IRM-3638M3F99-E80

Infrared Receiver Module IRM-36XXM3F99-E8O(HFX) Series Block Diagram Pin Configuration 1. OUT 2. GND 3. VCC Features ‧High protection ability against EMI ‧Circular lens for improved reception characteristics ‧ Available for various carrier frequencies ‧ min burst length (36/38 kHz): 8 cycles ‧ min burst length (56 kHz): 10 cycles ‧ min gap length (36/38 kHz): 12 cycles ‧ min gap length (56 kHz): 14 cycles ‧ Low operating voltage and low power consumption ‧ High immunity against ambient light ‧ High immunity against TFT and PDP backlight ‧ Long reception range ‧ High sensitivity ‧ Pb free and RoHS compliant Description The IRM-36xxM3F99-E8O(HFX) devices are DIP type infrared receivers which have been developed and designed by using the latest IC technology. The PIN diode and preamplifier are assembled onto a lead frame and molded into a black epoxy package which operates as an IR filter. The demodulated output signal can directly be decoded by a microprocessor. Revision :2 1 Copyright © LifecyclePhase: 2010, Everlight All Rights Reserved. Release Date :2014/12/2 Release Date:2014-12-08 20:23:45.0 Issue No:DMO-0000412 Rev.2 www.everlight.com Expired Period: Forever DATASHEET Infrared Receiver Module IRM-36XXM3F99-E8O(HFX) Series Applications • AV equipment such as TV, VCR, DVD, CD, MD, etc. • CATV set top boxes • Multi-media Equipment • Other devices using IR remote control Application Circuit The RC Filter must be connected as close as possible to Vcc and GND pins. Parts Table Revision :2 2 Copyright © LifecyclePhase: Model No. Carrier Frequency IRM-3638M3F99-E8O(HFX) 38 kHz IRM-3656M3F99-E8O(HFX) 56 kHz 2010, Everlight All Rights Reserved. Release Date : 2014/12/2 Release Date:2014-12-08 20:23:45.0 Issue No:DMO-0000412 Rev.2 www.everlight.com Expired Period: Forever DATASHEET Infrared Receiver Module IRM-36XXM3F99-E8O(HFX) Series Absolute Maximum Ratings (Ta=25°C) Parameter Symbol Rating Unit Supply Voltage Vcc 6 V Operating Temperature Topr -20 ~ +80 ℃ Storage Temperature Tstg -40 ~ +85 ℃ Tsol 260 ℃ Soldering Temperature *1 *1 4mm from mold body for less than 5 seconds Electro-Optical Characteristics (Ta=25℃, Vcc=3V) Parameter Symbol Min. Typ. Max. Unit Condition Current consumption Icc --- 0.4 0.6 mA No input signal Supply voltage VCC 2.7 - 5.5 V λp --- 940 --- nm L0 14 --- --- m L45 6 --- --- m Half angle(horizontal) φh --- ±35 --- deg Half angle(vertical) φv --- ±35 --- deg High level pulse width TH 450 --- 750 μs Low level pulse width TL 450 --- 750 μs High level output voltage VOH Vcc-0.4 --- --- V Low level output voltage VOL --- 0.2 0.5 V Internal pull up resistor RPU 34 40 46 kΩ Peak wavelength Reception range Revision :2 3 Copyright © LifecyclePhase: 2010, Everlight All Rights Reserved. Release Date : 2014/12/2 See chapter ‚Test method’ Test signal according to figure 1 ISINK≦2mA Release Date:2014-12-08 20:23:45.0 Issue No:DMO-0000412 Rev.2 www.everlight.com Expired Period: Forever DATASHEET Infrared Receiver Module IRM-36XXM3F99-E8O(HFX) Series Test method The specified electro-optical characteristics are valid under the following conditions. 1. Measurement environment A place without extreme light reflections. 2. External light The environment contains an ordinary, white fluorescent lamp without high frequency modulation. The color temperature is 2856K and the illumination at the IR receiver is less than 10 Lux (Ev≦ 10Lux). 