EAPL3527RA8

SMD  Power Top View LED EAPL3527RA8 PRELIMINARY Features ˙P-LCC-3 package. ․High flux output. ․High current capability. ․White package. ․Optical indicator. ․Colorless clear window. ․Ideal for backlight and light pipe application. ․Inter reflector. ․Wide viewing angle. ․Suitable for automatic placement equipment. ․Suitable for reflow and wave solder processes. ․Available on tape and reel (8mm Tape). ․Pb-free. ․The product itself will remain within RoHS compliant version. Descriptions ․This series is available in soft orange, red and yellow. Due to the package design, the LED has wide viewing angle and optimized light coupling by inter reflector. ․This feature makes the ideal for light pipe application. The low current requirement makes this device ideal for portable equipment or any other application where power is at a premium. Applications ․Indicator and backlight for audio and video equipment. ․Indicator and backlight in office and family equipment. ․Flat backlight for LCD’s, switches and symbols. ․Light pipe application. 1 Copyright © 2010, Everlight Americas Inc. All Rights Reserved. Release Date : 08.May.2014. Issue No: 1 www.everlightamericas.com DATASHEET SMD  Power Top View LED EAPL3527RA8 Device Selection Guide Chip Materials AlGaInP Emitted Color Resin Color Brilliant Red Water Clear Absolute Maximum Ratings (Ta=25℃) Parameter Symbol Rating Unit Reverse Voltage VR 5 V Forward Current IF 50 mA IFP 100 mA Power Dissipation Pd 120 mW Junction Temperature Tj 115 ℃ Operating Temperature Topr -40 ~ +85 ℃ Tstg -40 ~ +90 ℃ Rth J-A 500 K/W Rth J-S 300 K/W ESD ESDHBM 2000 V (Classification acc. AEC Q101) ESDMM 200 V Soldering Temperature Tsol Peak Forward Current (Duty 1/10 @1KHz) Storage Temperature Thermal Resistance 2 Reflow Soldering : 260 ℃ for 10 sec. Hand Soldering : 350 ℃ for 3 sec. Copyright © 2010, Everlight Americas Inc. All Rights Reserved. Release Date : 08.May.2014. Issue No: 1 www.everlightamericas .com DATASHEET SMD  Power Top View LED EAPL3527RA8 Electro-Optical Characteristics (Ta=25℃) Parameter Symbol Min. Typ. Max. Unit Condition Luminous Intensity Iv 715 ----- 1800 mcd IF=50mA Viewing Angle 2θ1/2 ----- 120 ----- deg IF=50mA Peak Wavelength λp ----- 632 ----- nm IF=50mA Dominant Wavelength λd 617.5 ---- 633.5 nm IF=50mA Spectrum Radiation Bandwidth Δλ ----- 20 ----- nm IF=50mA Forward Voltage VF 1.75 ---- 2.75 V IF=50mA Reverse Current IR ----- ----- 50 μA VR=5V Note: 1. Tolerance of Luminous Intensity: ±11% 2. Tolerance of Dominant Wavelength: ±1nm 3. Tolerance of Forward Voltage: ±0.1V 3 Copyright © 2010, Everlight Americas Inc. All Rights Reserved. Release Date : 08.May.2014. Issue No: 1 www.everlightamericas .com DATASHEET SMD  Power Top View LED EAPL3527RA8 Bin Range of Luminous Intensity Bin Code Min. Max. Unit Condition V1 V2 W1 W2 715 900 1120 1420 900 1120 1420 1800 mcd IF =50mA Note: Tolerance of Luminous Intensity: ±11% Bin Range of Dominant Wavelength Bin Code Min. Max. Unit Condition E4 E5 E6 E7 617.5 621.5 625.5 629.5 621.5 625.5 629.5 633.5 nm IF =50mA Note: Tolerance of Dominant Wavelength: ±1nm Bin Range of Forward Voltage Bin Code Min. Max. Unit Condition 0 1 2 3 4 1.75 1.95 2.15 2.35 2.55 1.95 2.15 2.35 2.55 2.75 V IF =50mA Note: Tolerance of Forward Voltage: ±0.1V 4 Copyright © 2010, Everlight Americas Inc. All Rights Reserved. Release Date : 08.May.2014. Issue No: 1 www.everlightamericas .com DATASHEET SMD  Power Top View LED EAPL3527RA8 Typical Electro-Optical Characteristics