usage. 3.2 Environment should be less than 30 and 60% RH when moisture proof bag is opened. 3.3 After opening the package MSL Conditions stated on page 1 of this spec should not be exceeded. 3.4 If the moisture sensitivity card indicates higher than acceptable moisture, the component should be baked at min. 60deg +/-5deg for 24 hours. 4. Iron Soldering Hand soldering is not recommended for regular production. These guidelines are for rework only. Soldering iron tip should contact each terminal no more than 3 sec at 350 , using soldering iron with nominal power less than 25W. Allow min. 2 sec. between soldering intervals. 5. Usage Do not exceed the values given in this specification. Application Restrictions High reliability applications such as military/aerospace, automotive safety/security systems, and medical equipment may require different product. If you have any concerns, please contact Everlight before using this product in your application. This specification guarantees the quality and performance of the product as an individual component. Do not use this product beyond the specification described in this document. Revision History 10 Rev. Modified date File modified contents 1 2014/05/08 New Spec Copyright © 2010, Everlight Americas Inc. All Rights Reserved. Release Date : 08.May.2014. Issue No: 1 www.everlightamericas.com