IRM-2638S13F4

Technical Data Sheet Infrared Remote-control Receiver Module IRM-2638S13F4 █ Features : ‧High protection ability against EMI . ‧Circular lens to improve the receive characteristic. ‧Line-up for various center carrier frequencies. ‧Low voltage and low power consumption. ‧High immunity against ambient light. ‧Photodiode with integrated circuit. ‧TTL and CMOS compatibility. ‧Long reception distance and high sensitivity ‧Automatic sensitivity adaptation(AGC) and automatic strong signal adaptation(ATC). ‧Suitable min. burst length≧10 pulses/burst. █ Description : ‧The device is a miniature type infrared remote control system receiver which has been developed and designed by utilizing the most updated IC technology. The PIN diode and preamplifier are assembled on lead frame, the epoxy package is designed as an IR filter. The demodulated output signal can directly be decoded by a microprocessor. █ Applications : 1. Optical switch 2. Light detecting portion of remote control ‧AV instruments such as Audio, TV, VCR, CD, MD, etc. ‧Home appliances such as Air-conditioner, Fan , etc. ‧The other equipments with wireless remote control. ‧CATV set top boxes ‧ Multi-media Equipment PART Chip Shell MATERIAL Silicon Tinplate COLOR Black Silver-white Device NO: DMO-026-200 Everlight Electronics Co., Ltd. http://www.everlight.com Rev 1.0 Page: 1 of 7 █ Package Dimensions : IRM-2638S13F4 ■ NOTES： 1. All dimensions are in millimeters. 2. In case of designation is tolerance ±0.3mm. █Absolute Maximum Ratings at TA = 25℃ Parameter Supply Voltage Operating Temperature Storage Temperature Soldering Temperature Symbol Vcc Topr Tstg Tsol Rating 0~6 -25 ~ +80 -40 ~ +85 260 Unit V ℃ ℃ ℃ 4mm from mold body less than 5 seconds Device NO: DMO-026-200 Everlight Electronics Co., Ltd. http://www.everlight.com Rev 1.0 Page: 2 of 7 Notice IRM-2638S13F4 █Electro-Optical Characteristics (Ta=25℃, and Vcc=4.5V~5.5V) Parameter Supply Voltage Supply Current B.P.F Center Frequency Peak Wavelength Reception Distance Half Angle(Horizontal) Half Angle(Vertical) High Level Pulse Width Low Level Pulse Width High Level Output Voltage Low Level Output Voltage Symbol Vcc Icc Fo λp L0 L45 Θh Θv TH TL VH VL MIN. 4.5 0.8 ----8 5 ----400 400 4.5 --TYP. 5 1.1 38 940 ----45 45 ------0.2 MAX. 5.5 1.3 ------------800 800 --0.5 m deg deg μs μs V V At the ray axis *2 At the ray axis *1 Unit V mA KHz nm Condition DC voltage No signal input ■ Appendix of Page 3： *1:The ray receiving surface at a vertex and relation to the ray axis in the range of θ= 0° and θ=45°. *2:A range from 30cm to the arrival distance. Average value of 50 pulses. Device NO: DMO-026-200 Everlight Electronics Co., Ltd. http://www.everlight.com Rev 1.0 Page: 3 of 7 IRM-2638S13F4 ■ Test Method： The specified electro-optical characteristics is satisfied under the following Conditions at the controllable distance. Measurement place A place that is nothing of extreme light reflected in the room. External light Project the light of ordinary white fluorescent lamps which are not high Frequency lamps and must be less then 10 Lux at the module surface. (Ee≦10Lux) Standard transmitter A transmitter whose output is so adjusted as to Vo=400mVp-p and the output Wave form shown in Fig.-1.According to the measurement method shown in Fig.-2 the standard transmitter is specified. However , the infrared photodiode to be used for the transmitter should be λp=940nm,∆λ=50nm. Also, photodiode is used of PD438B(Vr=5V). (Standard light / Light source temperature 2856°K). Measuring system According to the measuring system shown in Fig.-3 ■ Block Diagram： Vs IN Input CGA & filter Demodulator OUT µC Oscillator Carrier frequency f0 AGC/ATC & digital control Modulated IR signal GND min 6/10 pulses Device NO: DMO-026-200 Everlight Electronics Co., Ltd. http://www.everlight.com Rev 1.0 Page: 4 of 7 ■ Application Circuit： IRM-2638S13F4 RC Filter should be connected closely between Vcc pin and GND pin. Fig.-1 Transmitter Wave Form D.U.T output Pulse Carrier frequency is adjusted to center frequency of each product. IR TANSMITTER OUTPUT WAVE FORM OUTPUT PULSE OF DEVICE Duty=0.5 Fig.-2 Measuring Method 20cm 10k +5.0± 0.1V Fig.-3 Measuring System L: Transmission Distance 10uF θ θ Vcc OUT D.U.T Vout Standard Transmitter Standard Transmitter 100k Vout GND Oscilloscope θ: Angle Of Horizontal & Vertical Direction Device NO: DMO-026-200 Everlight Electronics Co., Ltd. http://www.everlight.com Rev 1.0 Page: 5 of 7 IRM-2638S13F4 ■ TYPICAL ELECTRICAL/OPTICAL/CHARACTERISTICS CURVES Fig.-4 Relative Spectral Sensitivity vs. Wavelength Fig.-5 Relative Transmission Distance vs. Direction θ Fig.-6 Output Pulse Length vs. Arrival Distance Fig.-7 Arrival Distance vs. Supply Voltage Fig.-8 Relative Transmission Distance vs. Center Carrier Frequency Fig.-9 Arrival Distance vs. Ambient Temperature Device NO: DMO-026-200 Everlight Electronics Co., Ltd. http://www.everlight.com Rev 1.0 Page: 6 of 7 █ Reliability Test Item And Condition The reliability of products shall be satisfied with items listed below. Confidence level: 90% LTPD: 10% IRM-2638S13F4 Test Items Test Conditions 1 cycle -40℃ +25℃ +85℃ (30min)(5min)(30min) 300 cycle test Temp: +85℃ Vcc:6V 1000hrs Temp: -40℃ 1000hrs Ta: 60℃,RH:90% Vcc:6V 1000hrs Temp: 260±5℃ 10sec 4mm From the bottom of the package. Failure Judgement Criteria Samples(n) Defective(c) Temperature cycle n=22,c=0 High temperature test Low temperature storage High temperature High humidity n=22,c=0 L0≦ L×0.8 L45≦ L×0.8 n=22,c=0 L: Lower specification limit n=22,c=0 Solder heat n=22,c=0 EVERLIGHT ELECTRONICS CO., LTD. Office: No 25, Lane 76, Sec 3, Chung Yang Rd, Tel: 886-2-2267-2000, 2267-9936 Fax: 886-2267-6244, 2267-6189, 2267-6306 Device NO: DMO-026-200 Everlight Electronics Co., Ltd. http://www.everlight.com Rev 1.0 Page: 7 of 7