3. Standard transmitter The test transmitter is calibrated by using the circuit shown in figure 2. The radiation intensity of the transmitter is adjusted until Vo=400mVp-p. Both, the test transmitter and the photo diode, have a peak wavelength of 940nm. The photo diode for calibration is PD438B (λp=940nm, Vr=5V). 4. The measurement system is shown in Fig.-3 Fig.-1 Transmitter Wave Form Fig.-2 standard transmitter calibration Revision :2 4 Copyright © LifecyclePhase: 2010, Everlight All Rights Reserved. Release Date : 2014/12/2 D.U.T output Pulse Fig.-3 Measuring System Release Date:2014-12-08 20:23:45.0 Issue No:DMO-0000412 Rev.2 www.everlight.com Expired Period: Forever DATASHEET Infrared Receiver Module IRM-36XXM3F99-E8O(HFX) Series Typical Electro-Optical Characteristic Curves Revision :2 5 Copyright © LifecyclePhase: 2010, Everlight All Rights Reserved. Release Date : 2014/12/2 Release Date:2014-12-08 20:23:45.0 Issue No:DMO-0000412 Rev.2 www.everlight.com Expired Period: Forever DATASHEET Infrared Receiver Module IRM-36XXM3F99-E8O(HFX) Series Package Dimensions (Dimensions in mm) Notes: Tolerance unless otherwise mentioned ±0.3mm Revision :2 6 Copyright © LifecyclePhase: 2010, Everlight All Rights Reserved. Release Date : 2014/12/2 Release Date:2014-12-08 20:23:45.0 Issue No:DMO-0000412 Rev.2 www.everlight.com Expired Period: Forever DATASHEET Infrared Receiver Module IRM-36XXM3F99-E8O(HFX) Series Code information Protocol Suitable Protocol Suitable JVC Yes RCA No Matsushita Yes r-step Yes Mitsubishi No Sharp Yes NEC Yes Sony 12 bit Yes Panasonic Yes Sony 15 bit No RC5 Yes Sony 20 bit No RC6 Yes Toshiba Yes RCMM No XMP-1 Yes RCS-80 No Continuous Code No Device Marking Notes 1 denotes Year code 2 denotes Month code 3 denotes Device number 4 denotes Carrier frequency 5 denotes Leadframe type Packing Quantity 1500 pcs / Box 10 Boxes / Carton Revision :2 7 Copyright © LifecyclePhase: 2010, Everlight All Rights Reserved. Release Date : 2014/12/2 Release Date:2014-12-08 20:23:45.0 Issue No:DMO-0000412 Rev.2 www.everlight.com Expired Period: Forever DATASHEET Infrared Receiver Module IRM-36XXM3F99-E8O(HFX) Series DISCLAIMER 1. Above specification may be changed without notice. EVERLIGHT will reserve authority on material change for above specification. 2. The graphs shown in this datasheet are representing typical data only and do not show guaranteed values. 3. When using this product, please observe the absolute maximum ratings and the instructions for use outlined in these specification sheets. EVERLIGHT assumes no responsibility for any damage resulting from use of the product which does not comply with the absolute maximum ratings and the instructions included in these specification sheets. 4. These specification sheets include materials protected under copyright of EVERLIGHT. Reproduction in any form is prohibited without the specific consent of EVERLIGHT. 5. This product is not intended to be used for military, aircraft, automotive, medical, life sustaining or life saving applications or any other application which can result in human injury or death. Please contact authorized Everlight sales agent for special application request. Revision :2 8 Copyright © LifecyclePhase: 2010, Everlight All Rights Reserved. Release Date : 2014/12/2 Release Date:2014-12-08 20:23:45.0 Issue No:DMO-0000412 Rev.2 www.everlight.com Expired Period: Forever