EAPLRBA1

Photolink- Fiber Optic Receiver EAPLRBA1 Features •High speed signal transmission(25Mbps NRZ Signal) • High PD sensitivity optimized for red light • Data : NRZ signal • Low power consumption for extended battery life • Built-in threshold control for improved noise Margin • The product itself will remain within RoHS compliant version • Receiver sensitivity: up to –27dBm (Min. for 25Mbps) Description The optical receiver is packaged with custom optic data link interface, integrated on a proprietary CMOS PDIC process. The unit functions by converting optical signals into electric ones. The unit is operated at 3.0 ~ 5.5 V and the signal output interface is TTL compatible with high performance at low power consumption. Applications • Digital Optical Data-Link • Dolby AC-3 Digital Audio Interface • HDMI Digital (192kHz) Audio Interface 1 Copyright © 2010, Everlight Americas Inc. All Rights Reserved. Release Date : 11.13.2012. Issue No: 1 www.everlightamericas.com DATASHEET Photolink- Fiber Optic Receiver EAPLRBA1 Absolute Maximum Ratings (Ta=25℃) Parameter Symbol Rating Unit Supply Voltage Output Voltage Storage Temperature Operating Temperature Soldering Temperature Human Body Model ESD Machine Model ESD Vcc Vout Tstg Topr Tsol HBM MM -0.5 ~ +5.5 Vcc +0.3 -40 to 85 -20 to 70 260* 2000 100 V V ºC ºC ºC V V Recommended Operating Conditions Parameter Symbol Conditions MIN. TYP. MAX. Unit Supply Voltage Vcc - 3.0 3.3 5.50 V Electro-Optical Characteristics (Ta=25℃) 2 Parameter Symbol Min. Typ. Max. Unit Condition Peak sensitivity wavelength Maximum receiver power Minimum receiver power Dissipation current High level output voltage Low level output voltage Rise time Fall time Propagation delay Low to High Propagation delay High to Low Pulse Width Distortion p Pc,max Pc,min Icc VOH VOL tr tf tPLH tPHL tw -27 3.0 -15 650 3 3.2 0.2 10 10 - -14 6 0.4 14 14 80 80 +15 nm dBm dBm mA V V ns ns ns ns ns Jitter tj - 1 5 ns Jitter Transfer rate tj T - 5 10 ns 0.1 - 25 Mb/s Refer to Fig.1 Refer to Fig.1 Refer to Fig.2 Refer to Fig.3 Refer to Fig.3 Refer to Fig.3 Refer to Fig.3 Refer to Fig.3 Refer to Fig.3 Refer to Fig.3 Refer to Fig.3, Pc=-14dBm Refer to Fig.3, Pc=-27dBm NRZ signal Copyright © 2010, Everlight Americas Inc. All Rights Reserved. Release Date : 11.13.2012. Issue No: 1 www.everlightamericas .com DATASHEET Photolink- Fiber Optic Receiver EAPLRBA1 Measuring Method *Fig.1 Measuring Method of Maximum and Minimum Input Power that Receiver Unit Need Control Circuit Standard plastic optic fiber cable Transmitter EAPLRBA1 Receiver PLR135 Receiver Unit Unit Optical Power Meter *Fig.2 Measuring Method of Dissipation Current Standard plastic optic fiber cable EAPLRBA1 Receiver Standard Transmitter unit Vin Vcc GND PLR233 Receiver Unit Unit Vcc GND 0.1uF Vout 47uH Signal Input A 3.3V 25Mbps NRZ "0101" successive signal input 3 Copyright © 2010, Everlight Americas Inc. All Rights Reserved. Release Date : 11.13.2012. Issue No: 1 www.everlightamericas .com DATASHEET Photolink- Fiber Optic Receiver EAPLRBA1 *Fig.3 Measuring Method of Output Voltage, Pulse and Jitter Standard plastic optic fiber cable EAPLRBA1 Receiver Standard Transmitter Unit Vin Vcc PLR135 Receiver Unit Unit GND GND Vcc 0.1uF 47uH Signal Input Vout A 3V 16 Mbps NRZ "0101" successive signal input TPHL TPLH Input CH1 50% CH2 Output 50% tj1 tj2 tw = TPHL-TPLH Application Circuit (1) General application circuit C1 Vcc GND L2 Vout C1:0.1uF Vcc L2:47uH Note: 1.For having good coupling, the C1 capacitor must be placed within 7mm 2. For having good signal waveform, the Vout –GND circuit capacitor shall be smaller than 30pF. 4 Copyright © 2010, Everlight Americas Inc. All Rights Reserved. Release Date : 11.13.2012. Issue