EAPL3527RA0-AM

SMD  TOP View LEDs EAPL3527RA0-AM PRELIMINARY Features ․P-LCC-2 package. ․White package. ․Optical indicator. ․Colorless clear window. ․Wide viewing angle. ․Suitable for vapor-phase reflow, Infrared reflow and wave solder processes. ․Computable with automatic placement equipment. ․Available on tape and reel (8mm Tape). ․Pb-free ․The product itself will remain within RoHS compliant version. Description This series is available in soft orange, green,blue and yellow. Due to the package design, the LED has wide viewing angle and optimized light coupling by inter reflector. This feature makes ideal for light pipe application. The low current requirement makes this device ideal for portable equipment or any other application where power is at a premium. Applications • Automotive: backlighting in dashboard and switch. • Telecommunication: indicator and backlighting in telephone and fax. • Flat backlight for LCD, switch and symbol. • Light pipe application. • General use. 1 Copyright © 2010, Everlight Americas Inc. All Rights Reserved. Release Date : 30.04.2014. Issue No: 1 www.everlightamericas.com DATASHEET SMD  TOP View LEDs EAPL3527RA0-AM Device Selection Guide Chip Materials AlGaInP Emitted Color Resin Color Dark Red Water Clear Absolute Maximum Ratings (Ta=25℃) Parameter Symbol Rating Unit Reverse Voltage VR 5 V Forward Current IF 30 mA IFP 60 mA Power Dissipation Pd 60 mW Junction Temperature Tj 115 ℃ Operating Temperature Topr -40 ~ +100 ℃ Tstg -40 ~ +110 ℃ Rth J-A 500 K/W Rth J-S 300 K/W ESD ESDHBM 2000 V (Classification acc. AEC Q101) ESDMM 200 V Soldering Temperature Tsol Peak Forward Current (Duty 1/10 @1KHz) Storage Temperature Thermal Resistance 2 Reflow Soldering : 260 ℃ for 30 sec. Hand Soldering : 350 ℃ for 3 sec. Copyright © 2010, Everlight Americas Inc. All Rights Reserved. Release Date : 30.04.2014. Issue No: 1 www.everlightamericas .com DATASHEET SMD  TOP View LEDs EAPL3527RA0-AM Electro-Optical Characteristics (Ta=25℃) Parameter Symbol Min. Typ. Max. Unit Condition Luminous Intensity Iv 112 ----- 224 mcd IF=20mA Viewing Angle 2θ1/2 ----- 120 ----- deg IF=20mA Peak Wavelength λp ----- 639 ----- nm IF=20mA Dominant Wavelength λd 627 ---- 639 nm IF=20mA Spectrum Radiation Bandwidth Δλ ----- 20 ----- nm IF=20mA Forward Voltage VF 1.75 ---- 2.35 V IF=20mA Reverse Current IR ----- ----- 50 μA VR=5V Note: 1. Tolerance of Luminous Intensity: ±11% 2. Tolerance of Dominant Wavelength: ±1nm 3. Tolerance of Forward Voltage: ±0.1V 3 Copyright © 2010, Everlight Americas Inc. All Rights Reserved. Release Date : 30.04.2014. Issue No: 1 www.everlightamericas .com DATASHEET SMD  TOP View LEDs EAPL3527RA0-AM Bin Range of Luminous Intensity Bin Code Min. Max. Unit Condition R1 R2 S1 112 140 180 140 180 224 mcd IF =20mA Note: Tolerance of Luminous Intensity: ±11% Bin Range of Dominant Wavelength Bin Code Min. Max. Unit Condition 1 2 3 4 627 630 633 636 630 633 636 639 nm IF =20mA Note: Tolerance of Dominant Wavelength: ±1nm Bin Range of Forward Voltage Bin Code Min. Max. Unit Condition 0 1 2 1.75 1.95 2.15 1.95 2.15 2.35 V IF =20mA Note: Tolerance of Forward Voltage: ±0.1V 4 Copyright © 2010, Everlight Americas Inc. All Rights Reserved. Release Date : 30.04.2014. Issue No: 1 www.everlightamericas .com DATASHEET SMD  TOP View LEDs EAPL3527RA0-AM Typical Electro-Optical Characteristics Curves Forward Current vs. Forward Voltage Ta=25¢X C 100 Forward Current I F (mA) Relative luminous intensity (%) Spectrum Distribution 75 50 25 40 30 25 20 10 0 500 550 600 650 Wavelength £f(nm) 0 1.2 700 Forward Current 1000 Relative luminous intensity (%) Relative luminous intensity (%) Ambient Temperature 100 10 1 -60 -40 -20 0 1.6 2.0 2.4 2.8 3.0 Forward Voltage VF (V) Rel. Luminous Intensity vs. Rel. Luminous Intensity vs. 20 40 60 80 100 Ta=25¢X C 1000 100 10 1 0 10 10 1 10 2 Forward Current IF (mA) Ambient Temperature Ta (¢X C) Forward Current Derating Curve Forward Current IF (mA) Ta=25¢X C 50 Radiation Diagram Ta=25¢X C 0¢X 10¢X 20¢X 50 