G1DB-ALNA

Technical Data Sheet 3474/G1DB-ALNA/X/MS Features ․High luminous intensity output ․Oval Shape ․Well defined spatial radiation ․Wide viewing angle (2θ1/2) : 100o / 50o ․ESD-withstand voltage: up to 4KV ․The product itself will remain within RoHS compliant version ․UV resistant epoxy Descriptions ․This precision optical performance oval LED is specifically designed for passenger information signs ․This lamp has matched radiation patterns with red and blue mixing color applications ․Superior performance in outdoor environment Applications ․Single or Dual Color Graphic Signs ․Message boards ․Variable message signs (VMS) ․Commercial outdoor advertising Device Selection Guide LED Part No. 3474/G1DB-ALNA/MS 3474/G1DB-ALNA/P/MS Chip Material InGaN Emitted Color Super Green Lens Color Green Diffused Stopper No Yes Everlight Electronics Co., Ltd. Device Number : DLE-347-003 http\\:www.everlight.com Prepared date: 11-01-2005 Rev 1 Page: 1 of 7 Prepared by: Grace Shen Technical Data Sheet 3474/G1DB-ALNA/X/MS Package Dimensions Stopper Type No Stopper Type Notes: ․All dimensions are in millimeters, tolerance is 0.25mm except being specified. ․Protruded resin under flange is 1.5mm Max LED. ․Bare copper alloy is exposed at tie-bar portion after cutting. Everlight Electronics Co., Ltd. Device Number : DLE-347-003 http\\:www.everlight.com Prepared date: 11-01-2005 Rev 1 Page: 2 of 7 Prepared by: Grace Shen Technical Data Sheet 3474/G1DB-ALNA/X/MS Absolute Maximum Rating (Ta=25℃) Parameter Forward Current Pulse Forward Current (Duty1/10@ 1KHz) Operating Temperature Storage Temperature Electrostatic Discharge Soldering Temperature Power Dissipation Reverse Voltage Symbol IF IFP Topr Tstg ESD Tsol Pd VR Absolute Maximum Rating 30 100 -40 ~ +85 -40 ~ +100 4K 260 ±5 100 5 100 Unit mA mA ℃ ℃ V ℃ mW V mA Zener Reverse Current Iz Notes: Soldering time≦5 seconds. Electro-Optical Characteristics (Ta=25℃) Parameter Luminous Intensity Viewing Angle Peak Wavelength Dominant Wavelength Spectrum Half width Forward Voltage Reverse Current Zener Reverse Voltage Rank Luminous Intensity Rank Forward Voltage Symbol IV 2θ1/2 λp λd Δλ VF IR Vz L 1425~1800 0 2.8~3.0 Min. 1425 ------5.2 Typ. 2000 X:100 Y:50 518 525 35 3.4 --M 1800~2250 1 3.0~3.2 2 3.2~3.4 Max. 2850 ----3.6 50 -N 2250~2850 Unit:mcd Unit mcd deg nm V μA V Condition IF=20mA VR=5V Iz=5mA Rank Combination (IF=20mA) *Measurement Uncertainty of Luminous Intensity: ±15% 3 3.4~3.6 Unit:V *Measurement Uncertainty of Forward Voltage: ±0.1V Rank Dominant Wavelength 1 524~528 2 528~532 Unit:nm *Measurement Uncertainty of Dominant Wavelength ±1.0nm *The quantity ratio of the ranks is decided by EVERLIGHT. Everlight Electronics Co., Ltd. Device Number : DLE-347-003 http\\:www.everlight.com Prepared date: 11-01-2005 Rev 1 Page: 3 of 7 Prepared by: Grace Shen Technical Data Sheet 3474/G1DB-ALNA/X/MS Typical Electro-Optical Characteristics Curves Everlight Electronics Co., Ltd. Device Number : DLE-347-003 http\\:www.everlight.com Prepared date: 11-01-2005 Rev 1 Page: 4 of 7 Prepared by: Grace Shen Technical Data Sheet 3474/G1DB-ALNA/X/MS Packing Quantity Specification 1.1000PCS/1Bag，5Bags/1Box 2.10Boxes/1Carton Label Form Specification EVERLIGHT CPN: P/N: RoHS 3474/G1DB-ALNA/X/MS QTY： CAT: HUE: LOT NO： REF: MADE IN TAIWAN CPN: Customer’s Production Number P/N : Production Number QTY: Packing Quantity CAT: Ranks of Luminous Intensity and Forward Voltage HUE: Ranks of Dominant Wavelength REF: Reference LOT No: Lot Number MADE IN TAIWAN: Production Place Everlight Electronics Co., Ltd. Device Number : DLE-347-003 http\\:www.everlight.com Prepared date: 11-01-2005 Rev 1 Page: 5 of 7 Prepared by: Grace Shen Technical Data Sheet 3474/G1DB-ALNA/X/MS Notes 1. Above specification may be changed without notice. EVERLIGHT will reserve authority on material change for above specification. 2. When using this product, please observe the absolute maximum ratings and the instructions for using outlined in these specification sheets. EVERLIGHT assumes no responsibility for any damage resulting from use of the product which does not comply with the absolute maximum ratings and the instructions included in these specification sheets. 3. These specification sheets include materials protected under copyright of EVERLIGHT corporation. Please don’t reproduce or cause anyone to reproduce them without EVERLIGHT’s consent. 4. Below the zener reference voltage Vz, all the current flows through LED and as the voltage rises to Vz, the zener diode “breakdown." If the voltage tries to rise above Vz current flows through the zener branch to keep the voltage at exactly Vz. 5. When the LED is connected using serial circuit, if either piece of LED is no light up but current can’t flow through causing others to light down. In new design, the LED is parallel with zener diode. if either piece of LED is no light up but current can flow through causing others to light up. 6. Soldering Condition Careful attention should be paid during soldering. When soldering, leave more then 3mm from Everlight Electronics Co., Ltd. Device Number : DLE-347-003 http\\:www.everlight.com Prepared date: 11-01-2005 Rev 1 Page: 6 of 7 Prepared by: Grace Shen Technical Data Sheet 3474/G1DB-ALNA/X/MS solder joint to case, and soldering beyond the base of the tie bar is recommended. Avoiding applying any stress to the lead frame while the LEDs are at high temperature particularly when soldering. Recommended soldering conditions: Hand Soldering Temp. at tip of iron Soldering time Distance 400℃ Max. (30W Max.) 3 sec Max. 3mm Min.(From solder joint to case) Preheat temp. Bath temp. Bath time. Distance DIP Soldering 100℃ Max. (60 sec Max.) 265 Max. 5 sec Max. 3mm Min. EVERLIGHT ELECTRONICS CO., LTD. Office: No 25, Lane 76, Sec 3, Chung Yang Rd, Tucheng, Taipei 236, Taiwan, R.O.C Tel: 886-2-2267-2000, 2267-9936 Fax: 886-2267-6244, 2267-6189, 2267-6306 http:\\www.everlight.com Everlight Electronics Co., Ltd. Device Number : DLE-347-003 http\\:www.everlight.com Prepared date: 11-01-2005 Rev 1 Page: 7 of 7 Prepared by: Grace Shen