EAPL3528RYA0

SMD  Full Color Top View LEDs EAPL3528RYA0 PRELIMINARY Features ․P-LCC-4 package. ․White package. ․Optical indicator. ․Colorless clear window. ․Ideal for backlight and light pipe application. ․Inter reflector. ․Wide viewing angle. ․Suitable for vapor-phase reflow. ․Computable with automatic placement equipment. ․Available on tape and reel (8mm Tape). ․Pb-free. ․The product itself will remain within RoHS compliant version. ․Precondition: Bases on JEDEC J-STD 020D Level 3 Description The 67-22 series is available in soft red, green,blue and yellow. Due to the package design, the LED has wide viewing angle and optimized light coupling by inter reflector. This feature makes the ideal for light pipe application. The low current requirement makes this device ideal for portable equipment or any other application where power is at a premium. Applications ․Telecommunication: indicator and backlighting in telephone and fax. ․Flat backlight for LCD’s, switches and symbols. ․Light pipe application. ․General use. 1 Copyright © 2010, Everlight Americas Inc. All Rights Reserved. Release Date : 30.04.2014. Issue No: 1 www.everlightamericas.com DATASHEET SMD  TOP View LEDs EAPL3528RYA0 Device Selection Guide Chip Emitted Color Resin Color AlGaInP Brilliant Red Water Clear AlGaInP Brilliant Yellow Water Clear Materials Absolute Maximum Ratings (Ta=25℃) Parameter Symbol Rating Unit Reverse Voltage VR 5 V Forward Current IF 30 mA IFP 60 mA Power Dissipation Pd 60 mW Junction Temperature Tj 115 ℃ Operating Temperature Topr -40 ~ +85 ℃ Storage Temperature Tstg -40 ~ +90 ℃ Rth J-A 500 K/W Rth J-S 300 K/W ESD ESDHBM 2000 V (Classification acc. AEC Q101) ESDMM 200 V Soldering Temperature Tsol Peak Forward Current (Duty 1/10 @1KHz) Thermal Resistance 2 Reflow Soldering : 260 ℃ for 10 sec. Hand Soldering : 350 ℃ for 3 sec. Copyright © 2010, Everlight Americas Inc. All Rights Reserved. Release Date : 30.04.2014. Issue No: 1 www.everlightamericas .com DATASHEET SMD  TOP View LEDs EAPL3528RYA0 Electro-Optical Characteristics (Ta=25℃) Parameter Symbol Luminous Intensity Iv Viewing Angle 2θ1/2 Peak Wavelength λp Dominant Wavelength Spectrum Radiation Bandwidth Forward Voltage Reverse Current λd Δλ VF IR Min. Typ. Max. Unit Condition R6 72 ----- 285 Y2 72 ----- 285 mcd IF=20mA ----- 120 ----- deg IF=20mA R6 ----- 632 ----- Y2 ----- 591 ----- nm IF=20mA R6 621 ----- 631 Y2 586 ----- 594 nm IF=20mA R6 ----- 20 ----- Y2 ----- 15 ----- nm IF=20mA R6 1.75 ----- 2.35 Y2 1.75 ----- 2.35 V IF=20mA R6 ----- ----- 50 μA VR=5V Y2 ----- ----- 50 μA VR=5V Note: 1. Tolerance of Luminous Intensity: ±11% 2. Tolerance of Dominant Wavelength: ±1nm 3. Tolerance of Forward Voltage: ±0.1V 3 Copyright © 2010, Everlight Americas Inc. All Rights Reserved. Release Date : 30.04.2014. Issue No: 1 www.everlightamericas .com DATASHEET SMD  TOP View LEDs EAPL3528RYA0 Bin Range of Luminous Intensity Chip Bin Code Min. Max. Unit Condition R6/Y2 Q1 Q2 R1 R2 S1 S2 72 90 112 140 180 225 90 112 140 180 225 285 mcd IF =20mA Note: Tolerance of Luminous Intensity: ±11% Bin Range of Dominant Wavelength Chip R6 Y2 Bin Code Min. Max. Unit Condition FF1 FF2 DD1 DD2 DD3 DD4 621 626 586 588 590 592 626 631 588 590 592 594 nm IF =20mA Note: Tolerance of Dominant Wavelength: ±1nm Bin Range of Forward Voltage Chip R6S G6S Bin Code Min. Max. Unit Condition 0 1 2 0 1 2 1.75 1.95 2.15 1.75 1.95 2.15 1.95 2.15 2.35 1.95 2.15 2.35 V IF =20mA Note: Tolerance of Forward Voltage: ±0.1V 4 Copyright © 2010, Everlight Americas Inc. All Rights Reserved. Release Date : 30.04.2014. Issue No: 1 www.everlightamericas .com DATASHEET SMD  TOP View LEDs EAPL3528RYA0 Typical Electro-Optical Characteristics Curves Forward Current vs. Forward Voltage 75 50 25 0 550 50 40 30 20 10 0 600 650 700 Wavelength £f(nm) 750 1.4 2.0 2.2 Forward Current Ambient Temperature Relative luminous intensity (%) Relative luminous intensity (%) 1.8 2.4 Relative Luminous Intensity vs. 1000 100 10 1 -60 -40 -20 1.6 Forward Voltage VF (V) Relative Luminous Intensity vs. 0 20 40 60 80 100 Ta=25¢X C 1000 f=1KHz Duty=1/10 100 10 1 0 10 10 1 10 2 Forward Current IF (mA) Ambient Temperature Ta (¢X C) Radiation Diagram Ta=25¢X C 0¢X 10¢X 20¢X 30¢X Forward Current Derating Curve Forward Current IF (mA) Ta=25¢X C Ta=25¢X C 100 Forward Current IF (mA) Relative luminous intensity (%) Spectrum Distribution 40 30 40¢X 1.0 20 10 0.9 50¢X 0.8 60¢X 70¢X 0.7 0 20 40 60 85 100 80¢X 90¢X 0.5 0.3 0.1 0.2 0.4 0.6 Ambient Temperature Ta (¢X C) 