EAPL4040WA1

SMD  Side View LEDs EAPL4040WA1 PRELIMINARY Features ․Fluorescence Type ․High Luminous Intensity ․High Efficiency ․Pb-free. ․The product itself will remain within RoHS compliant version. ․ESD protection. Applications ․OA Equipment ․Backlighting of Full Color LCD ․Automotive Equipment ․Replacement of Conventional Light ․Bulbs and Fluorescent Lamps 1 Copyright © 2010, Everlight Americas All Rights Reserved. Release Date : Apr.30.2014. Issue No: XXXXXXX www.everlightamericas.com DATASHEET SMD  REFLECTOR EAPL4040WA1 Device Selection Guide Chip Materials InGaN Emitted Color Resin Color White Water Clear Absolute Maximum Ratings (Ta=25℃) Parameter Symbol Rating Unit Reverse Voltage VR 5 V Forward Current IF 30 mA IFP 100 mA Power Dissipation Pd 110 mW Electrostatic Discharge(HBM) ESD 2000 V Operating Temperature Topr -40 ~ +85 ℃ Storage Temperature Tstg -40 ~ +90 ℃ Peak Forward Current (Duty 1/10 @1KHz) Reflow Soldering : 260 ℃ for 10 sec. Soldering Temperature 2 Tsol Hand Soldering : 350 ℃ for 3 sec. Copyright © 2010, Everlight Americas All Rights Reserved. Release Date : Apr.30.2014. Issue No: XXXXXXX www.everlightamericas.com DATASHEET SMD  REFLECTOR EAPL4040WA1 Electro-Optical Characteristics (Ta=25℃) Parameter Symbol Min. Typ. Max. Units Condition Luminous Intensity IV 900 ----- 1800 mcd IF=20mA Viewing Angle 2θ1/2 -- 120 -- deg IF=20mA Forward Voltage VF 2.75 ----- 3.95 V IF=20mA Unit Condition mcd IF=20mA Unit Condition V IF=20mA Note: 1. Tolerance of Luminous Intensity: ±11% 2. Tolerance of Dominant Wavelength: ±1nm 3. Tolerance of Forward Voltage: ±0.1V Bin Range of Luminous Intensity Bin V2 W1 W2 Min 900 1120 1420 Max 1120 1420 1800 Note: Tolerance of Luminous Intensity: ±11% Bin Range Of Forward Voltage Group M Bin 5 6 7 8 Min 2.75 3.05 3.35 3.65 Max 3.05 3.35 3.65 3.95 Note: Tolerance of Forward Voltage ±0.1V 3 Copyright © 2010, Everlight Americas All Rights Reserved. Release Date : Apr.30.2014. Issue No: XXXXXXX www.everlightamericas.com DATASHEET SMD  REFLECTOR EAPL4040WA1 Bin Range Of Chromaticity Coordinates Bin Code 6K 7K CIE_x CIE_y 0.3130 0.3100 0.3300 0.3300 0.3300 0.3300 0.3380 0.3520 0.2840 0.2970 0.3300 0.3100 0.3100 0.3300 0.3420 0.3440 Bin Code 6L 7L CIE_x CIE_y 0.3100 0.3070 0.3300 0.3300 0.3300 0.3300 0.3470 0.3450 0.2970 0.3120 0.3470 0.3300 0.3300 0.3470 0.3710 0.3520 Notes: Tolerance of Chromaticity Coordinates: ±0.01 0.40 0.38 0.36 7L 0.34 y 7K 6L 0.32 6K 0.30 0.28 0.26 0.28 0.29 0.30 0.31 0.32 0.33 0.34 0.35 0.36 0.37 X 4 Copyright © 2010, Everlight Americas All Rights Reserved. Release Date : Apr.30.2014. Issue No: XXXXXXX www.everlightamericas.com DATASHEET SMD  REFLECTOR EAPL4040WA1 Typical Electro-Optical Characteristics Curves Forward Current vs. Forward Voltage Ta=25° 100 50 25 500 600 700 Wavelength λp(nm) 30 20 10 0 2.6 800 Ambient Temperature 1000 100 10 0 4.2 4.5 100 10 1 0 10 20 40 60 80 100 3 2 10 101 10 Forward Current IF (mA) Radiation Diagram Forward Current Derating Curve IF(mA) 3.8 1000 Ambient Temperature Ta(°C ) Forward Current 3.4 Luminous Intensity vs Forward Current Ta=25° Luminous Intensity vs. 1 -60 -40 -20 3.0 Forward Voltage( )-volts F Relative luminous intensity (% ) Relative luminous intensity (%) 0 400 Ta=25° 40 Forward Current 75 50 IF (mA) Relative luminous intensity (% ) Spectrum Distribution 0° 50 10° 20° Ta=25° 30° 40 30 1.0 20 0.9 0.8 10 0.7 0 0 20 40 60 80 100 40° 50° 60° 70° 80° 90° 0.5 0.3 0.1 0.2 0.4 0.6 Ambient Temperature Ta(°C ) 5 Copyright © 2010, Everlight Americas All Rights Reserved. Release Date : Apr.30.2014. Issue No: XXXXXXX www.everlightamericas.com DATASHEET SMD  REFLECTOR EAPL4040WA1 Package Dimension Note: Tolerances unless mentioned ±0.1mm. Unit = mm 6 Copyright © 2010, Everlight Americas All Rights Reserved. Release Date : Apr.30.2014. Issue No: XXXXXXX www.everlightamericas.com DATASHEET SMD  REFLECTOR EAPL4040WA1 Moisture Resistant Packing Materials Label Explanation Label explanation CAT: Luminous Intensity Rank HUE: Chromaticity Coordinates REF: Forward Voltage Rank Reel Dimensions Carrier Tape Dimensions: Loaded Quantity 500 pcs Per Reel Note: Tolerances unless mentioned ±0.1mm. Unit = mm 7 Copyright © 2010, Everlight Americas All Rights Reserved. Release Date : Apr.30.2014. Issue No: XXXXXXX www.everlightamericas.com DATASHEET SMD  REFLECTOR EAPL4040WA1 Moisture Resistant Packing Process Note: Tolerances unless mentioned ±0.1mm. Unit = mm Reliability Test Items And Conditions The reliability of products shall be satisfied with items listed below. Confidence level：90% LTPD：10% No. Items Test Condition 1 Reflow Soldering Temp. : 260℃±5℃ Min. 5sec. Test Sample Hours/Cycles Size 6 min 22 PCS. 0/1 300 Cycles 22 PCS. 0/1 300 Cycles 22 PCS. 0/1 Ac/Re H : +100℃ 15min 2 Temperature Cycle ∫ 5 min L : -40℃ 15min H : +100℃ 5min 3 Thermal Shock ∫ 10 sec L : -10℃ 5min 4 High Temperature Storage Temp. : 100℃ 1000 Hrs. 22 PCS. 0/1 5 Low Temperature Storage Temp. : -40℃ 1000 Hrs. 22 PCS. 0/1 6 DC Operating Life IF = 20 mA/ 25℃ 1000 Hrs. 22 PCS. 0/1 85℃/ 85%RH 1000 Hrs. 22 PCS. 0/1 7 8 High Temperature / High Humidity Copyright © 2010, Everlight Americas All Rights Reserved. Release Date : Apr.30.2014. Issue No: XXXXXXX www.everlightamericas.com DATASHEET SMD  REFLECTOR EAPL4040WA1 Precautions For Use 1. Over-current-proof Customer must apply resistors for protection, otherwise slight voltage shift will cause big current change ( Burn out will happen ). 2. Storage 2.1 Do not open moisture proof bag before the products are ready to use. 2.2 Before opening the package: The LEDs should be kept at 30℃ or less and 90%RH or less. 2.3 After opening the package: The LED's floor life is 1 year under 30 deg C or less and 60% RH or less. If unused LEDs remain, it should be stored in moisture proof packages. 2.4 If the moisture absorbent material (silica gel) has faded away or the LEDs have exceeded the storage time, baking treatment should be performed using the following conditions. Baking treatment : 60±5℃ for 24 hours. 3. Soldering Condition 3.1 Pb-free solder temperature profile 1~5 °C / Sec. 260°C. Max. 10 Sec. Max. 1~5 °C / Sec. Pre-heating 180~200°C 60 Sec. Max. Above 220°C 120 Sec. Max. 3.2 Reflow soldering should not be done more than two times. 3.3 When soldering, do not put stress on the LEDs during heating. 3.4 After soldering, do not warp the circuit board. 4.Soldering Iron Each terminal is to go to the tip of soldering iron temperature less than 350℃ for 3 seconds within once in less than the soldering iron capacity 25W. Leave two seconds and more intervals, and do soldering of each terminal. Be careful because the damage of the product is often started at the time of the hand solder. 5.Repairing Repair should not be done after the LEDs have been soldered. When repairing is unavoidable, a double-head soldering iron should be used (as below figure). It should be confirmed beforehand whether the characteristics of the LEDs will or will not be damaged by repairing. 9 Copyright © 2010, Everlight Americas All Rights Reserved. Release Date : Apr.30.2014. Issue No: XXXXXXX www.everlightamericas.com