EL3H4(A)-G

4 PIN SSOP PHOTOTRANSISTOR PHOTOCOUPLER AC INPUT PHOTOCOUPLER EL3H4-G Series Schematic Features • Compliance Halogen Free (Br < 900 ppm, Cl < 900 ppm, Br+Cl < 1500 ppm) • AC input response • Current transfer ratio (CTR: Min. 20% at IF = ±1mA,VCE = 5V) • High isolation voltage between input and output (Viso = 3750 V rms ) • Compact small outline package • Compliance with EU REACH • The product itself will remain within RoHS compliant version • UL and cUL approved(No. E214129) • VDE approved (No. 132249) • SEMKO approved • NEMKO approved • DEMKO approved • FIMKO approved • CQC approved Pin Configuration 1. Anode / Cathode 2. Cathode / Anode 3. Emitter 4. Collector Description The EL3H4-G series contains two infrared emitting diode, connected in inverse parallel, optically coupled to a phototransistor encapsulated with green compound. It is packaged in a 4-pin small outline SMD package Applications • AC line monitor • Programmable controllers • Telephone line interface • Unknown polarity DC sensor 1 Copyright © 2010, Everlight All Rights Reserved. Release Date: Aug 31, 2016. Issue No: DPC-0000006 Rev.8 www.everlight.com DATASHEET 4 PIN SSOP PHOTOTRANSISTOR PHOTOCOUPLER AC INPUT PHOTOCOUPLER EL3H4-G Series Absolute Maximum Ratings (Ta=25°C) Parameter Input Symbol Rating Unit Forward current IF ±50 mA Peak forward current (t = 10µs) IFM 1 A PD 70 mW 150 mW 3.7 mW/°C Power Dissipation No derating required up to Ta = 100°C Power dissipation Derating factor (above Ta = 80°C) PC Output Collector-Emitter voltage VCEO 80 V Emitter-Collector voltage VECO 6 V PTOT 200 mW Isolation Voltage* VISO 3750 V rms Operating Temperature TOPR -55 to 100 °C Storage Temperature TSTG -55 to 125 °C TSOL 260 °C Total Power Dissipation 1 2 Soldering Temperature* Notes *1 AC for 1 minute, R.H.= 40 ~ 60% R.H. In this test, pins 1, 2 are shorted together, and pins 3, 4 are shorted together. *2 For 10 seconds. 2 Copyright © 2010, Everlight All Rights Reserved. Release Date: Aug 31, 2016. Issue No: DPC-0000006 Rev.8 www.everlight.com DATASHEET 4 PIN SSOP PHOTOTRANSISTOR PHOTOCOUPLER AC INPUT PHOTOCOUPLER EL3H4-G Series Electro-Optical Characteristics (Ta=25°C unless specified otherwise) Input Parameter Symbol Min. Typ. Max. Unit Condition Forward Voltage VF - 1.2 1.4 V IF =± 20mA Input capacitance Cin - 50 250 pF V = 0, f = 1kHz Min Typ. Max. Unit Condition ICEO - - 100 nA VCE = 20V, IF = 0mA BVCEO 80 - - V IC = 0.1mA BVECO 6 - - V IE = 0.01mA Min Typ. Max. Unit Condition 20 - 300 50 - 150 % IF = ±1mA ,VCE = 5V 100 - 300 Output Parameter Symbol Collector-Emitter dark current Collector-Emitter breakdown voltage Emitter-Collector breakdown voltage Transfer Characteristics Parameter Current Transfer ratio Symbol EL3H4 CTR EL3H4A EL3H4B CTR Symmetry Collector-Emitter saturation voltage 0.5 VCE(sat) 2.0 5×10 0.1 10 11 10 IF = ±1mA ,VCE = 5V 0.2 V IF =± 20mA ,IC = 1mA -  VIO = 500Vdc, 40~60% R.H. Isolation resistance RIO Floating capacitance CIO - 0.6 1.0 pF VIO = 0, f = 1MHz Rise time tr - - 18 µs Fall time tf - - 18 µs VCE = 2V, IC = 2mA, RL = 100 * Typical values at Ta = 25°C 3 Copyright © 2010, Everlight All Rights Reserved. Release Date: Aug 31, 2016. Issue No: DPC-0000006 Rev.8 www.everlight.com DATASHEET 4 PIN SSOP PHOTOTRANSISTOR PHOTOCOUPLER AC INPUT PHOTOCOUPLER EL3H4-G Series Typical Electro-Optical Characteristics Curves 4 Copyright © 2010, Everlight All Rights Reserved. Release Date: Aug 31, 2016. Issue No: DPC-0000006 Rev.8 www.everlight.com DATASHEET 4 PIN SSOP PHOTOTRANSISTOR PHOTOCOUPLER AC INPUT PHOTOCOUPLER EL3H4-G Series Figure 11. Switching Time Test Circuit & Waveforms 5 Copyright © 2010, Everlight All Rights Reserved. Release Date: Aug 31, 2016. Issue No: DPC-0000006 Rev.8 www.everlight.com DATASHEET 4 PIN SSOP PHOTOTRANSISTOR PHOTOCOUPLER AC INPUT PHOTOCOUPLER EL3H4-G Series Order Information Part Number EL3H4(Y)(Z)-VG Notes Y Z V G = CTR Rank (A, B or none) = Tape and reel option (TA, TB, EA, EB or none). = VDE (optional) = Halogens free Option 6 Description Packing quantity None Standard SMD option 150 units per tube -V Standard SMD option + VDE 150 units per tube (TA) TA Tape & reel option 5000 units per reel (TB) TB Tape & reel option 5000 units per reel (TA)-V TA Tape & reel option + VDE 5000 units per reel (TB)-V