5 Copyright © 2010, Everlight Americas Inc. All Rights Reserved. Release Date : 30.04.2014. Issue No: 1 www.everlightamericas .com DATASHEET SMD  TOP View LEDs EAPL3528RYA0 Typical Electro-Optical Characteristics Curves Forward Current vs. Forward Voltage Spectrum Distribution Ta=25¢X C 50 Forward Current I F (mA) Relative luminous intensity (%) 100 75 50 25 0 500 30 20 10 1.2 700 100 10 1 -60 -40 -20 0 20 40 60 80 100 2.0 3.0 f=1KHz Duty=1/10 100 10 1 0 10 Forward Current Derating Curve 2 1 10 10 Forward Current I F (mA) 3 10 Radiation Diagram Ta=25¢X C 0¢X 10¢X 20¢X 30¢X 50 Forward Current I (mA) F 2.8 1000 Ambient Temperature T a (¢X C) 40 30 40¢X 1.0 20 0.9 50¢X 0.8 60¢X 10 70¢X 0.7 0 6 2.4 Relative Luminous Intensity vs. Forward Current Ta=25¢X C Relative luminous intensity (%) 1000 1.6 Forward Voltage VF (V) Relative Luminous Intensity vs. Ambient Temperature Relative luminous intensity (%) 40 0 550 600 650 Wavelength £f(nm) Ta=25¢X C 20 40 60 80 100 Ambient Temperature Ta (¢X C) 80¢X 90¢X 0.5 0.3 0.1 0.2 0.4 0.6 Copyright © 2010, Everlight Americas Inc. All Rights Reserved. Release Date : 30.04.2014. Issue No: 1 www.everlightamericas .com DATASHEET SMD  TOP View LEDs EAPL3528RYA0 Package Dimension Note: Tolerances unless mentioned ±0.1mm. Unit = mm 7 Copyright © 2010, Everlight Americas Inc. All Rights Reserved. Release Date : 30.04.2014. Issue No: 1 www.everlightamericas .com DATASHEET SMD  TOP View LEDs EAPL3528RYA0 Moisture Resistant Packing Materials Label Explanation ‧CPN: Customer’s Product Number ‧P/N: Product Number ‧QTY: Packing Quantity ‧CAT: Luminous Intensity Rank ‧HUE: Dom. Wavelength Rank ‧REF: Forward Voltage Rank ‧LOT No: Lot Number Reel Dimensions Carrier Tape Dimensions: Loaded Quantity 2000 pcs Per Reel Note: Tolerances unless mentioned ±0.1mm. Unit = mm 8 Copyright © 2010, Everlight Americas Inc. All Rights Reserved. Release Date : 30.04.2014. Issue No: 1 www.everlightamericas .com DATASHEET SMD  TOP View LEDs EAPL3528RYA0 Moisture Resistant Packing Process Note: Tolerances unless mentioned ±0.1mm. Unit = mm Precautions for Use 1. Over-current-proof 1.1 Customer must apply resistors for protection, otherwise slight voltage shift will cause big current change ( Burn out will happen ). 260¢X C Max. 10sec. Max. Above255¢X C 30sec.Max. 3¢X C/sec.Max. 6¢X C/sec.Max. Pre-heating Above 217¢X C 60~150sec. 150~200¢X C 60~120sec. 2. Storage 2.1 Moisture proof bag should only be opened immediately prior to usage. 2.2 Environment should be less than 30℃ and 60% RH when moisture proof bag is opened. 2.3 After opening the package MSL Conditions stated on page 1 of this spec should not be exceeded. 2.4 If the moisture sensitivity card indicates higher than acceptable moisture, the component should be baked at min. 60deg +/-5deg for 24 hours. 3. Soldering Condition 3.1 Pb-free solder temperature profile 3.2 Reflow soldering should not be done more than two times. 3.3 When soldering, do not put stress on the LEDs during heating. 3.4 After soldering, do not warp the circuit board. 4. Soldering Iron Each terminal is to go to the tip of soldering iron temperature less than 350℃ for 3 seconds within once in less 9 Copyright © 2010, Everlight Americas Inc. All Rights Reserved. Release Date : 30.04.2014. Issue No: 1 www.everlightamericas .com DATASHEET SMD  TOP View LEDs EAPL3528RYA0 than the soldering iron capacity 25W. Leave two seconds and more intervals, and do soldering of each terminal. Be careful because the damage of the product is often started at the time of the hand solder. 5. Repairing Repair should not be done after the LEDs have been soldered. When repairing is unavoidable, a double-head soldering iron should be used (as below figure). It should be confirmed beforehand whether the characteristics of the LEDs will or will not be damaged by repairing. Application Restrictions High reliability applications such as military/aerospace, automotive safety/security systems, and medical equipment may require different product. If you have any concerns, please contact Everlight before using this product in your application. This specification guarantees the quality and performance of the product as an individual component. Do not use this product beyond the specification described in this document. Revision History 10 Rev. Modified date File modified contents 1 2014/4/30 New Spec Copyright © 2010, Everlight Americas Inc. All Rights Reserved. Release Date : 30.04.2014. Issue No: 1 www.everlightamericas .com