HIR36-01C

Technical Data Sheet High Power Infrared LED HIR36-01C/S32 Features ․High reliability ․High radiant intensity ․Peak wavelength λp=850nm ․Low forward voltage ․Pb free ․The product itself will remain within RoHS compliant version. Descriptions ․EVERLIGHT’S Infrared Emitting Diode(HIR36-01C/S32) is a high intensity diode , molded in a water clear plastic package. ․The device is spectrally matched with phototransistor , photodiode and infrared receiver module. Applications ․CCTV ․Infrared applied system Device Selection Guide LED Part No. HIR Chip Material AlGaAs Lens Color Water Clear Everlight Electronics Co., Ltd. Device No：DIH-036-099 http:\\www.everlight.com Prepared date：05-17-2007 Rev 1 Page: 1 of 7 Prepared by：Daniel Yang HIR36-01C/S32 Package Dimensions Notes: 1.All dimensions are in millimeters 2.Tolerances unless dimensions ±0.25mm Absolute Maximum Ratings (Ta=25℃) Parameter Continuous Forward Current Peak Forward Current *1 Reverse Voltage Operating Temperature Storage Temperature Soldering Temperature*2 Power Dissipation at(or below) 25℃Free Air Temperature Symbol IF IFP VR Topr Tstg Tsol Pd Rating 100 1.0 5 -40 ~ +85 -40 ~ +100 260 200 Units mA A V ℃ ℃ ℃ mW Notes: *1:IFP Conditions--Pulse Width≦100μs and Duty≦1%. *2:Soldering time≦5 seconds. Everlight Electronics Co., Ltd. Device No：DIH-036-099 http:\\www.everlight.com Prepared date：05-17-2007 Rev 1 Page: 2 of 7 Prepared by：Daniel Yang HIR36-01C/S32 Electro-Optical Characteristics (Ta=25℃) Parameter Radiant Intensity Peak Wavelength Spectral Bandwidth Forward Voltage Optical Rise Time Optical Fall Time Reverse Current View Angle Symbol Ie λp Δλ VF tr tf IR 2θ1/2 Condition IF=20mA IF=100mA Pulse Width≦100μs ,Duty≦1% Min. 15 ---------- Typ. 29 150 850 50 1.45 1.80 11 7 -20 Max. -- Units mW/sr ---1.65 2.40 --10 -nm nm V ns ns μA deg IF=20mA IF=20mA IF=20mA IF=100mA Pulse Width≦100μs ,Duty≦1% IF=20mA IF=20mA VR=5V IF=20mA Rank Condition: IF=20mA Unit: mW/sr Bin number Min Max P 15.0 24.0 Q 21.0 34.0 R 30.0 48.0 Everlight Electronics Co., Ltd. Device No：DIH-036-099 http:\\www.everlight.com Prepared date：05-17-2007 Rev 1 Page: 3 of 7 Prepared by：Daniel Yang HIR36-01C/S32 Typical Electro-Optical Characteristics Curves Fig.1 Forward Current vs. Ambient Temperature 140 120 100 80 60 40 20 0 Fig.2 Spectral Distribution 100 80 60 40 20 0 IF=20mA Ta=25° C -40 -20 0 20 40 60 80 100 790 810 830 850 870 890 910 930 950 Fig.3 Peak Emission Wavelength Ambient Temperature 900 Fig.4 Forward Current vs. Forward Voltage 4 10 875 3 10 850 825 2 10 800 -25 0 25 50 75 100 1 10 0 1 2 3 4 5 6 7 8 Everlight Electronics Co., Ltd. Device No：DIH-036-099 http:\\www.everlight.com Prepared date：05-17-2007 Rev 1 Page: 4 of 7 Prepared by：Daniel Yang HIR36-01C/S32 Typical Electro-Optical Characteristics Curve Fig.5 Relative Intensity vs. Forward Current Fig.6 Relative Radiant Intensity vs. Angular Displacement 1000 Ie-Radiant Intensity(mW/sr) -20 -10 0 10 20 30 100 1.0 10 40 50 60 70 80 0.6 0.4 0.2 0 0.2 0.4 0.6 0.9 0.8 0.7 0 10 0 10 1 10 2 10 3 10 4 IF-Forward Current (mA) Everlight Electronics Co., Ltd. Device No：DIH-036-099 http:\\www.everlight.com Prepared date：05-17-2007 Rev 1 Page: 5 of 7 Prepared by：Daniel Yang HIR36-01C/S32 Reliability Test Item And Condition The reliability of products shall be satisfied with items listed below. Confidence level：90% LTPD：10% NO. Item Test Conditions Test Hours/ Sample Cycles Sizes 10secs 22pcs 22pcs Failure Judgement Criteria IR≧U×2 Ie≦L×0.8 VF≧U×1.2 U：Upper Ac/Re 1 Solder Heat TEMP.：260℃±5℃ 0/1 0/1 2 Temperature Cycle H : +100℃ L : -40℃ 3 Thermal Shock H :+100℃ L :-10℃ 4 High Temperature Storage 5 Low Temperature Storage 15mins 50Cycles 5mins 15mins 5mins 10secs 5mins 1000hrs 1000hrs 1000hrs 1000hrs 50Cycles 22pcs 0/1 Specification Limit 0/1 L：Lower Specification 0/1 Limit 0/1 0/1 TEMP.：+100℃ TEMP.：-40℃ 22pcs 22pcs 22pcs 22pcs 6 DC Operating Life IF=20mA 7 High Temperature/ 85℃ / 85% R.H High Humidity Everlight Electronics Co., Ltd. Device No：DIH-036-099 http:\\www.everlight.com Prepared date：05-17-2007 Rev 1 Page: 6 of 7 Prepared by：Daniel Yang HIR36-01C/S32 Packing Quantity Specification 1.60PCS/1Tube，30Tubes/1Box or 105Tubles/1Box Label Form Specification(For tube) PART NO: LOT NO: QTY: CAT: Label Form Specification (For box) CPN: Customer’s Production Numb P/N : Production Number QTY: Packing Quantity CAT: Ranks HUE: Peak Wavelength REF: Reference LOT No: Lot Number MADE IN TAIWAN: Production Place RoHS HIR36-01C/S32 Notes 1. Above specification may be changed without notice. EVERLIGHT will reserve authority on material change for above specification. 2. When using this product, please observe the absolute maximum ratings and the instructions for using outlined in these specification sheets. EVERLIGHT assumes no responsibility for any damage resulting from use of the product which does not comply with the absolute maximum ratings and the instructions included in these specification sheets. 3. These specification sheets include materials protected under copyright of EVERLIGHT corporation. Please don’t reproduce or cause anyone to reproduce them without EVERLIGHT’s consent. EVERLIGHT ELECTRONICS CO., LTD. Office: No 25, Lane 76, Sec 3, Chung Yang Rd, Tucheng, Taipei 236, Taiwan, R.O.C Tel: 886-2-2267-2000, 2267-9936 Fax: 886-2267-6244, 2267-6189, 2267-6306 http:\\www.everlight.com Everlight Electronics Co., Ltd. Device No：DIH-036-099 http:\\www.everlight.com Prepared date：05-17-2007 Rev 1 Page: 7 of 7 Prepared by：Daniel Yang