No: 1 www.everlightamericas .com DATASHEET Photolink- Fiber Optic Receiver EAPLRBA1 Typical Electro-Optical Characteristics Curves *Fig.4 Power supply voltage vs. Minimum receiver *Fig.5 power -32 Operating Transfer Rate 16Mbps 25Mbps -30 Operating Voltage Vcc=3.3V Optical Input Sensitivity (dBm) Optical Input Sensitivity (dBm) -32 -28 -26 -24 -22 2.0 Transfer rate vs. Minimum receiver power 2.5 3.0 3.5 4.0 4.5 5.0 5.5 6.0 -30 -28 -26 -24 -22 0 5 Operating Voltage (V) Note: Before using the rate. 5 10 15 20 25 Transfer Rate (Mbps) EAPLRBA1 device, please confirm the minimum sensitivity at different operating voltage and transmission Copyright © 2010, Everlight Americas Inc. All Rights Reserved. Release Date : 11.13.2012. Issue No: 1 www.everlightamericas .com DATASHEET Photolink- Fiber Optic Receiver EAPLRBA1 Package Dimension Note: Tolerances unless mentioned ±0.3mm. Unit = mm PCB Layout for Electrical Circuit Note: General Tolerance :±0.2mm, Substrate Thickness:1.6mm, Unit = mm 6 Copyright © 2010, Everlight Americas Inc. All Rights Reserved. Release Date : 11.13.2012. Issue No: 1 www.everlightamericas .com DATASHEET Photolink- Fiber Optic Receiver EAPLRBA1 Moisture Resistant Packing Materials Label Explanation ‧CPN: Customer’s Product Number ‧P/N: Product Number ‧QTY: Packing Quantity ‧CAT: Luminous Intensity Rank ‧HUE: Dom. Wavelength Rank ‧REF: Forward Voltage Rank ‧LOT No: Lot Number ‧X: Month ‧Reference: Identify Label Number Packing Quantity Specification 1. 60 pcs/tube 2. 36 tube/box 3. 4 boxes/carton 7 Copyright © 2010, Everlight Americas Inc. All Rights Reserved. Release Date : 11.13.2012. Issue No: 1 www.everlightamericas .com DATASHEET Photolink- Fiber Optic Receiver EAPLRBA1 Notes 1. 2. 3. Above specification may be changed without notice. EVERLIGHT Americas will reserve authority on material change for above specification. .When using this product, please observe the absolute maximum ratings and the instructions for using outlined in these specification sheets. EVERLIGHT Americas assumes no responsibility for any damage resulting from use of the product which does not comply with the absolute maximum ratings and the instructions included in these specification sheets. These specification sheets include materials protected under copyright of EVERLIGHT Americas corporation. Please don’t reproduce or cause anyone to reproduce them without EVERLIGHT Americas’s consent. Application Notes: EAPLRBA1 PCB layout for motherboard integration To achieve better jitter and low input optical power performances, several PCB layout guidelines must be followed. These guidelines ensure the most reliable EAPLRBA1 POF performance for the motherboard integration. Failed to implement these PCB guidelines may affect the EAPLRBA1 jitter and low input power performances. 8 1. Careful decoupling of the power supplies is very important. Place a 0.1uf surface mount (size 805 or smaller) capacitor as close as (less than 2cm) to the POF Vdd and Gnd leads. The 0.1uf act as a low impedance path to ground for any stray high frequency transient noises. 2. To reduce the digital noises form the digital IC on the motherboard, the planar capacitance formed by an isolated Vcc and Gnd planes is critical. The POF device must be mounted directly on these two planes to reduce the lead parasitic inductance. 3. The isolated Vdd and Gnd planes must be connected to the main Vcc and Gnd (digital) planes at a single point using ferrite beads. The beads are used to block the high frequency noises from the digital planes while still allowing the DC connections between the planes Copyright © 2010, Everlight Americas Inc. All Rights Reserved. Release Date : 11.13.2012. Issue No: 1 www.everlightamericas .com