EAPL3527YA0-AM

SMD  Top View LEDs EAPL3527YA0-AM PRELIMINARY Features ‧ P-LCC-2 package. ‧ Colorless clear resin. o ‧ Wide viewing angle 120 . ‧ Inner reflector and white package. ‧ Brightness: 450 to 710 mcd at 20mA. ‧ Precondition: Bases on JEDEC J-STD 020D Level 3. ‧ Qualification according to AEC-Q101 rev C. ‧ Automotive reflow profile (IR reflow or wave soldering) Applications ‧ Automotive backlighting or indicator: Dashboard, switch, audio and video equipments…etc. ‧ Backlight: LCD, switches, symbol, mobile phone and illuminated advertising. ‧ Display for indoor and outdoor application. ‧ Ideal for coupling into light guides. ‧ Substitution of traditional light. ‧ Optical indicator. ‧ General applications. 1 Copyright © 2010, Everlight Americas All Rights Reserved. Release Date : Apr.30.2014. Issue No: XXXXXXX www.everlightamericas.com DATASHEET SMD  Top View LEDs EAPL3527YA0-AM Device Selection Guide Chip Materials AlGaInP Emitted Color Resin Color Brilliant Yellow Water Clear Absolute Maximum Ratings (Ta=25℃) Parameter Symbol Rating Unit Reverse Voltage VR 5 V Forward Current IF 50 mA IFP 100 mA Power Dissipation Pd 95 mW Junction Temperature Tj 125 ℃ Operating Temperature Topr -40 ~ +100 ℃ Storage Temperature Tstg -40 ~ +110 ℃ Rth J-A 500 K/W Rth J-S 300 K/W ESDHBM 2000 V ESDMM 200 V Peak Forward Current (Duty 1/10 @1KHz) Thermal resistance ESD (Classification acc. AEC Q101) Reflow Soldering : 260 ℃ for 30 sec. Soldering Temperature 2 Tsol Hand Soldering : 350 ℃ for 3 sec. Copyright © 2010, Everlight Americas All Rights Reserved. Release Date : Apr.30.2014. Issue No: XXXXXXX www.everlightamericas.com DATASHEET SMD  Top View LEDs EAPL3527YA0-AM Electro-Optical Characteristics (Ta=25℃) Parameter Symbol Min. Typ. Max. Unit Condition Luminous Intensity Iv 450 --- 710 mcd IF=20mA Viewing Angle 2θ1/2 --- 120 --- deg IF=20mA Peak Wavelength λp --- 591 --- nm IF=20mA Dominant Wavelength λd 588 --- 594 nm IF=20mA Spectrum Radiation Bandwidth Δλ --- 15 --- nm IF=20mA Forward Voltage VF 1.7 --- 2.6 V IF=20mA Reverse Current IR --- --- 10 μA VR=5V Note: 1. Tolerance of Luminous Intensity: ±11% 2. Tolerance of Dominant Wavelength: ±1nm 3. Tolerance of Forward Voltage: ±0.1V Bin Range of Luminous Intensity Bin Code Min. Max. U1 450 560 U2 560 Unit Condition mcd IF =20mA 710 Note: Tolerance of Luminous Intensity: ±11% 3 Copyright © 2010, Everlight Americas All Rights Reserved. Release Date : Apr.30.2014. Issue No: XXXXXXX www.everlightamericas.com DATASHEET SMD  Top View LEDs EAPL3527YA0-AM Bin Range of Dominant Wavelength Bin Code Min. Max. 1 588 591 2 591 594 Unit Condition nm IF =20mA Note: Tolerance of Dominant Wavelength: ±1nm 4 Copyright © 2010, Everlight Americas All Rights Reserved. Release Date : Apr.30.2014. Issue No: XXXXXXX www.everlightamericas.com DATASHEET SMD  Top View LEDs EAPL3527YA0-AM Typical Electro-Optical Characteristics Curves Typical Curve of Spectral Distribution 100 Relative Intensity (%) Relative Intensity (%) V(λ ) Y9N YS 50 0 400 450 500 550 600 650 700 Wp (n m) λp (nm) Note: V(λ)=Standard eye response curve Diagram Characteristics of Radiation 20 o 10 o 0 o 1.0 o 30 40 o 0.8 o Angle View Angle View 50 60 70 80 90 0.6 o 0.4 o 0.2 o o 0 1.0 0.8 0.6 0.4 Relative Intensity 5 0.2 0 Relative Intensity o 20 40 o 60 o 80 o View Angle Copyright © 2010, Everlight Americas All Rights Reserved. Release Date : Apr.30.2014. Issue No: XXXXXXX