IRM-2636A-TR1-11A

EVERLIGHT ELECTRONICS CO.,LTD. Technical Data Sheet Infrared Remote-control Receiver Module IRM-2636A/TR1-11(A) Features : • Photo detector and preamplifier in one package • Internal filter for PCM frequency • Improved shielding against electrical field disturbance • TTL and CMOS compatibility • Output active low • Low power consumption • Improved immunity against ambient light • Suitable burst length ≧10 pulses/burst. • Pb free •The product itself will remain within RoHS compliant version Descriptions ‧The IRM2636A/TR1-11 are miniaturized receivers for infrared remote control systems. PIN diode and preamplifier are assembled on lead frame, the epoxy package is designed as IR filter. The demodulated output signal can directly be decoded by a microprocessor. IRM2636A/TR1-11 is the standard IR remote control receiver series, supporting all major transmission codes. Applications 1. Optical switch 2. Light detecting portion of remote control ․AV instruments such as Audio, TV, VCR, CD, MD, etc. ․Home appliances such as Air-conditioner, Fan , etc. ․The other equipments with wireless remote control. ․CATV set top boxes ․Multi-media Equipment PART Chip Compound MATERIAL Silicon Epoxy COLOR Black Black Everlight Electronics Co., Ltd. Device No：SZDMO-026-010 http:\\www.everlight.com Prepared date：20-Aug-2005 Rev 2 Page: 1 of 12 Prepared by：Zhifang Pan EVERLIGHT ELECTRONICS CO.,LTD. IRM-2636A/TR1-11(A) Package Dimensions OUT GND Vcc Notes: 1.All dimensions are in millimeters. 2.Tolerances unless dimensions ±0.3mm. Absolute Maximum Ratings (Ta=25℃) Parameter Supply Voltage Operating Temperature Storage Temperature Soldering Temperature Symbol Vcc Topr Tstg Tsol Rating 0~6 -25 ~ +80 -40 ~ +85 260 Unit V ℃ ℃ ℃ 4mm from mold body less than 10 seconds Notice Everlight Electronics Co., Ltd. Device No：SZDMO-026-010 http:\\www.everlight.com Prepared date：20-Aug-2005 Rev 2 Page: 2 of 12 Prepared by：Zhifang Pan EVERLIGHT ELECTRONICS CO.,LTD. IRM-2636A/TR1-11(A) Recommended Operating Condition Supply Voltage Rating: Vcc 4.5V to 5.5V Electro-Optical Characteristics (Ta=25℃, and Vcc=5 V) Parameter Consumption Current B.P.F Center Frequency Peak Wavelength Reception Distance Half Angle(Horizontal) Half Angle(Vertical) High Level Pulse Width Low Level Pulse Width High Level Output Voltage Low Level Output Voltage Symbol Icc Fo λp L0 L45 Θh Θv TH TL VH VL MIN. ------12 6 ----400 400 4.5 --TYP. 1.1 36 940 ----45 45 ------0.2 MAX. 2.5 ------------800 800 --0.5 deg deg μs μs V V At the ray axis *2 At the ray axis *1 Unit mA KHz nm m Condition No signal input *1:The ray receiving surface at a vertex and relation to the ray axis in the range of θ= 0° and θ=45°. *2:A range from 30cm to the arrival distance. Average value of 50 pulses. Everlight Electronics Co., Ltd. Device No：SZDMO-026-010 http:\\www.everlight.com Prepared date：20-Aug-2005 Rev 2 Page: 3 of 12 Prepared by：Zhifang Pan EVERLIGHT ELECTRONICS CO.,LTD. IRM-2636A/TR1-11(A) Test Method： The specified electro-optical characteristics is satisfied under the following Conditions at the controllable distance. Measurement place A place that is nothing of extreme light reflected in the room. External light Project the light of ordinary white fluorescent lamps which are not high Frequency lamps and must be less then 10 Lux at the module surface. (Ee≦10Lux) Standard transmitter A transmitter whose output is so adjusted as to Vo=400mVp-p and the output Wave form shown in Fig.