ELSS-512SYGWA

Technical Data Sheet 0.56" Single Digit SMD Displays ELSS-512SYGWA/S530-E2 Features ˙Packaged in tape and reel for SMT manufacturing. ˙Design flexibility(common cathode or anode). ˙Categorized for luminous intensity. ˙The thickness is thinness than tradition display. ˙Pb free. ˙The product ifself will remain within RoHS compliant version. Descriptions ˙The SMD type is much smaller than tradition type components, thus enable smaller board size, higher packing density, reduced storage space and finally smaller equipment to be obtained. Applications ˙Suitable for indoor use. ˙Audio system. ˙Set top box. ˙Game machine. ˙Channel indicator of TV. Device Selection Guide Chip Material AlGaInP Emitted Color Brilliant Yellow Green Gray Face Color Everlight Electronics Co., Ltd. Device No.: CDGS-512-005 http://www.everlight.com Prepared date:2006/5/9 Rev.2 Prepared by: Page: 1 of 8 Hong Zhou ELSS-512SYGWA/S530-E2 Package Dimensions Land Pattern(Recommend) Notes: ˙All dimensions are in millimeters, tolerance is 0.25mm unless otherwise noted. ˙Above specification may be changed without notice. Supplier will reserve authority on material change for above specification. Absolute Maximum Ratings (Ta=25℃) Parameter Forward Current Pulse Forward Current*1 Operating Temperature Storage Temperature Reflow Temperature Electrostatic Discharge Power Dissipation Reverse Voltage Symbol IF IFP Topr Tstg Tref ESD Pd VR Rating 25 60 -40 ~ +85 -40 ~ +90 260 2000 60 5 Units mA mA ℃ ℃ ℃ V mW V Notes: *1:IFP Conditions--Pulse Width≦10msec and Duty≦1/10. *2:Reflow time≦5 seconds. Everlight Electronics Co., Ltd. Device No.: CDGS-512-005 http://www.everlight.com Prepared date:2006/5/9 Rev.2 Prepared by: Page: 2 of 8 Hong Zhou ELSS-512SYGWA/S530-E2 Electro-Optical Characteristics (Ta=25℃) Parameter Forward Voltage Reverse Current Per segment Symbol VF IR Min. --- Typ. 2.0 -- Max. 2.4 10 Units V μA Condition IF=20mA VR=5V Luminous Intensity Per decimal point IV 4.0 10.8 -mcd IF=10mA 1.4 3.9 -- Peak Wavelenght Dominant Wavelenght Spectrum Radiation Bandwidth λp λd △λ ---- 575 573 20 ---- nm nm nm IF=20mA IF=20mA IF=20mA Chromaticity Coordinates Specifications for Bin Grading (Unit: mcd) Rank N P Q Min. 4.0 5.6 7.8 Max. 6.4 8.9 12.5 Rank R S T Min. 11.0 15.0 21.0 Max. 17.6 24.0 34.0 Everlight Electronics Co., Ltd. Device No.: CDGS-512-005 http://www.everlight.com Prepared date:2006/5/9 Rev.2 Prepared by: Page: 3 of 8 Hong Zhou ELSS-512SYGWA/S530-E2 Typical Electro-Optical Characteristics Curves Everlight Electronics Co., Ltd. Device No.: CDGS-512-005 http://www.everlight.com Prepared date:2006/5/9 Rev.2 Prepared by: Page: 4 of 8 Hong Zhou ELSS-512SYGWA/S530-E2 ■ Reflow Temp. / Time : ■ Soldering Iron : Basic spec is ≦5 sec when 260℃.If temperature is higher, time should be shorter (+10℃ → -1sec). Power dissipation of iron should be smaller than 15 W , and temperature should be controllable. Surface temperature of the device should be under 230 ℃. ■ Rework : 1. Customer must finish rework within 5 sec under 260℃. 