www.everlightamericas.com DATASHEET SMD  Top View LEDs EAPL3527YA0-AM Forward Current vs. Forward Voltage Dominant Wavelength vs. Forward Current (Ta=25℃) (Ta=25℃) 472 Dominant Wavelength (nm) Forward Current (mA) 100 10 471 470 469 1 0 10 20 30 40 50 60 70 80 90 100 2.5 2.6 2.7 2.8 2.9 3.0 3.1 3.2 3.3 3.4 3.5 Forward Voltage (V) Forward Current (mA) Relative Luminous Intensity vs. Forward current vs. Ambient and Solder Forward Current (Ta=25℃) Temperature 35.0 1.00 0.10 TA 25.0 20.0 15.0 10.0 5.0 0.01 0.0 1 10 Forward Current (mA) 6 TS 30.0 Forward Current (mA) Relative Luminous Intensity 10.00 100 0.0 20.0 40.0 60.0 80.0 100.0 Temperature (℃) Copyright © 2010, Everlight Americas All Rights Reserved. Release Date : Apr.30.2014. Issue No: XXXXXXX www.everlightamericas.com DATASHEET SMD  Top View LEDs EAPL3527YA0-AM Package Dimension Note: Tolerances unless mentioned ±0.1mm. Unit = mm 7 Copyright © 2010, Everlight Americas All Rights Reserved. Release Date : Apr.30.2014. Issue No: XXXXXXX www.everlightamericas.com DATASHEET SMD  Top View LEDs EAPL3527YA0-AM Moisture Resistant Packing Materials Label Explanation ‧CPN: Customer’s Product Number ‧P/N: Product Number ‧QTY: Packing Quantity ‧CAT: Luminous Intensity Rank ‧HUE: Dom. Wavelength Rank ‧REF: Forward Voltage Rank ‧LOT No: Lot Number Reel Dimensions La bel La be Carrier Tape Dimensions: Loaded Quantity 2000 pcs Per Reel Note: Tolerances unless mentioned ±0.1mm. Unit = mm 8 Copyright © 2010, Everlight Americas All Rights Reserved. Release Date : Apr.30.2014. Issue No: XXXXXXX www.everlightamericas.com DATASHEET SMD  Top View LEDs EAPL3527YA0-AM Moisture Resistant Packing Process Note: Tolerances unless mentioned ±0.1mm. Unit = mm Precautions for Use 1. Soldering Condition (Reference: IPC/JEDEC J-STD-020D) a. IR reflow 300 Temperature(℃) max. 260℃ 245℃ 255℃ 240℃ 217℃ 250 200 max. 30s 150 max. 100s max. 120s 100 max. Ramp Down 6 ℃/s max. Ramp Up 3 ℃/s 50 0 0 50 100 150 200 250 300 Times(s) b. Wave soldering reflow 300 5 sec Max. o 260 C 200 o Temperature( C) 250 150 60 sec Max. 100 50 0 0 10 20 30 40 50 60 70 80 90 Time(s) 9 Copyright © 2010, Everlight Americas All Rights Reserved. Release Date : Apr.30.2014. Issue No: XXXXXXX www.everlightamericas.com DATASHEET SMD  Top View LEDs EAPL3527YA0-AM (B) Recommend soldering pad Note: Tolerances unless mentioned ±0.1mm. Unit = mm 2. Current limiting A resistor should be used to limit current spikes that can be caused by voltage fluctuations. Otherwise damage could occur. 3. Storage 3.1 Moisture proof bag should only be opened immediately prior to usage. 3.2 Environment should be less than 30℃ and 60% RH when moisture proof bag is opened. 3.3 After opening the package MSL Conditions stated on page 1 of this spec should not be exceeded. 3.4 If the moisture sensitivity card indicates higher than acceptable moisture, the component should be baked at min. 60deg +/-5deg for 24 hours. 4. Iron Soldering Hand soldering is not recommended for regular production. These guidelines are for rework only. Soldering iron tip should contact each terminal no more than 3 sec at 350℃, using soldering iron with nominal power less than 25W. Allow min. 2 sec. between soldering intervals. 5. Usage Do not exceed the values given in this specification. 10 Copyright © 2010, Everlight Americas All Rights Reserved. Release Date : Apr.30.2014. Issue No: XXXXXXX www.everlightamericas.com