-1.According to the measurement method shown in Fig.-2 the standard transmitter is specified. However , the infrared photodiode to be used for the transmitter should be λp=940nm,∆λ=50nm. Also, photodiode is used of PD438B(Vr=5V). Measuring system According to the measuring system shown in Fig.-3 Fig.-1 Transmitter Wave Form D.U.T output Pulse Carrier frequency is adjusted to center frequency of each product. OUTPUT PULSE OF DEVICE IR TANSMITTER OUTPUT WAVE FORM Duty=0.5 Everlight Electronics Co., Ltd. Device No：SZDMO-026-010 http:\\www.everlight.com Prepared date：20-Aug-2005 Rev 2 Page: 4 of 12 Prepared by：Zhifang Pan EVERLIGHT ELECTRONICS CO.,LTD. IRM-2636A/TR1-11(A) Fig.-2 Measuring Method 20cm 10k +5.0± 0.1V 10uF θ Fig.-3 Measuring System L: Transmission Distance Vcc θ OUT D.U.T Standard Transmitter Vout 100k Standard Transmitter Vout GND θ: Angle Of Horizontal & Vertical Direction Oscilloscope Block Diagram： VCC Voltage Reference Circuit Noise Det.& Gain Ctrl. Band-pass Filter IN I-V Converter &Input Bias Control Pre Amp AGC Amp Limit Amp Comparator Integrator &Wave Shaping Output Stage OUT Fset Bias Circuit Frequency Setting Frequency Trimming Threshold Control Circuit GND Application Circuit： RC Filter should be connected closely between Vcc pin and GND pin. Everlight Electronics Co., Ltd. Device No：SZDMO-026-010 http:\\www.everlight.com Prepared date：20-Aug-2005 Rev 2 Page: 5 of 12 Prepared by：Zhifang Pan EVERLIGHT ELECTRONICS CO.,LTD. IRM-2636A/TR1-11(A) Typical Electro-Optical Characteristics Curves Fig.-4 Relative Spectral Sensitivity vs. Wavelength Fig.-5 Relative Transmission Distance vs. Direction θ Fig.-6 Output Pulse Length vs. Arrival Distance Fig.-7 Arrival Distance vs. Supply Voltage Everlight Electronics Co., Ltd. Device No：SZDMO-026-010 http:\\www.everlight.com Prepared date：20-Aug-2005 Rev 2 Page: 6 of 12 Prepared by：Zhifang Pan EVERLIGHT ELECTRONICS CO.,LTD. IRM-2636A/TR1-11(A) Typical Electro-Optical Characteristics Curves Fig.-8 Relative Transmission Distance vs. Center Carrier Frequency Fig.-9 Arrival Distance vs. Ambient Temperature Everlight Electronics Co., Ltd. Device No：SZDMO-026-010 http:\\www.everlight.com Prepared date：20-Aug-2005 Rev 2 Page: 7 of 12 Prepared by：Zhifang Pan EVERLIGHT ELECTRONICS CO.,LTD. IRM-2636A/TR1-11(A) █ Reliability Test Item And Condition The reliability of products shall be satisfied with items listed below. Confidence level：90% LTPD：10% Test Items Test Conditions 1 cycle Temperature cycle -40℃ +25℃ +85℃ (30min)(5min)(30min) 300 cycle test Failure Judgement Criteria Samples(n) Defective(c) n=22,c=0 Temp: +85℃ High temperature test Vcc:5V 1000hrs Low temperature storage High temperature High