Curves 5 Copyright © 2010, Everlight Americas Inc. All Rights Reserved. Release Date : 08.May.2014. Issue No: 1 www.everlightamericas .com DATASHEET SMD  Power Top View LED EAPL3527RA8 Package Dimension Note: Tolerances unless mentioned ±0.1mm. Unit = mm 6 Copyright © 2010, Everlight Americas Inc. All Rights Reserved. Release Date : 08.May.2014. Issue No: 1 www.everlightamericas .com DATASHEET SMD  Power Top View LED EAPL3527RA8 Moisture Resistant Packing Materials Label Explanation ‧CPN: Customer’s Product Number ‧P/N: Product Number ‧QTY: Packing Quantity ‧CAT: Luminous Intensity Rank ‧HUE: Dom. Wavelength Rank ‧REF: Forward Voltage Rank ‧LOT No: Lot Number Reel Dimensions Carrier Tape Dimensions: Loaded Quantity 2000 pcs Per Reel Note: Tolerances unless mentioned ±0.1mm. Unit = mm 7 Copyright © 2010, Everlight Americas Inc. All Rights Reserved. Release Date : 08.May.2014. Issue No: 1 www.everlightamericas .com DATASHEET SMD  Power Top View LED EAPL3527RA8 Moisture Resistant Packing Process Note: Tolerances unless mentioned ±0.1mm. Unit = mm Precautions for Use 1. Over-current-proof 1.1 Customer must apply resistors for protection, otherwise slight voltage shift will cause big current change ( Burn out will happen ). 260¢X C Max. 10sec. Max. Above255¢X C 30sec.Max. 3¢X C/sec.Max. 6¢X C/sec.Max. Pre-heating Above 217¢X C 60~150sec. 150~200¢X C 60~120sec. 2. Storage 2.1 Moisture proof bag should only be opened immediately prior to usage. 2.2 Environment should be less than 30℃ and 60% RH when moisture proof bag is opened. 2.3 After opening the package MSL Conditions stated on page 1 of this spec should not be exceeded. 2.4 If the moisture sensitivity card indicates higher than acceptable moisture, the component should be baked at min. 60deg +/-5deg for 24 hours. 3. Soldering Condition 3.1 Pb-free solder temperature profile 3.2 Reflow soldering should not be done more than two times. 3.3 When soldering, do not put stress on the LEDs during heating. 3.4 After soldering, do not warp the circuit board. 4. Soldering Iron Each terminal is to go to the tip of soldering iron temperature less than 350℃ for 3 seconds within once in less than the soldering iron capacity 25W. Leave two seconds and more intervals, and do soldering of each terminal. Be 8 Copyright © 2010, Everlight Americas Inc. All Rights Reserved. Release Date : 08.May.2014. Issue No: 1 www.everlightamericas .com DATASHEET SMD  Power Top View LED EAPL3527RA8 careful because the damage of the product is often started at the time of the hand solder. 5. Repairing Repair should not be done after the LEDs have been soldered. When repairing is unavoidable, a double-head soldering iron should be used (as below figure). It should be confirmed beforehand whether the characteristics of the LEDs will or will not be damaged by repairing. Application Restrictions High reliability applications such as military/aerospace, automotive safety/security systems, and medical equipment may require different product. If you have any concerns, please contact Everlight before using this product in your application. This specification guarantees the quality and performance of the product as an individual component. Do not use this product beyond the specification described in this document. Revision History 9 Rev. Modified date File modified contents 1 2014/05/08 New Spec Copyright © 2010, Everlight Americas Inc. All Rights Reserved. Release Date : 08.May.2014. Issue No: 1 www.everlightamericas .com