TB Tape & reel option + VDE 5000 units per reel (EA) TA Tape & reel option 1000 units per reel (EB) TB Tape & reel option 1000 units per reel (EA)-V TA Tape & reel option + VDE 1000 units per reel (EB)-V TB Tape & reel option + VDE 1000 units per reel Copyright © 2010, Everlight All Rights Reserved. Release Date: Aug 31, 2016. Issue No: DPC-0000006 Rev.8 www.everlight.com DATASHEET 4 PIN SSOP PHOTOTRANSISTOR PHOTOCOUPLER AC INPUT PHOTOCOUPLER EL3H4-G Series Package Dimension (Dimensions in mm) Recommended pad layout for surface mount leadform Notes Suggested pad dimension is just for reference only. Please modify the pad dimension based on individual need. 7 Copyright © 2010, Everlight All Rights Reserved. Release Date: Aug 31, 2016. Issue No: DPC-0000006 Rev.8 www.everlight.com DATASHEET 4 PIN SSOP PHOTOTRANSISTOR PHOTOCOUPLER AC INPUT PHOTOCOUPLER EL3H4-G Series Device Marking RYWWV EL 3H4 Notes EL 3H4 R Y WW V 8 denotes EVERLIGHT denotes Device Number denotes CTR Rank (A, B or none) denotes 1 digit Year code denotes 2 digit Week code denotes VDE (optional) Copyright © 2010, Everlight All Rights Reserved. Release Date: Aug 31, 2016. Issue No: DPC-0000006 Rev.8 www.everlight.com DATASHEET 4 PIN SSOP PHOTOTRANSISTOR PHOTOCOUPLER AC INPUT PHOTOCOUPLER EL3H4-G Series Tape & Reel Packing Specifications Option TB Option TA Direction of feed from reel Direction of feed from reel Tape dimensions Dimension No. Dimension (mm) Dimension No. Dimension (mm) 9 A0 B0 D0 D1 3.00 ± 0.10 7.45 ± 0.10 1.50 + 0.1/-0 1.50 ± 0.10 Po P1 4.00 ± 0.15 4.00 ± 0.10 E F 1.75± 0.10 5.50 ± 0.10 P2 t W K0 2.00 ± 0.10 0.30 ± 0.05 12.1 ± 0.2 2.45 ± 0.1 Copyright © 2010, Everlight All Rights Reserved. Release Date: Aug 31, 2016. Issue No: DPC-0000006 Rev.8 www.everlight.com DATASHEET 4 PIN SSOP PHOTOTRANSISTOR PHOTOCOUPLER AC INPUT PHOTOCOUPLER EL3H4-G Series Precautions for Use 1. Soldering Condition 1.1 (A) Maximum Body Case Temperature Profile for evaluation of Reflow Profile Notes Reference: IPC/JEDEC J-STD-020D Preheat Temperature min (Tsmin) 150 °C Temperature max (Tsmax) 200°C Time (Tsmin to Tsmax) (ts) 60-120 seconds Average ramp-up rate (Tsmax to Tp) 3 °C/second max Other Liquidus Temperature (TL) 217 °C Time above Liquidus Temperature (t L) 60-100 sec Peak Temperature (TP) 260°C Time within 5 °C of Actual Peak Temperature: T P - 5°C 30 s Ramp- Down Rate from Peak Temperature 6°C /second max. Time 25°C to peak temperature 8 minutes max. Reflow times 3 times . 10 Copyright © 2010, Everlight All Rights Reserved. Release Date: Aug 31, 2016. Issue No: DPC-0000006 Rev.8 www.everlight.com DATASHEET 4 PIN SSOP PHOTOTRANSISTOR PHOTOCOUPLER AC INPUT PHOTOCOUPLER EL3H4-G Series DISCLAIMER 1. Above specification may be changed without notice. EVERLIGHT will reserve authority on material change for above specification. 2. When using this product, please observe the absolute maximum ratings and the instructions for using outlined in these specification sheets. EVERLIGHT assumes no responsibility for any damage resulting from use of the product which does not comply with the absolute maximum ratings and the instructions included in these specification sheets. 3. These specification sheets include materials protected under copyright of EVERLIGHT corporation. Please don’t reproduce or cause anyone to reproduce them without EVERLIGHT’s consent. 4. These specification sheets include materials protected under copyright of EVERLIGHT. Reproduction in any form is prohibited without the specific consent of EVERLIGHT. 5. This product is not intended to be used for military, aircraft, automotive, medical, life sustaining or life saving applications or any other application which can result in human injury or death. Please contact authorized Everlight sales agent for special application request. 6. Statements regarding the suitability of products for certain types of applications are based on Everlight’s knowledge of typical requirements that are often placed on Everlight products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Everlight’s terms and conditions of purchase, including but not limited to the warranty expressed therein. 11 Copyright © 2010, Everlight All Rights Reserved. Release Date: Aug 31, 2016. Issue No: DPC-0000006 Rev.8 www.everlight.com