2. The head of iron can not touch copper foil. Everlight Electronics Co., Ltd. Device No.: CDGS-512-005 http://www.everlight.com Prepared date:2006/5/9 Rev.2 Prepared by: Page: 5 of 8 Hong Zhou ELSS-512SYGWA/S530-E2 ■ Reliability test items and conditions: The reliability of products shall be satisfied with items listed below. Confidence level：90% LTPD：10% NO Item Test Conditions TEMP:260°C±5°C Min. 5 SEC H：+100°C 15min ∫ 5min L：-40°C 15min H：+100°C 5min ∫ 10 sec L：-10°C 5min TEMP:100°C Test Hours/Cycle 6 Min Sample Size 22 PCS Failure Judgment Criteria Ac/Re 1 Reflow Soldering Temperature Cycle Thermal Shock High Temperature Storage Low Temperature Storage DC Operating Life 0/1 2 300 Cycles 22 PCS 0/1 3 300 Cycles 22 PCS Iv≦Ivt*0.5 or 22 PCS VF≧U or VF≦L 22 PCS 0/1 4 1000 HRS 0/1 5 TEMP:-40°C 1000 HRS 0/1 6 TEMP:25°C If＝10mA 1000 HRS 22 PCS 0/1 High 85°C / 85% RH 7 Temperature / 1000 HRS 22 PCS High Humidity Note：Ivt：The test Iv value of the chip before the reliability test Iv：The test value of the chip that has completed the reliability test U：Upper Specification Limit L： Lower Specification Limit 0/1 Everlight Electronics Co., Ltd. Device No.: CDGS-512-005 http://www.everlight.com Prepared date:2006/5/9 Rev.2 Prepared by: Page: 6 of 8 Hong Zhou ELSS-512SYGWA/S530-E2 Package Dimensions 2.30 32.50 A" B" 11 12 1 234 03 03 330 03 03 03 567 03 12 0° 2 R20 1 2 3 10.75 Taping Dimensions P2 P0 P E F D0 12 R0 .8 5 D1 K0 1.50 -0 +0.10 A1 A0 Everlight Electronics Co., Ltd. Device No.: CDGS-512-005 http://www.everlight.com Prepared date:2006/5/9 Rev.2 Prepared by: B0 Page: 7 of 8 Hong Zhou W 8 9 10 110 90 100 6 PS 4 5 6 7 8 2.3 . R6 75 R1 T 40° ELSS-512SYGWA/S530-E2 Packing Quantity Specification 800PCS/Roll，1Roll/Small box, 6Small boxes/Box Label Form Specification CPN: Customer’s Production Number P/N : Production Number QTY: Packing Quantity CAT: Ranks HUE: Peak Wavelength REF: Reference LOT No: Lot Number DC: Year and weekly CPN : P/ N : S S 5 1 2 S Y G W A /S 5 3 0 -E 2 QTY : LOT NO : CAT : DC: Notes 1. Above specification may be changed without notice. EVERLIGHT will reserve authority on material change for above specification. 2. When using this product, please observe the absolute maximum ratings and the instructions for using outlined in these specification sheets. EVERLIGHT assumes no responsibility for any damage resulting from use of the product which does not comply with the absolute maximum ratings and the instructions included in these specification sheets. 3. These specification sheets include materials protected under copyright of EVERLIGHT corporation. Please don’t reproduce or cause anyone to reproduce them without EVERLIGHT’sconsent. EVERLIGHT ELECTRONICS CO., LTD. Office: No 25, Lane 76, Sec 3, Chung Yang Rd, Tucheng, Taipei 236, Taiwan, R.O.C Tel: 886-2-2267-2000, 2267-9936 Fax: 886-2267-6244, 2267-6189, 2267-6306 http://www.everlight.com Everlight Electronics Co., Ltd. Device No.: CDGS-512-005 http://www.everlight.com Prepared date:2006/5/9 Rev.2 Prepared by: Page: 8 of 8 Hong Zhou