humidity Temp: -40℃ 1000hrs Ta: 85℃,RH: 85% 1000hrs Temp: 260±5℃ 10sec 4mm From the bottom of the package. n=22,c=0 L0≦ L×0.8 L45≦ L×0.8 n=22,c=0 L: Lower specification limit n=22,c=0 Solder heat n=22,c=0 Everlight Electronics Co., Ltd. Device No：SZDMO-026-010 http:\\www.everlight.com Prepared date：20-Aug-2005 Rev 2 Page: 8 of 12 Prepared by：Zhifang Pan EVERLIGHT ELECTRONICS CO.,LTD. IRM-2636A/TR1-11(A) █ Package Dimensions Everlight Electronics Co., Ltd. Device No：SZDMO-026-010 http:\\www.everlight.com Prepared date：20-Aug-2005 Rev 2 Page: 9 of 12 Prepared by：Zhifang Pan EVERLIGHT ELECTRONICS CO.,LTD. IRM-2636A/TR1-11(A) █ Taping size Description Component Body Height Component Body Width Component Body Thickness Component Lead Width Tape Feeding Hole Diameter Lead Pitch Feed Hole To Button Of Component Length From Seating plane Lead Clinch Height Body Inclination Feeding Hold Pitch Feeding Hold Alignment Tape Width Feeding Hold Alignment Adhesive Tape Width Adhesive Tape Margin Total Tape Thickness Symbol A B C d D F1 / F2 H H1 H2 △h/△P P1 P2 W1 W2 W3 W4 t Dimension 6.95 6 5.60 0.5 4.0 2.54 18 16.7 22.25 3 deg 12.7 6.35 18.0 9.0 13.1 0.5 0.65 Tolerance ±0.3 ±0.3 ±0.3 ±0.05 ±0.2 ±0.2 ±0.5 ±0.5 ±0.5 ±2.0 ±0.2 ±1.0 ±0.5 ±0.5 ±0.5 Min.0 ±0.2 Everlight Electronics Co., Ltd. Device No：SZDMO-026-010 http:\\www.everlight.com Prepared date：20-Aug-2005 Rev 2 Page: 10 of 12 Prepared by：Zhifang Pan EVERLIGHT ELECTRONICS CO.,LTD. IRM-2636A/TR1-11(A) Packing Specifications INNER BOX for AMMO-PACK H:250mm L:330mm W: 50mm Carton H:280mm L:520mm W:340mm Everlight Electronics Co., Ltd. Device No：SZDMO-026-010 http:\\www.everlight.com Prepared date：20-Aug-2005 Rev 2 Page: 11 of 12 Prepared by：Zhifang Pan EVERLIGHT ELECTRONICS CO.,LTD. IRM-2636A/TR1-11(A) Packing Quantity Specification 1. 2000PCS/1Box 2. 10Boxes/1Carton Label Form Specification CPN: Customer’s Production Number P/N : Production Number QTY: Packing Quantity CAT: Ranks HUE: Peak Wavelength REF: Reference LOT No: Lot Number MADE IN TAIWAN: Production Place IRM-2636A/TR1-11(A) Notes 1. Above specification may be changed without notice. EVERLIGHT will reserve authority on material change for above specification. 2. When using this product, please observe the absolute maximum ratings and the instructions for using outlined in these specification sheets. EVERLIGHT assumes no responsibility for any damage resulting from use of the product which does not comply with the absolute maximum ratings and the instructions included in these specification sheets. 3. These specification sheets include materials protected under copyright of EVERLIGHT corporation. Please don’t reproduce or cause anyone to reproduce them without EVERLIGHT’s consent. EVERLIGHT ELECTRONICS CO., LTD. Office: No 25, Lane 76, Sec 3, Chung Yang Rd, Tucheng, Taipei 236, Taiwan, R.O.C Tel: 886-2-2267-2000, 2267-9936 Fax: 886-2267-6244, 2267-6189, 2267-6306 http:\\www.everlight.com Everlight Electronics Co., Ltd. Device No：SZDMO-026-010 http:\\www.everlight.com Prepared date：20-Aug-2005 Rev 2 Page: 12 of 12 Prepared by：Zhifang Pan