30¢X 40 40¢X 30 25 1.0 0.9 50¢X 20 0.8 60¢X 10 0.7 0 0 20 40 60 85 100 70¢X 80¢X 90¢X 0.5 0.3 0.1 0.2 0.4 0.6 Ambient Temperature Ta (¢X C) 5 Copyright © 2010, Everlight Americas Inc. All Rights Reserved. Release Date : 30.04.2014. Issue No: 1 www.everlightamericas .com DATASHEET SMD  TOP View LEDs EAPL3527RA0-AM Package Dimension Note: Tolerances unless mentioned ±0.1mm. Unit = mm 6 Copyright © 2010, Everlight Americas Inc. All Rights Reserved. Release Date : 30.04.2014. Issue No: 1 www.everlightamericas .com DATASHEET SMD  TOP View LEDs EAPL3527RA0-AM Moisture Resistant Packing Materials Label Explanation ‧CPN: Customer’s Product Number ‧P/N: Product Number ‧QTY: Packing Quantity ‧CAT: Luminous Intensity Rank ‧HUE: Dom. Wavelength Rank ‧REF: Forward Voltage Rank ‧LOT No: Lot Number Reel Dimensions Carrier Tape Dimensions: Loaded Quantity 2000 pcs Per Reel Note: Tolerances unless mentioned ±0.1mm. Unit = mm 7 Copyright © 2010, Everlight Americas Inc. All Rights Reserved. Release Date : 30.04.2014. Issue No: 1 www.everlightamericas .com DATASHEET SMD  TOP View LEDs EAPL3527RA0-AM Moisture Resistant Packing Process Note: Tolerances unless mentioned ±0.1mm. Unit = mm Precautions for Use 1. Soldering Condition 1.1 (A) Maximum Body Case Temperature Profile for evaluation of Reflow Profile Note: Preheat Temperature min (Tsmin) Temperature max (Tsmax) Time (Tsmin to Tsmax) (ts) Average ramp-up rate (Tsmax to Tp) Other Liquidus Temperature (TL) Time above Liquidus Temperature (t L) Peak Temperature (TP) Time within 5 °C of Actual Peak Temperature: TP - 5°C 8 Reference: IPC/JEDEC J-STD-020D 150 °C 200°C 60-120 seconds 3 °C/second max 217 °C 60-150 sec 260°C 30 s Copyright © 2010, Everlight Americas Inc. All Rights Reserved. Release Date : 30.04.2014. Issue No: 1 www.everlightamericas .com DATASHEET SMD  TOP View LEDs EAPL3527RA0-AM Ramp- Down Rate from Peak Temperature 6°C /second max. Time 25°C to peak temperature 8 minutes max. Reflow times 3 times All parameters are maximum body case temperature values and cannot be considered as a soldering profile. The body temperature was measured by soldering a thermal couple to the soldering point of LEDs. (B) Recommend soldering pad Note: Tolerances unless mentioned ±0.1mm. Unit = mm 2. Current limiting A resistor should be used to limit current spikes that can be caused by voltage fluctuations. Otherwise damage could occur. 3. Storage 3.1 Moisture proof bag should only be opened immediately prior to usage. 3.2 Environment should be less than 30℃ and 90% RH when moisture proof bag is opened. 3.3 After opening the package MSL Conditions stated on page 1 of this spec should not be exceeded. 3.4 If the moisture sensitivity card indicates higher than acceptable moisture, the component should be baked at min. 60deg +/-5deg for 25 hours. 4. Iron Soldering Hand soldering is not recommended for regular production. These guidelines are for rework only. Soldering iron tip should contact each terminal no more than 3 sec at 350℃, using soldering iron with nominal power less than 25W. Allow min. 2 sec. between soldering intervals. 5. Usage Do not exceed the values given in this specification. Application Restrictions High reliability applications such as military/aerospace, automotive safety/security systems, and medical equipment may require different product. If you have any concerns, please contact Everlight before using this product in your application. This specification guarantees the quality and performance of the product as an individual component. Do not use this product beyond the specification described in this document. 9 Copyright © 2010, Everlight Americas Inc. All Rights Reserved. Release Date : 30.04.2014. Issue No: 1 www.everlightamericas .com DATASHEET SMD  TOP View LEDs EAPL3527RA0-AM Revision History 10 Rev. Modified date File modified contents 1 2014/4/30 New Spec Copyright © 2010, Everlight Americas Inc. All Rights Reserved. Release Date : 30.04.2014. Issue No: 1 www.everlightamericas .com